Search

Interest increased recently in manufacturing food packaging, such as films and coatings, from protein-based biopolymers. Among various protein sources, canola protein is a novel source for manufacturing polymer films. It can be concentrated or isolated by aqueous extraction technology followed by protein precipitation. Using this procedure, it was claimed that more than 99% of protein was extracted from the defatted canola meal, and protein recovery was 87.5%. Canola protein exhibits thermoplastic properties when plasticizers are present, including water, glycerol, polyethylene glycol, and sorbitol. Addition of these plasticizers allows the canola protein to undergo glass transition and facilitates deformation and processability. Normally, canola protein-based bioplastics showed low mechanical properties, which had tensile strength (TS) of 1.19 to 4.31 MPa. So, various factors were explored to improve it, including blending with synthetic polymers, modifying protein functionality through controlled denaturation, and adding cross-linking agents. Canola protein-based bioplastics were reported to have glass transition temperature,Tg, below −50°C but it highly depends on the plasticizer content. Canola protein-based bioplastics have demonstrated comparable mechanical and moisture barrier properties compared with other plant protein-based bioplastics. They have great potential in food packaging applications, including their use as wraps, sacks, sachets, or pouches. [ABSTRACT FROM PUBLISHER]

Canola Council of Canada, Winnipeg, Manitoba, Canada The rising costs of nonrenewable feedstocks and environmental concerns with their industrial usage have encouraged the study and development of renewable products, including thermoplastic starch (TPS). Starch is an abundant, plant-based biodegradable material with interesting physicochemical characteristics that can be exploited, and this has received attention for development of TPS products. Starch exhibits usable thermoplastic properties when plasticizers, elevated temperatures, and shear are present. The choice of plasticizer has an effect on TPS, even when these have similar plasticization principles. Most TPS have glass transition temperature, Tg, in the range of approximately -75 to 10°C. Glassy transition of TPS is detected by differential scanning calorimeter (DSC) and thermodynamic analyzer (DMA), although DMA has been found to be more sensitive and effective. TPS has low tensile properties, typically below 6 MPa in tensile strength (TS). The addition of synthetic polymers, nanoclay, and fiber can improve TS and water-resistance ability. The moisture sorption behavior of TPS is described in GAB and BET models, from which monolayer moisture content and specific area are derived. Current studies on surface tension, gas permeability, crystallinity, and so on of the TPS are also reviewed. [ABSTRACT FROM AUTHOR]