Search

Flow-electrode capacitive deionization (FCDI) is a new desalination technology that delivers sustainable desalination performance. However, higher desalination rate and charge efficiency of FCDI are still desired for practical applications. In this study, voltages greater than 1.23 V – the minimum voltage for water electrolysis – were applied to enhance the driving force for ion migration and adsorption in an FCDI so as to achieve higher desalination rates. When the voltage was raised from 0.6 to 4.8 V, the desalination rate increased by nearly 7 times but the charge efficiency reduced from 92% to 69.5% due to the occurrence of Faradaic reactions such as water electrolysis. The other major factor that influenced the FCDI's charge efficiency was found to be concentration diffusion of ions between the FCDI's middle chamber and the two electrode chambers. To improve the charge efficiency, carbon black (CB) particles with an average diameter of 12 μm were added to the activated carbon flow electrodes at a mixing ratio of 1.5 wt%. With that, the FCDI's charge efficiency increased from 83.5% to 96.5% at 2.4 V. Electrochemical impedance spectrometry (EIS) analysis indicates that the addition of CB particles significantly reduced the FCDI's internal resistance, thereby leading to enhanced desalination performance. [ABSTRACT FROM AUTHOR]

Conventional microbial desalination cells (MDCs) extract organic energy from wastewater for in situ desalination of saline water, but cannot treat industrial wastewater containing high strength organics that may cause blocking in the thin membrane stack. In this study, a multi-stage MDC (M-MDC) was fabricated and operated for simultaneous treatment and desalination of diluted industrial wastewater. With wastewater (COD: 8723 ± 456 mg/L, conductivity: 24,612 ± 772 μS/cm) flowing serially from anode-1 → cathode-1 → anode-2 → cathode-2, the maximum power density of the M-MDC reached 566.1 mW/m 2 , with removal efficiencies of COD, TN, NH 4 + -N, and conductivity reaching 97.8%, 90.6%, 98.4%, and 31.6% respectively with addition of 1 V external voltage. The high strength organics were significantly removed due to alternative anaerobic/oxic conditions, the nitrogen removal was enhanced by simultaneous electrical migration and biological nitrification/denitrification. Moreover, the addition of external voltage enhanced current generation (67.4 ± 3.9 mA), desalination efficiency, coulombic efficiency (14.1%), and organics removal in two anodes (47.3%), producing an effluent (COD < 500 mg/L, TN < 15 mg/L) qualified to be discharged into municipal wastewater pipe systems. These results indicated great potential of M-MDC to work as a pretreatment technology for high strength industrial wastewater. [ABSTRACT FROM AUTHOR]