Search

The aim of the research was to determine the mechanical stability of angle measurement comparator’s system. For that purpose, vibrations were measured at the significant points of the system and dynamic characteristics of the system were established.

In the paper, the research on the influence of drive fixing place on dynamic properties of the precision mechatronical line scales gage calibration comparator is analyzed. With the aim to research the influence of the drive on the mechanical system of the length measurement comparator, the drive mounting position was replaced, and the friction drive was changed for the rope drive.

The study results of the historic narrow-gage railway steel truss bridge built in the last century and still used are provided in this paper. Only one of the spans results is provided herein. Field tests with the original locomotive were carried out in order to develop an analytical model that will be used to evaluate the capacity of the bridge. Responses (dynamic displacements, accelerations, mode shapes, corresponding to the resonance frequencies and modal damping values) for the construction of the bridge were found. Studies have shown that the bridge meets the requirements and has enough reserve to work safely.

Performance of optical table with pneumatic vibration isolators is analyzed within 2–50 Hz frequency range. Specific vibrational excitation platform with a vibrator of the frequency range of 1–50 Hz in one of three directions were tested.The following pneumatic vibration isolator dynamic parameters were identified:transmissibility of vertical oscillation characteristics at 50 Hz frequency range;resonant frequency (vertical direction);damping efficiency at 5 Hz to 10 Hz for excitation frequencies.

One of the indirect tensile identification methods is the measurement of the structure of the response to the vibration excitation. Then this response is simulated using digital methods. If the similarity to the response structure is achieved, the elasticity parameters can be determined. Using the methodology discussed in this work, the problem of the determination of the elasticity parameters of prints as a consisting of the paper and several layers of inks is solved. The determined parameters of prints will be used for the modeling of the printing process in web printing presses.

The essence of the considered problem is to improve line scale gauge calibration quality by studying vibrations that are induced during the calibration process. To assess the influence of vibrations it is necessary to solve a lot of scientific and technical tasks. Serious difficulties were confronted during the mathematical analysis - development of analytical model and determination of its coefficients. An in-depth analysis of line scale measurement means had to be performed to this aim, because only experimental measurements enabled to estimate the majority of coefficients.