Search

Objective: To preliminarily develop a surfactant-free, polymeric solid dispersion (PSD) of paclitaxel suitable for oral administration., Methods: A co-solvent quench method was applied to screen the proper polymer matrix of the PSD which were prepared in a liquid system using a quasi-emulsion solvent diffusion method (QESDM). Three dissolution experiments and two in vivo tests in rats were used to explain the differences among the formulations., Results: The theoretical solubility ratio of amorphous/crystalline PTX was 92.6 (37 °C). Hydroxypropyl methylcellulose acetate succinate (HPMCAS) was chosen as the polymer carrier of the PSD and a porous silicon dioxide [called white carbon black (WCB)] was selectable to be used to further adjust the dissolution rate. The absolute oral bioavailability (AOB, 20 mg/kg) of the three formulas [HPMCAS/paclitaxel/WCB = 4/1/0 (F1), 8/1/0 (F2) and 4/1/4 (F3), w/w/w] were 11.8, 13.6 and 25.6%, respectively. The AOB of F3 is nearly seven times higher than that (3.8%) of paclitaxel material (a control). The advantage of higher HPMCAS/paclitaxel ratio of F2 in a dissolution test was not reflected in the first in vivo test due to the relatively higher dose of polymer which could not be effectively dissolved under the limitation of intestinal environment. This was deduced from the dissolution tests and was finally validated when the oral dose of PTX (and thus polymer) was reduced. The relevant AOBs (10 mg/kg) were 10.4, 20.8 and 19.6%, respectively., Conclusion: The PSD is a promising formulation strategy and the QESDM is a practical preparation method to implement such formulation design.

Purpose: To develop an osmotically-driven pellet coated with polymeric film for sustained release of oxymatrine (OMT), a freely water soluble drug., Methods: Pellet containing OMT and sodium chloride (NaCl), an osmotically active agent, were prepared by extrusion/spheronization and then coated with acrylic copolymers (Eudragit(®) RS 30 D) by the fluidized bed coating process. In vitro release and swelling behavior studies were employed to optimize and to evaluate the sustained-release behavior from the osmotically-driven pellets with film coated. Finally, in vivo evaluation in rabbits was employed to investigate the sustained plasma level of OMT and its active metabolite matrine., Results: It was found that the F3 formulation, prepared with 20% NaCl and an 8% coating level, showed a continuous NaCl-induced water influx into the pellets providing a gradual sustained release of OMT for over 12 h. Finally, we confirmed that oral OMT with sustained release led to a gradual sustained plasma profile of both OMT, with a reduction in its bioavailability, and MT with an increase in the bioavailability compared with that of oral OMT with immediate release., Conclusions: The pharmaceutical parameters obtained suggested the potential usefulness of oral OMT with sustained release for the treatment of stress ulcers, as well as reducing the risk of MT-induced side effects.