Search

Poly(ether ether ketone) (PEEK) is a high-performance thermoplastic used for several industrial applications due to its excellent mechanical properties. However, the use of PEEK is limited to dental materials because of its poor implant-bone integration. In the present study, methylated polyrotaxanes (MePRXs) with 4-vinylbenzyl groups, which are supermolecules composed of methylated α-cyclodextrins and poly(ethylene glycol) chains end-capped with 4-vinylbenzyl groups, were covalently tethered onto PEEK surfaces using photo-induced polymerization to improve their osteoblast compatibility. The surface-tethering of MePRXs onto PEEK surfaces was confirmed by analyzing their attenuated total reflectance Fourier transform infrared spectra and contact angles. When mouse preosteoblasts were cultured on the MePRX-PEEK and bare PEEK surfaces, the MePRX-PEEK surfaces showed significantly better proliferation and osteoblast differentiation than the bare PEEK surfaces. These results suggest that surface modification of PEEKs using MePRXs improves their osteoblast compatibility. [ABSTRACT FROM AUTHOR]

This study investigates the effect of pre-coating with methyl methacrylate (MMA) containing ultraviolet (UV) photoinitiators on the bond strength of poly(ether ether ketone) (PEEK). Cylindrical PEEK blocks were irradiated with 365 nm UV light for 5–20 s after they were coated with MMA containing 0.4–3.0 wt% UV photoinitiators: [1-phenyl-1,2-propanedione (PPD)], [diphenyl(2,4,6- trimethylbenzoyl) (TMDPO)], and [phenyl bis(2,4,6-trimethylbenzoyl) phosphine oxide (BTMPO)]. Pre-coated PEEKs were bonded to PEEK blocks with a MMA-based adhesive resin. The shear bond strength was measured using a universal testing machine. Secondary electron images were captured to observe failure surfaces. The data were analyzed with one- and two-way ANOVA and Tukey’s post hoc tests (p<0.05). The highest bond strength (20.7±5.1 MPa) was observed for pre-coating with MMA containing 0.4 wt% BTMPO, for 20 s of UV irradiation. Cohesive failure of the adhesive resin was observed. The use of this pre-coating led to improved bonding performance of PEEK. [ABSTRACT FROM AUTHOR]

Poly(ether ether ketone) (PEEK) is a high-performance thermoplastic used for several industrial applications due to its excellent mechanical properties. However, the use of PEEK is limited to dental materials because of its poor implant-bone integration. In the present study, methylated polyrotaxanes (MePRXs) with 4-vinylbenzyl groups, which are supermolecules composed of methylated α-cyclodextrins and poly(ethylene glycol) chains end-capped with 4-vinylbenzyl groups, were covalently tethered onto PEEK surfaces using photo-induced polymerization to improve their osteoblast compatibility. The surface-tethering of MePRXs onto PEEK surfaces was confirmed by analyzing their attenuated total reflectance Fourier transform infrared spectra and contact angles. When mouse preosteoblasts were cultured on the MePRX-PEEK and bare PEEK surfaces, the MePRX-PEEK surfaces showed significantly better proliferation and osteoblast differentiation than the bare PEEK surfaces. These results suggest that surface modification of PEEKs using MePRXs improves their osteoblast compatibility.

This study investigates the effect of pre-coating with methyl methacrylate (MMA) containing ultraviolet (UV) photoinitiators on the bond strength of poly(ether ether ketone) (PEEK). Cylindrical PEEK blocks were irradiated with 365 nm UV light for 5-20 s after they were coated with MMA containing 0.4-3.0 wt% UV photoinitiators: [1-phenyl-1,2-propanedione (PPD)], [diphenyl(2,4,6-trimethylbenzoyl) (TMDPO)], and [phenyl bis(2,4,6-trimethylbenzoyl) phosphine oxide (BTMPO)]. Pre-coated PEEKs were bonded to PEEK blocks with a MMA-based adhesive resin. The shear bond strength was measured using a universal testing machine. Secondary electron images were captured to observe failure surfaces. The data were analyzed with one- and two-way ANOVA and Tukey's post hoc tests (p<0.05). The highest bond strength (20.7±5.1 MPa) was observed for pre-coating with MMA containing 0.4 wt% BTMPO, for 20 s of UV irradiation. Cohesive failure of the adhesive resin was observed. The use of this pre-coating led to improved bonding performance of PEEK.