Search

Transition metal sulfides are low-cost oxygen evolution reaction (OER) electrocatalysts that can potentially substitute noble metal catalysts. However, the adsorption process of their OER is impeded by their intrinsic poor catalytic activity. Constructing heterojunction and vacancy defects in transition metal sulfides is an efficient method to promote the process of oxygen evolution. Herein, a facile approach based on in situ sulfurization of metal–organic gels (MOGs) and a short-time plasma treatment was developed to fabricate vacancy-modified polymetallic sulfides heterojunction. The synergistic effect of the multi-component heterojunction and sulfur vacancy contributed greatly to improving the electron migration efficiency and OER ability of the electrocatalyst. As a result, the optimum oxygen evolution activity was achieved with appropriate surface vacancy concentrations by regulating the plasma radio frequency powers. The plasma-treated catalyst under 400 W showed the best OER performance (lower overpotential of 235 mV in 1 M KOH solution with the Tafel slope of 31 mV dec−1) and good durability over 11 h of chronopotentiometry testing. This work sheds new light on constructing multimetal-based heterojunction electrocatalysts with rich vacancy defects for oxygen evolution reactions. [ABSTRACT FROM AUTHOR]

Metal–organic frameworks (MOFs) as types of proton conductive materials have attracted much attention. Here, an acylamide-functionalized 3D MOF, [Ni3(TPBTC)2(stp)2(H2O)4]·2DMA·32H2O, has been successfully constructed via combining Ni(NO3)2, TPBTC (TPBTC = benzene-1,3,5-tricarboxylic acid tris-pyridin-4-ylamide) and 2-H2stp (2-H2stp = 2-sulfoterephthalic acid monosodium salt) under solvothermal conditions. Single-crystal X-ray diffraction revealed that there are uncoordinated guest DMA molecules in the pores of the compound. On removal of guest DMA molecules, the proton conductivity of the compound increased to 2.25 × 10−3 S cm−1 at 80 °C and 98% RH which is about 110 times that of the original material. It is hoped that this work can provide essential insight for designing and obtaining improved crystalline-state proton conducting materials by considering the influences of guest molecules on proton conduction properties of porous materials. [ABSTRACT FROM AUTHOR]

Three new cucurbit[6]uril (CB[6])-based metal–organic rotaxane networks (MORNs) (named CUST-711, CUST-712, and CUST-713) functionalized by a sulfonic group (–SO3H) have been designed and synthesized via a hydrothermal method. All three compounds exhibited similar two-dimensional (2D) wave layer structures. Their stability under different temperature and relative humidity conditions has been investigated and all the compounds showed excellent stability. Furthermore, their proton conduction properties were also discussed in detail. Due to different structures and sulfonic group sites, the three compounds exhibited different proton conduction abilities of which CUST-712 exhibited an intrinsic relatively high proton conductivity (1.75 × 10−4 S cm−1 at 85 °C and 97% relative humidity). These results provide ideas for the design and synthesis of functional CB[6]-based metal–organic rotaxane frameworks (MORFs) as proton conducting materials. [ABSTRACT FROM AUTHOR]

Two new cucurbit[6]uril (CB[6])-based metal–organic rotaxane networks (MORNs) were successfully obtained by tuning the coordination sphere of metal copper clusters. Compounds 1 and 2 exhibited relatively high proton conductivity at 85 °C and 97% relative humidity (RH), providing great promise for fuel cell electrolyte materials. [ABSTRACT FROM AUTHOR]

Three new high-dimensional cucurbit[6]-based metal–organic rotaxane frameworks [Co2(PR43)(BDC)2Cl2]·4H2O (1), [Co2(PR43)(BTC)2]·6H2O (2) and [Co2(PR43)(BPT)2]·20H2O (3) were obtained via the hydrothermal synthesis method. Compound 1 comprised a two-dimensional layered structure, while compounds 2 and 3 exhibited three-dimensional pillared structures. All the compounds showed good thermal stabilities. Furthermore, the magnetic properties of compounds 1–3 were also investigated in detail. [ABSTRACT FROM AUTHOR]

