Search

Very long oceanic transform faults do not just offset mid-oceanic ridges by hundreds of kilometers, but they also induce variations in the lithospheric structure and affect mantle melting, and hence the crustal accretion at the ridge-transform intersection (RTI). However, the deep structure of large offset RTIs remains unknown. Here, we present three-dimensional seismic tomography results (P- and S-wave velocities, Vp, Vs) in the vicinity of the eastern Romanche transform and the Mid-Atlantic Ridge in the equatorial Atlantic Ocean, using arrival times from microearthquakes recorded by a recent temporary array of seafloor seismometers. We find that normal to low Vp/Vs ratios (∼1.7) are observed at the Mid-Atlantic Ridge, representing weak serpentinization and the dominant magmatic processes, whereas high Vp/Vs ratios (∼1.8-1.95) are observed west of the RTI, at the eastern termination of the 2016 M w 7.1 earthquake. However, unusually low Vp/Vs ratios (∼1.6-1.7) are observed at 0-15 km depth and in the region of the 2016 M w 7.1 earthquake rupture zone. We suggest that the unusually low Vp/Vs ratios result from the presence of thick cracks at shallow depths (0-8 km) and/or the enrichment of orthopyroxene in the deep mantle (8-15 km). • 3-D Vp and Vs models for the Romanche eastern ridge-transform intersection. • Low Vp/Vs ratios (∼1.6-1.7) at depths of <15 km along the transform are observed. • The low ratios may be due to thick cracks and/or orthopyroxene enrichment. [ABSTRACT FROM AUTHOR]

Extension at slow- and intermediate-spreading mid-ocean ridges is commonly accommodated through slip on long-lived faults called oceanic detachments. These curved, convex-upward faults consist of a steeply-dipping section thought to be rooted in the lower crust or upper mantle which rotates to progressively shallower dip-angles at shallower depths. The commonly-observed result is a domed, sub-horizontal oceanic core complex at the seabed. Although it is accepted that detachment faults can accumulate kilometre-scale offsets over millions of years, the mechanism of slip, and their capacity to sustain the shear stresses necessary to produce large earthquakes, remains subject to debate. Here we present a comprehensive seismological study of an active oceanic detachment fault system on the Mid-Atlantic Ridge near 13°20′N, combining the results from a local ocean-bottom seismograph deployment with waveform inversion of a series of larger teleseismically-observed earthquakes. The unique coincidence of these two datasets provides a comprehensive definition of rupture on the fault, from the uppermost mantle to the seabed. Our results demonstrate that although slip on the deep, steeply-dipping portion of detachment faults is accommodated by failure in numerous microearthquakes, the shallow, gently-dipping section of the fault within the upper few kilometres is relatively strong, and is capable of producing large-magnitude earthquakes. This result brings into question the current paradigm that the shallow sections of oceanic detachment faults are dominated by low-friction mineralogies and therefore slip aseismically, but is consistent with observations from continental detachment faults. Slip on the shallow portion of active detachment faults at relatively low angles may therefore account for many more large-magnitude earthquakes at mid-ocean ridges than previously thought, and suggests that the lithospheric strength at slow-spreading mid-ocean ridges may be concentrated at shallow depths. [ABSTRACT FROM AUTHOR]

The Lau Basin displays large along-strike variations in ridge characters with the changing proximity of the adjacent subduction zone. The mechanism governing these changes is not well understood but one hypotheses relates them to interaction between the arc and back-arc magmatic systems. We present a 3D seismic velocity model of the shallow mantle beneath the Eastern Lau back-arc Spreading Center (ELSC) and the adjacent Tofua volcanic arc obtained from ambient noise tomography of ocean bottom seismograph data. Our seismic images reveal an asymmetric upper mantle low velocity zone (LVZ) beneath the ELSC. Two major trends are present as the ridge-to-arc distance increases: (1) the LVZ becomes increasingly offset from the ridge to the north, where crust is thinner and the ridge less magmatically active; (2) the LVZ becomes increasingly connected to a sub-arc low velocity zone to the south. The separation of the ridge and arc low velocity zones is spatially coincident with the abrupt transition in crustal composition and ridge morphology. Our results present the first mantle imaging confirmation of a direct connection between crustal properties and uppermost mantle processes at ELSC, and support the prediction that as ELSC migrates away from the arc, a changing mantle wedge flow pattern leads to the separation of the arc and ridge melting regions. Slab-derived water is cutoff from the ridge, resulting in abrupt changes in crustal lava composition and crustal porosity. The larger offset between mantle melt supply and the ridge along the northern ELSC may reduce melt extraction efficiency along the ridge, further decreasing the melt budget and leading to the observed flat and faulted ridge morphology, thinner crust and the lack of an axial melt lens. [ABSTRACT FROM AUTHOR]

