Search

Increasing the surface porosity of a support membrane has been proposed as an effective way to improve the water permeability of thin-film composite (TFC) reverse osmosis (RO) membranes by reducing the diffusion pathway in the active layer. In this work, we prepared a highly porous microstructured (HPμS) support membrane with a suitable mechanical strength to enhance the water permeability of an RO membrane. The HPμS support membrane was prepared by increasing the thermodynamic instability of a 10 wt% polymer solution and thereby facilitating rapid desolvation. The rapid desolvation formed the narrow and regularly arranged pore structure in the sublayer, and we proposed the mechanism for the sublayer structure formation based on analyses of the thermodynamic properties of such a binary system. Owing to the narrow and regular structure, the HPμS support membranes showed the exceptional mechanical strength, which was comparable to the strength of support membranes used for conventional RO membranes. Also, the HPμS support membranes successfully endowed an in-house RO membrane with the performance (water permeability of 4.68 L m −2  h −1  bar −1 and NaCl rejection of 98.3%) surpassing commercial RO membranes and thin-film nanocomposite membranes recently reported in the literature. [ABSTRACT FROM AUTHOR]

One of the big challenges for forward osmosis (FO) practical application is the lack of high performance FO membranes. In this research, we successfully fabricated a novel thin film nanocomposite (TFN) FO membrane consisting of a polyetherimide (PEI) nanofibrous substrate reinforced by functionalized multi-walled carbon nanotubes (f-CNTs) and an ultrathin polyamide rejection layer. In addition to the superior inter-connected porous structure of nanofibrous substrate, the well-distributed f-CNTs in the nanofibers increased the substrate porosity by 18% and reduced membrane's structural parameter ( S value) by 30%, and significantly improved the substrate tensile modulus by 53%. The high mechanical strength provided by the embedded f-CNTs enabled us to further increase the substrate pore size and porosity in order to mitigate the internal concentration polarization (ICP). This was demonstrated by the high performance TFN-2 FO membrane with a structural parameter of 310 μm. Its water flux at 1.0 M NaCl draw solution (DS) was as high as 61 and 33 L/m 2 h in the active layer facing draw solution (AL-DS) and active layer facing feed water (AL-FW) orientations, respectively, indicating the success of the design strategy, i.e., improved membrane mechanical strength enables a further improvement of the membrane structure to mitigate the ICP. [ABSTRACT FROM AUTHOR]

Abstract: High performance flat sheet forward osmosis (FO) membranes have been successfully fabricated using Torlon® polyamide-imide (PAI) materials via phase inversion followed by polyelectrolyte polyethyleneimine (PEI) post-treatment to form a nanofiltration (NF)-like rejection layer with positive charges. The structure and charge property of the FO membranes were carefully tailored by optimizing casting conditions and selecting different immersing methods for the post-treatment. Especially, when the PAI micro-porous substrate was embedded with a woven fabric, the enhanced mechanical strength of the membrane made it possible to reduce the thickness of the substrate to 55μm, which is in favor of high water flux. The resultant membranes can reach a water flux of 29.65Lm−2 h−1 with a ratio of salt flux to water flux (J s /J v ) of <0.8gL−1 in the active layer facing draw solution (AL-facing-DS) configuration, or the water flux of 19.2Lm−2 h−1 and the J s /J v of <0.5gL−1 in the active layer facing feed water (AL-facing-FW) configuration using 0.5M MgCl2 as the draw solution and de-ionized water as the feed water at room temperature. [Copyright &y& Elsevier]

Abstract: Great efforts from the membrane community have been devoted in developing suitable membranes for forward osmosis (FO) applications in recent years. In the current study, the layer-by-layer (LBL) polyelectrolyte assembly technique has been successfully applied onto a microporous polyethersulfone (PES) hollow fiber substrate to make novel LBL hollow fiber membranes suitable for FO process for the first time. The FO performance of the LBL hollow fibers with different numbers of deposited layers has been evaluated using deionized (DI) water as the feed and MgCl2 solution of various concentrations as the draw solution in both orientations. With 6 layers deposited and in the active layer facing draw solution (AL-facing-DS) orientation, the membrane showed high water fluxes of 14.6, 25.9 and 40.5L/m2 h with corresponding salt to water flux, J s /J v, ratio of 0.034, 0.066 and 0.201g/L using 0.05, 0.1 and 0.5M draw solution, respectively. These promising results demonstrate the potential application of the LBL hollow fibers in FO process using low concentration draw solutions, which can substantially reduce the draw solution replenishment, and the energy consumption for draw solution regeneration and separation. [Copyright &y& Elsevier]

Abstract: Forward osmosis (FO) has attracted wide interest for its many potential applications. Recent developments suggest that double-skinned FO membranes may perform superiorly over conventional single-skinned ones. In this design, a dense rejection skin facing the draw solution is responsible for the separation, while a second skin facing the feed solution is designed to prevent foulants entering into the porous support layer sandwiched between the two skins. For the first time, an analytical model is developed for double-skinned FO membranes and is verified experimentally. Model simulations suggest that an optimal double-skinned membrane shall have a feed skin similar to that of a low rejection nanofiltration membrane to minimize the overall hydraulic resistant and to reduce internal concentration polarization. On the other hand, the optimization of the draw skin calls for a compromise between its water permeability and solute rejection. FO water flux is greater for support layers with higher mass transfer coefficients. In addition, it decreases with decreasing draw solution concentration and increasing feed solution concentration. While membrane orientation plays an important role for applications with low feed solution concentrations (with the denser skin preferentially facing the draw solution), this effect becomes negligible at high feed solution concentrations. [Copyright &y& Elsevier]