The formation of metal–organic frameworks (MOFs) under given reaction conditions depends on various factors including reaction duration, temperature, used solvent, system pH, and others. Among them, the reaction duration is relatively less investigated. In this work, based on a Cu(ii)-MOF system, the reaction duration was found to play an important role in directing the formation of two different products, (NH2(CH3)2)[Cu12(DDPN)6(H2O)10Cl] (BUT-301) on shorter reaction time and (NH2(CH3)2)2[Cu(DDPN)] (BUT-302) on longer reaction time, when CuCl2 reacted with 3,5-di(3,5-dicarboxylphenyl)nitrobenzene (H4DDPN) in a DMA/MeOH mixed solvent at 120 °C. With increasing the reaction duration, BUT-301 can transform into BUT-302. Both MOFs have three-dimensional (3D) framework structures. BUT-301 is constructed from paddle-wheel Cu2(COO)4 units and DDPN4– ligands as four-connected linkers, while BUT-302 is assembled from mononuclear Cu(ii) centers connecting the ligands as also four-connected linkers but in a monodentate coordination fashion. N2 adsorption confirmed that both MOFs are porous materials with the Brunauer–Emmett–Teller (BET) surface areas of 1953 and 561 m2 g−1, respectively. Interestingly, both BUT-301 and -302 show selective adsorption properties of C3H4 over C3H6. The C3H4/C3H6 adsorption selectivities were calculated to be 1.9 and 4.4 at 0.1 bar and 298 K by the ideal adsorbed solution theory (IAST) for a 1 : 99 C3H4/C3H6 mixture, respectively. [ABSTRACT FROM AUTHOR]

Luminescent hybrid materials based on nanodiamonds (NDs) and rare earth ions have been successfully synthesized by covalently modifying NDs with pyromellitic acid (PMA) which is capable of coordinating to Eu3+ and Tb3+ ions. With NDs acting as a host matrix, the PMA and rare earth ions serve as an organic sensitizer and activator, respectively, yielding a highly bright hybrid composite. Interestingly, for the co-doped hybrid composites ND-PMA-Eu/Tb, the intensity ratio of the two emissions, 5D4→7F5 transition (Tb3+) to 5D0→7F2 transition (Eu3+), is linearly related to temperature in the range from 77 K to 277 K. Therefore, the hybrid could be developed as a self-calibrated ratiometric luminescent thermometer due to its temperature-dependent luminescence performance. [ABSTRACT FROM AUTHOR]

A top-down method was developed to synthesize hierarchical composites consisting of NiCo2O4 nanocubes and graphene nanosheets through the electrostatic interaction of negatively charged graphene oxide nanosheets and positively charged NiCo2O4 spheres. Employed as anode materials for lithium-ion batteries, the hierarchical composites exhibit remarkably high electrochemical performance, including large reversible capacity, superior rate capability, and excellent cycling performance. Large reversible capacities of 1024 and 648 mA h g−1 are maintained at a current density of 500 and 3000 mA g−1, respectively, for over 200 cycles. The excellent electrochemical performance of the composite is attributed to the synergistic effect of the hierarchical structure, the well dispersed NiCo2O4 nanocubes and the uniform graphene coating. This work provides an effective and promising strategy for the rational structural design of the metal oxide electrode material. [ABSTRACT FROM AUTHOR]

By utilizing symmetrical pentacarboxylate ligands, 3,5-di(2′,5′-dicarboxylphenyl)benzoic acid (H5L1) and 3,5-di(2′,4′-dicarboxylphenyl)benzoic acid (H5L2), two novel porous Zn-MOFs, [Zn5(μ3-H2O)2(L1)2]·3DMA·4H2O (CTGU-3) and [Zn3(μ3-OH)L2(H2O)3]·H2O (CTGU-4) have been synthesized under solvothermal conditions. CTGU-3 and CTGU-4 exhibit 3D microporous frameworks with flu and dia topologies and possess unique secondary building units [Zn5(μ3-H2O)2(RCO2)6] and [Zn3(μ3-OH)(RCO2)3], respectively. Such porous systems create a unique space or surface to accommodate Ag nanoparticles (Ag NPs), which could efficiently prevent Ag NPs from aggregation and leaching. In this work, two new Ag@Zn-MOF composites, denoted as Ag@CTGU, have been successfully fabricated through solution infiltration, for the reduction of nitrophenol. Compared with CTGU-4, CTGU-3 shows enhanced catalytic efficiency toward the reaction when it is used as a catalyst support of Ag NPs. Moreover, gas sorption and luminescence properties of two compounds were also investigated. [ABSTRACT FROM AUTHOR]

