Search

Abstract: Delamination-free ultrafiltration (UF) dual layer hollow fibers have been successfully fabricated by dry jet-wet spinning technique. Two different polymers of poly(amide-imide) (PAI) and polyethersulfone (PES) were utilized as the selective layer on the outer side and the porous support layer on the inner side, respectively. The dual layer substrates were subsequently modified to develop a nanofiltration (NF)-like skin on the outer layer by polyethyleneimine (PEI) cross-linking followed by multilayer polyelectrolyte depositions. These membranes were characterized by a series of standard protocols in terms of membrane structure, permeability and salt rejection, and were applied in FO process. Experiments reveal that the dual-layer NF hollow fiber modified by polyelectrolyte cross-linking and depositions can achieve pure water permeability of 4.1l/m2.h.bar and a high rejection to MgCl2 up to 97%. In FO process, the dual-layer hollow fibers exhibited a water flux of 39 and 21lm−2 h−1 in the orientations of active layer facing draw solution and feed water, respectively, by using 0.5M MgCl2 as draw solution and de-ionized (DI) water as feed at room temperature. It suggests that the combined treatment of polyelectrolyte cross-linking and deposition is an effective way to form a NF-like selective layer for FO dual-layer hollow fiber membranes. [Copyright &y& Elsevier]

Abstract: Great efforts from the membrane community have been devoted in developing suitable membranes for forward osmosis (FO) applications in recent years. In the current study, the layer-by-layer (LBL) polyelectrolyte assembly technique has been successfully applied onto a microporous polyethersulfone (PES) hollow fiber substrate to make novel LBL hollow fiber membranes suitable for FO process for the first time. The FO performance of the LBL hollow fibers with different numbers of deposited layers has been evaluated using deionized (DI) water as the feed and MgCl2 solution of various concentrations as the draw solution in both orientations. With 6 layers deposited and in the active layer facing draw solution (AL-facing-DS) orientation, the membrane showed high water fluxes of 14.6, 25.9 and 40.5L/m2 h with corresponding salt to water flux, J s /J v, ratio of 0.034, 0.066 and 0.201g/L using 0.05, 0.1 and 0.5M draw solution, respectively. These promising results demonstrate the potential application of the LBL hollow fibers in FO process using low concentration draw solutions, which can substantially reduce the draw solution replenishment, and the energy consumption for draw solution regeneration and separation. [Copyright &y& Elsevier]