Search

In wind energy systems, it is necessary to have a good knowledge of the used generator and its parameters. Despite the motor manufacturer's specifications, accurately estimating the machine parameter reference values is critical for the perfect control system. In this context, off-line identification tests of a 3 kW permanent magnet synchronous machine were conducted to determine the mechanical and electrical parameters. In addition, this research exploits a meta-heuristic optimization technic dubbed grey wolf optimizer in the on-line parameter's identification field. The estimate method is focused on the parameter's estimation linked to a reference model. The rule is based on the cancelation of the current error among the measured and the associated estimated current. For each measurement, the grey wolf estimator adapts the reference model parameters until the model response and the accurate response be similar. All were implemented using the real-time interface of the DSpace DS1104 Controller card while using the ControlDesk graphical user interface and the Simulink/MATLAB environments. Results from hardware simulation confirm the efficacy and benefits of the suggested strategy. [ABSTRACT FROM AUTHOR]

Synchronous Reluctance Motors (SynRMs) have become very attractive alternatives to induction motors which have been widely used in industry in recent years. Axial-flux motor (AFM) structures have been studied in the literature as a new field. However, studies on axial-flux synchronous reluctance motors (AF-SynRMs) are very limited. In this study, optimization of an AF-SynRM has been performed to achieve optimal motor performance. In addition, the effects of the permanent magnets (PMs) have been investigated. In this design, PMs have been placed in the barriers using eight different ways, and motor performance has been examined. The placement of magnets on the barriers that are close to the air gap has an increasing effect on the average torque. However, the distorting effect on the torque ripple is seen to be quite high. In particular, the placement of magnet on all barriers improves the machine performance significantly. The negative impact on torque ripple is also low. Therefore, this study aims to provide guidance to researchers working on the design of AF-SynRMs, especially with PMs. [ABSTRACT FROM AUTHOR]