A super-stable multifunctional terbium(iii)–organic framework, namely {[Tb(TATAB) (H2O)2]·NMP·H2O}n (Tb-MOF, H3TATAB = 4,4′,4′′-s-triazine-1,3,5-triyltri-m-aminobenzoic acid, NMP = N-methyl-2-pyrrolidone) was synthesized. Tb-MOF exhibits a 2D sql structure with binuclear [Tb2(COO)4(H2O)4]2+ units as 4-connected nodes, and free water and NMP molecules are inserted between 2D layers through hydrogen-bonding interactions, forming a sandwich-type architecture. Observably, such a framework remains intact in a remarkable variety of environments such as common solvents and aqueous solutions with metal cations and inorganic anions, as well as with a pH ranging from 1 to 13. In particular, Tb-MOF can not only detect small organic molecules, metal cations and inorganic anions with high sensitivity and high selectivity, but also can accurately detect explosive 2-nitrophenol, 3-nitrophenol, 4-nitrophenol and 2,4,6-trinitrophenol in water. Its luminescence quenching response to Fe3+ and Cr2O72− ions can be explained in terms of the competitive absorption mechanism. In addition, the luminescence intensity of Tb-MOF is strongly correlated with the pH value in a pH range from 1 to 13. Thus, this material can be potentially used as a multi-responsive luminescent sensor. [ABSTRACT FROM AUTHOR]

Three polyoxovanadate-based metal–organic polyhedra (denoted as VMOP-1, -2, and -3), adopting isostructural discrete octahedral cage geometries, were successfully synthesized under solvothermal conditions. These structures are all built up from the same pentavanadate {V5O9Cl} cluster connected by linear bidentate ligands (H2L1 = H2BDC, H2L2 = H2BDC-NH2, H2L3 = H2BDC-Br), respectively. [ABSTRACT FROM AUTHOR]

Two unprecedented homochiral enantiomers based on two different kinds of rigid ligands, namely [Cd(NDC)L]2·H2O (1R and 1L), have been synthesized under hydrothermal conditions through spontaneous resolution. Their structures were determined by single-crystal X-ray diffraction analysis and further characterized by elemental analysis, IR, and thermogravimetric (TG) analysis. The resulting framework 1, constructed by four kinds of homo-handed helical chains represents the first 3D self-penetrating framework formed by decoration of single (10,3)-a net with helical chains. The single (10,3)-a net in 1 formed by three kinds of different homo-handed helical chains is different from the standard one, which should be ascribed to the usage of V-shaped ligand L. A unique self-penetration motif can be discovered in 1 where one helical chain alternately passes through 10-membered shortest circuits linked to each other and in contrary, the corresponding circuits are bound to the helical chain. Interestingly, 1 exhibits fluorescent emission in both the solid and solution phase. The uncoordinated nitrogen atom and amino group from the triazole core on the crystal surface make it suitable to detect picric acid in water. The luminescence intensity of 1 in water can be efficiently quenched by the addition of picric acid (PA). The sensitive detection of PA can be continuously performed for at least five cycles without diminishing the fluorescence intensity and destroying the framework structure of 1. The possible quenching mechanisms for PA are also investigated. [ABSTRACT FROM AUTHOR]

