Search

This manuscript discusses a novel harmonic current excitation technique for a wound rotor synchronous machine based on control of the time harmonic magneto-motive force (MMF) for brushless operation. Two inverters are used to feed the armature winding in such a way that at a time, one inverter supplies the current to armature winding. The two inverters are 180° phase-shifted. The inverter assignment is based on time-division multiplexing technique to generate continuous armature currents containing reasonable third-harmonic component beside fundamental component. This third-harmonic current component generates pulsating MMF and is induced in the rotor harmonic winding; the induced current is rectified and applied to rotor field winding to generate rotor field. The rotor field interacts with armature fundamental current component for torque generation. Finite element analysis is performed to verify the idea. [ABSTRACT FROM AUTHOR]

Different topologies for brushless wound rotor synchronous machines (BL-WRSMs) have been proposed recently. This paper proposes a new model for the existing sub-harmonically excited BL-WRSM to eliminate the unbalanced radial force presented in the initial model. The initial and proposed models are analyzed using a two-dimensional finite element method. Furthermore, a variable-speed analysis for the BL-WRSM is conducted by altering the stator input current. Finally, a prototype of the proposed model is built and tested at the rated speed, to compare its performance with that of the conventional WRSM. Simulation and experimental results validate the proposed BL-WRSM's operation. [ABSTRACT FROM AUTHOR]

This paper proposes an inverter scheme to generate an additional third-harmonic component alongside the fundamental component of the current. The generated third-harmonic component is used to achieve the brushless operation in a wound field synchronous machine (WFSM). Contrary to the traditional schemes used, i.e., dual inverter, single inverter with extra switches schemes, and single inverter with four transistor legs, the proposed scheme comprises a single inverter with three transistor legs that utilizes a modified third-harmonic injection pulse-width modulation. The brushless operation in WFSM requires two windings on the rotor periphery, i.e., harmonic winding and field winding that are interconnected through a rotating diode bridge rectifier. To maximize the usage of generated third-harmonic component, the selection of pole–slot combinations of the machine is carried out considering the winding factors. The proposed inverter scheme is verified in MATLAB, and a 2-D finite element analysis is used to validate the brushless operation of the machine along with its electromagnetic performance. [ABSTRACT FROM AUTHOR]