Search

We report the synthesis, characterization, and performance evaluation of tungsten (W) incorporated vanadium oxide (VO2) nanocomposite cathode material for improved lithium storage performance. VO2 nanorods, 100–200 nm in diameter and 1–3 μm in length are synthesized using a hydrothermal method. W incorporation at different weight percent results in the VO2 morphology shifting from rods to a sheet type structure. The lithium storage performance of VO2 has improved remarkably by increasing the loading of W to an optimal level, which influence the intercalation/ deintercalation of lithium ions into the expanded lattices of VO2. The maximum specific capacity observed for the optimal VO2/W4 composite was 381 mAh/g at a current density of 0.1 C. Cyclic voltammetry measurements showed the presence of an electroactive V3+/V4+ redox couple, leading to lower peak separation and voltage polarization differences. Superior charge storage performance was observed with the VO2/W4 composite as compared to the VO2 based devices.

NASICON-structured Li1+xZr2-xLax(PO4)3 (x = 0–0.2) solid electrolytes are prepared by sol-gel method. The influence of substitution of La3+ for Zr4+ on the ionic conductivity, morphology, and structure of the parent compound LiZr2(PO4)3 (LZP) is investigated. Rietveld refinement of powder x-ray diffraction data reveals that the La3+ substitution stabilizes the LZP in the highly conducting rhombohedral R 3 ¯ c phase at room temperature. La3+ substituted LZP display enhanced ionic conductivity, showing the highest ionic conductivity of 0.72 × 10−4 S/cm at room temperature for the composition Li1.1Zr1.9La0.1(PO4)3. The improvement in conductivity of LZP with another aliovalent substituent, Mg2+, whose ionic radii is similar to Zr4+ (0.72 A) is also investigated. Further, the activation energy decreases from 0.53 eV for the parent LZP to 0.42 eV for x = 0.1 La3+ substituted LZP. Lithium-ion transference number obtained by direct current polarization for Li1.1Zr1.9La0.1(PO4)3 is 0.99, confirming the high ionic conducting nature of the solid electrolyte. Cyclic voltammetry recorded for Li1.1Zr1.9La0.1(PO4)3 shows electrochemical stability window up to ∼4.0 V vs. Li. In particular, La3+ substituted NASICON-type LZP (x = 0.1) exhibits good chemical and structural stability after exposing to air, water, Li metal, acidic and basic solutions.

In this article, we propose key design criteria to synthesis carbon coated α-Li3V2(PO4)3 positive electrode material for high power lithium batteries. A facile and scalable one-pot soft template method is adopted to synthesize α-Li3V2(PO4)3/C (LVP/C), which exhibits unique morphology of micron-size mesoporous secondary particles comprising interconnected primary nanoparticles showing good storage and rate performances with long cycle life. This cathode material displays high discharge capacities of 178, 90 and 59 mAh.g−1 at 0.1C, 30C and 80C, respectively. The mesoporous LVP/C with a 3D lithium diffusion network exhibits better rate performance (90 mAh.g−1 at 30C) as compared to the known phosphate, silicate or oxide cathode materials for lithium-ion batteries (LIBs). In addition, LVP/C electrode material retains 80% (at 1C) and 100% (at 20C) of its initial capacity after 1,000 cycles. The phase transitions during delitiation/litiation are discussed at different cutoff voltages, corresponding to the number of moles of lithium involved in the redox reactions. The reversibility of electrochemical extraction/insertion processes are confirmed using operando XRD measurements. Observed storage performances can be attributed not only to high crystallinity of LVP/C calcined at 800°C for 6 h; also to the unique mesoporous architecture of this carbon coated cathode material forming high packing density during the soft template synthesis. Obtained dense packed mesoporous architecture of LVP/C allows favourable (i) electrolyte wettability for lithium-incorporation from the electrolyte and (ii) long electronic wiring by the well-connected carbon coating towards the current collector.

An architecture featuring carbon coated, interconnected nano-grains constructed with mesopores is developed for LiMnPO 4 cathode material. This architecture facilitates enhanced lithium ionic and electronic transports; favours improved lithium storage performance. Mesoporous LiMnPO 4 /C electrode delivers discharge capacity of 140 mAh g −1 at 0.05 C using galvanostatic cycling mode. This best electrochemical response of LiMnPO 4 /C at constant current mode is complemented by diffusion studies using cyclic voltammetry and impedance spectroscopy. Further, the interdependence of lithium storage performance on carbon content, milling time (2, 4, 6 and 10 h), grain size and porous characteristics (surface area, pore size and pore volume) is also discussed. Finally, the feasibility of LiMnPO 4 /C cathode is evaluated against Li 4 Ti 5 O 12 /C anode in a full cell.