Six new Co(ii)-based mixed-ligand coordination polymers, namely, [Co2(H3bppc)2(2,2′-bpy)4]·H2O (1), [Co2(Hbppc)(2,2′-bpy)2(H2O)]·H2O (2), [Co(H2bppc)(H-bpp)]·2H2O (3), [Co3(μ3-OH)(bppc)(dps)(CH3CH2OH)]·4H2O (4), [Co2(bppc)(bib)(H2O)4]·(H2-bib)0.5·(H2O)3 (5), and [Co2(Hbppc)(bix)2]·2H2O (6), (H5bppc = biphenyl-2,4,6,3′,5′-pentacarboxylic acid, 2,2′-bpy = 2,2′-bipyridine, bpp = 1,3-bis(4-pyridyl)propane, dps = 4,4′-sulfanediyldipyridine, bib = 1,4-bis(imidazol-1-yl)benzene, bix = 1,4-bis(imidazol-1-ylmethyl)benzene), have been obtained under solvothermal conditions. 1 exhibits a 3D supramolecular framework based on a [Co2(H3bppc)2(2,2′-bpy)4] unit. 2 has a (3,4)-connected dmc net with a (4·82)(4·85) topology containing alternate binuclear metal clusters and single metal centres. 3 shows a 3D supramolecular architecture constructed from ladder-like arrays decorated with H-bpp. 4 exhibits a binodal (5,7)-connected 3D network based on trinuclear [Co3(μ3-OH)]5+ units with an unusual (3·46·52·6)(32·46·57·65·7) topology. 5 features a (4,6)-connected 3D fsc open framework with binuclear [Co2(H2O)(COO)]3+ units as nodes, and H2-bib and water molecules located in the voids of its framework by hydrogen bonds. 6 possesses a 3D net containing unusual 2D polyrotaxane sheets. Topological analysis reveals that 6 has a (3,4,4)-connected 3D network with a (4·6·74)(4·6·7)(6·72·102·11) topology. The structural difference of 1 and 2 is due to the different pH values of the reaction system. Though complexes 2–6 were synthesised under similar reaction conditions, the carboxylic groups of H5bppc were partially deprotonated in 2, 3 and 6 and fully deprotonated in 4 and 5. Complexes 2–6 display diverse structures depending on different N-donor ligands and the coordination modes of the multicarboxylate ligand. Variable-temperature magnetic susceptibility measurements reveal that complexes 1–6 show antiferromagnetic interactions. [ABSTRACT FROM AUTHOR]

A novel 3D organic–inorganic hybrid framework constructed from tetra-CoII-substituted sandwich-type phosphotungstates with a rare 8-connected bcu topology is reported, which exhibited highly efficient photocatalysis activity under visible light and could be used for 5 cycles without any obvious decrease in activity. [ABSTRACT FROM AUTHOR]

A unique three-dimensional metal azolate framework containing a tetranuclear copper cluster constructed by six 1,2,4-triazole units was synthesized in which the 1,2,4-triazole units show unusual bridging “crevice” coordination mode with their 1- and 2-positioned sp2 N-atoms as symmetrically bridging centers. The photocatalytic activities of as-prepared compound were tested by degradation of rhodamine-B (RB) under different light irradiation. [ABSTRACT FROM AUTHOR]

The formation of metal–organic frameworks (MOFs) under given reaction conditions depends on various factors including reaction duration, temperature, used solvent, system pH, and others. Among them, the reaction duration is relatively less investigated. In this work, based on a Cu(ii)-MOF system, the reaction duration was found to play an important role in directing the formation of two different products, (NH2(CH3)2)[Cu12(DDPN)6(H2O)10Cl] (BUT-301) on shorter reaction time and (NH2(CH3)2)2[Cu(DDPN)] (BUT-302) on longer reaction time, when CuCl2 reacted with 3,5-di(3,5-dicarboxylphenyl)nitrobenzene (H4DDPN) in a DMA/MeOH mixed solvent at 120 °C. With increasing the reaction duration, BUT-301 can transform into BUT-302. Both MOFs have three-dimensional (3D) framework structures. BUT-301 is constructed from paddle-wheel Cu2(COO)4 units and DDPN4– ligands as four-connected linkers, while BUT-302 is assembled from mononuclear Cu(ii) centers connecting the ligands as also four-connected linkers but in a monodentate coordination fashion. N2 adsorption confirmed that both MOFs are porous materials with the Brunauer–Emmett–Teller (BET) surface areas of 1953 and 561 m2 g−1, respectively. Interestingly, both BUT-301 and -302 show selective adsorption properties of C3H4 over C3H6. The C3H4/C3H6 adsorption selectivities were calculated to be 1.9 and 4.4 at 0.1 bar and 298 K by the ideal adsorbed solution theory (IAST) for a 1 : 99 C3H4/C3H6 mixture, respectively. [ABSTRACT FROM AUTHOR]