Search

The cyclic oxidation behavior of fourth-generation nickel-based single crystal superalloys with 2–4 wt% Mo content were studied at 900 ℃ and 1100 ℃. At 900 ℃, with the increase of Mo content, the oxide layer accumulates more growth stress, resulting in the interface between the outer oxide layer and the inner oxide layer more prone to crack initiation. At 1100 ℃, the oxidation layer accumulates more growth stress and thermal stress, so the oxidation layer occurs large scale spalling, which is more severe in 4Mo alloy. The results show that the increase of Mo content of alloy promotes the oxidation of containing W-Re alloy, which promotes the volatilization of oxides and the spalling of oxide, decreases the protection of oxide layer, and deteriorates the oxidation resistance of the alloy. • The increase of Mo content of alloy promotes the oxidation of containing W-Re alloy. • With the increase of Mo content, the volatilization of oxides and the spalling of oxide of alloy was promoted. • Mo has more severe harm to the oxidation resistance of the alloy at higher temperature. • The alloy with 2 wt% Mo addition has the highest oxidation resistance. [ABSTRACT FROM AUTHOR]

Amorphous Al 2 O 3 coating was prepared on Ni-based single crystal superalloy via atomic layer deposition (ALD) for high temperature oxidation protection. The oxygen inward transport and outward-cation diffusion were hindered by amorphous Al 2 O 3 coating, and the coated alloy showed high oxidation resistance. The low oxygen partial pressure at the alloy/coating interface altered the alloy oxidation behavior, allowing the priority oxidation of protective Al and Cr elements. The oxidation process was controlled by the growth of Cr 2 O 3 and Al 2 O 3. The coating exhibited high spallation resistance. Degradation of the coating, the formation of NiAl 2 O 4 phase in amorphous Al 2 O 3 layer, was observed. • Amorphous Al 2 O 3 coating was proposed and prepared on Ni-based single crystal superalloy. • The amorphous Al 2 O 3 coating improved oxidation resistance and exhibited high adhesion. • The amorphous Al 2 O 3 coating altered the oxidation behavior of the alloy. • The effect mechanism of amorphous Al 2 O 3 coating on the alloy oxidation was discussed. [ABSTRACT FROM AUTHOR]