Abstract: The Sumatran margin suffered three great earthquakes in recent years (Aceh-Andaman 26 December 2004 Mw=9.1, Nias 28 March 2005 Mw=8.7, Bengkulu 12 September 2007 Mw=8.5). Here we present local earthquake data from a dense, amphibious local seismic network covering a segment of the Sumatran margin that last ruptured in 1797. The occurrence of forearc islands along this part of the Sumatran margin allows the deployment of seismic land-stations above the shallow part of the thrust fault. In combination with ocean bottom seismometers this station geometry provides high quality hypocentre location for the updip end of the seismogenic zone in an area where geodetic data are also available. In this region, the Investigator Fracture Zone (IFZ), which consists of 4 sub-ridges, is subducted below the Sunda plate. This topography appears to influence seismicity at all depth intervals. A well-defined linear streak of seismicity extending from 80 to 200 km depth lies along the prolongation of closely spaced IFZ sub-ridges. More intermediate depth seismicity is located to the southeast of this string of seismicity and is related to subducted rough oceanic seafloor. The plate interface beneath Siberut Island which ruptured last in 1797 is characterised by almost complete absence of seismicity. [ABSTRACT FROM AUTHOR]

Abstract: We have determined the three-dimensional shear wave speed structure of the upper mantle in and around the Philippine Sea region using seismograms recorded by dense land-based and long-term broadband ocean bottom seismographic stations. We used a surface wave tomography technique in which multimode phase speeds are measured and inverted for a 3-D shear wave speed structure by incorporating the effects of a finite frequency and ray bending. The new ocean bottom data provided us with improved spatial resolution (~300 km) in the Philippine Sea region. In the upper 120 km, the shear wave speed structure is well correlated with seafloor age. At depths greater than 160 km, fast anomalies of the subducting Pacific Plate are clearly defined. We also found slow speed anomalies beneath the Kyushu–Palau ridge at depths greater than 120 km. Along the Izu–Bonin(Ogasawara)–Mariana arc, we have detected three separate slow anomalies in the mantle wedge at depths shallower than 100 km beneath the back arc. Each anomaly has a width of ~500 km. Moreover, these three anomalies have a close relationship with the three groups of frontal and rear arc volcanoes having distinct Sr, Nd, and Pb isotope ratios. We suggest that each of the anomalies is a site of large-scale flow of upper mantle into the mantle wedge, and that each already contains a component from the adjacent subducting slab. [Copyright &y& Elsevier]

Along the Nankai trough, southwestern Japan, the Philippine Sea plate (PSP) is subducting beneath the Eurasian plate, and large interplate earthquakes have occurred repeatedly with a recurrence interval of about 100–200 years. The most recent large thrust event in the eastern Nankai trough off Kii Peninsula was the 1944 Tonankai earthquake. In this region, current seismicity is very low and hypocenters are not determined accurately by the land seismic network. We conducted microseismicity observations around the rupture area of the 1944 Tonankai earthquake using ocean bottom seismographs (OBSs). Hypocenters were determined using a 2-D seismic velocity structure model based on an airgun-OBS seismic survey. Results obtained show that the seismicity was relatively active near the trough axis. These earthquakes may relate to deformation of the subducting Philippine Sea plate. On the other hand, microseismicity in the rupture area of the 1944 Tonankai earthquake was very low. This low-level seismic activity in the co-seismic rupture area of the 1944 Tonankai earthquake likely relates to a single large asperity off Kii Peninsula. [Copyright &y& Elsevier]

• S-to-P images the lithosphere–asthenosphere boundary near the Mid-Atlantic Ridge. • The lithosphere–asthenosphere boundary deepens with age, not always monotonically. • We infer melt in punctuated upwellings and in channels, 2 stages of melt migration. • Melt generation and migration dictate a dynamic lithosphere–asthenosphere boundary. • Rising melt may push the plates from below, and melt channels facilitate decoupling. In plate tectonic theory a weak asthenosphere is required to facilitate the motions of the rigid plates. Partial melt could weaken the mantle, in turn impacting convection, but to date the existence of persistent melt has remained controversial. A wide range of scenarios has been reported in terms of the location, amount and pathways of melt. Here we use data collected by 39 ocean bottom seismometers deployed near the equatorial Mid-Atlantic Ridge on 0 to 80 Myr old seafloor. We calculate S-to-P (Sp) receiver functions and perform waveform modeling. We jointly interpret with shear-wave velocity tomography from surface waves and magnetotelluric (MT) imaging to take advantage of a range of resolutions and sensitivities and illuminate the structure of the oceanic lithosphere and the underlying asthenosphere. We image a tectonic plate thickness that increases with age in one location but undulates in another location. We infer thin and slightly thicker melt channels and punctuated regions of ascending partial melt several hundred kilometers off the ridge axis. This suggests melt persists over geologic timescales, although its character is dynamic, with implications for the lithosphere–asthenosphere boundary (LAB) and the driving forces of the plates. Ascending melt intermittently feeds melt channels at the base of the plate. The associated melt-enhanced buoyancy increases the influence of ridge-push in driving plate motions, whereas the channelized melt reduces the resistance of the plates to motion. Therefore, melt dynamics may play a larger role in controlling plate tectonics than previously thought. [ABSTRACT FROM AUTHOR]