Search

Gas-phase electrophoresis yields size distributions of polydisperse, aerosolized analytes based on electrophoretic principles. Nanometer-sized, surface-dry, single-charged particles are separated in a high laminar sheath flow of particle-free air and an orthogonal tunable electric field. Additionally, nano Electrospray Gas-Phase Electrophoretic Mobility Molecular Analyzer (nES GEMMA) data are particle-number based. Therefore, small particles can be detected next to larger ones without a bias, for example, native proteins next to their aggregates. Analyte transition from the liquid to the gas phase is a method inherent prerequisite. In this context, nonvolatile sample buffers influence results. In the worst case, the (bio-)nanoparticle signal is lost due to an increased baseline and unspecific clustering of nonvolatile components. We present a novel online hyphenation of liquid chromatography and gas-phase electrophoresis, coupling a size-exclusion chromatography (SEC) column to an advanced nES GEMMA. Via this novel approach, it is possible to (i) separate analyte multimers already present in liquid phase from aggregates formed during the nES process, (ii) differentiate liquid phase and spray-induced multimers, and (iii) to remove nonvolatile buffer components online before SEC-nES GEMMA analysis. Due to these findings, SEC-nES GEMMA has the high potential to help to understand aggregation processes in biological buffers adding the benefit of actual size determination for noncovalent assemblies formed in solution. As detection and characterization of protein aggregation in large-scale pharmaceutical production or sizing of noncovalently bound proteins are findings directly related to technologically and biologically relevant situations, we proposed the presented method to be a valuable addition to LC-MS approaches., (© 2021 The Authors. Electrophoresis published by Wiley-VCH GmbH.)

Size, size distribution and molecular weight (MW) determination of nanoparticles and that are for example large polymers, are of great interest and pose an analytical challenge. In this context, nano electrospray gas-phase electrophoretic mobility molecular analysis (nES GEMMA) is a valuable tool with growing impact. Separation of single-charged analytes according to their electrophoretic mobility diameter (EMD) starting from single-digit EMDs up to several hundred nm diameters is possible. In case of spherical analytes, the EMD corresponds to the dry nanoparticle size. Additionally, the instrument is capable of number-based, single-particle detection following the recommendation of the European Commission for nanoparticle characterization (2011/696/EU). In case an EMD/MW correlation for a particular compound class (based on availability of well-defined standards) exists, a nanoparticle's MW can be determined from its EMD. In the present study, we focused on nES GEMMA of linear and branched, water-soluble polysaccharides forming nanoparticles and were able to obtain spectra for both analyte classes regarding single-charged species. Based on EMDs for corresponding analytes, an excellent EMD/MW correlation could be obtained in case of the branched natural polymer (dextran). This enables the determination of dextran MWs from nES GEMMA spectra despite high analyte polydispersity and in a size/MW range, where classical mass spectrometry is limited. EMD/MW correlations based on linear (pullulans, oat-ß-glucans) polymers were significantly different, possibly indicating challenges in the exact MW determination of these compounds by, for example, chromatographic and light scattering means. Despite these observations, nES GEMMA of linear, monosaccharide-based polymers enabled the determination of size and size-distribution of such dry bionanoparticles., (© 2018 The Authors. Electrophoresis published by Wiley-VCH Verlag GmbH & Co. KGaA.)

Several proteomic approaches were applied to identify protein markers providing typical signals during intact cell/spore (IC/IS) MALDI-TOF MS of two plant pathogens, namely Bremia lactucae (a downy mildew) and Oidium neolycopersici (a powdery mildew). First, proteins were extracted from intact spores of the microorganisms under conditions simulating their treatment prior to the mass spectrometric analysis. After a separation by electrophoresis and tryptic digestion, 198 and 140 proteins were identified in the B. lactucae and O. neolycopersici extracts, respectively. A large portion of them were found to be involved in the process of protein biosynthesis. For the first time, some proteins were assigned to characteristic signals in MS profiles of the investigated pathogens based on an agreement in the molecular mass. There were 9 and 10 proteins recognized, respectively, which could contribute significantly to the spectral patterns. These proteins were assigned tentatively to the following peaks in the MS profiles: (i) m/z 7828; 8593; 10 456; 11 312; 12 450; 12 763; 14 756 and 16 854 for B. lactucae; (ii) m/z 7709; 8895; 9504; 9952; 11 317; 14 082 and 14 839 for O. neolycopersici. We demonstrated the presence of ribosomal proteins and histones, which could be employed as markers in biotyping analyses for pathogen identification., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Glycosylations severely influence a protein's biological and physicochemical properties. Five exemplary proteins with varying glycan moieties were chosen to establish molecular weight (MW) determination (sizing), quantitation, and sensitivity of detection for microchip capillary gel electrophoresis (MCGE). Although sizing showed increasing deviations from literature values (SDS-PAGE or MALDI-MS) with a concomitant higher degree of analyte glycosylation, the reproducibility of MW determination and accuracy of quantitation with high sensitivity and reliability were demonstrated. Additionally, speed of analysis together with the low level of analyte consumption render MCGE attractive as an alternative to conventional SDS-PAGE., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Ammodytoxins (Atxs), a group of Ca(2+) -dependent neurotoxic phospholipases A2 of Vipera ammodytes ammodytes venom, are mainly responsible for venom toxicity. Within the Atx group, LD50 values between three isoforms, A, B, and C are differing with AtxA exhibiting an LD50 value by an order of magnitude lower (more toxic) than the other two isoforms. This difference in toxicity justifies the necessity to prepare suitable antibodies and thus isoform separation to characterize the Atx content of Vipera ammodytes ammodytes venom is of importance. However, a high homology between the three Atx isoforms (differences in only two, respectively, three residues within the last 18 amino acids at the C-terminus, total length 122 residues) hindered the successful separation of isoforms to date. As the investigated phospholipases A2 were reported to exhibit differences in pI values, we concentrate with the current work on the separation of Atx isoforms after fluorescence labeling via chip electrophoresis on a commercially available instrument to build the basis for a fast and easy to handle screening method. In the course of our work, we were able to show that samples of AtxA, AtxB, and AtxC declared to be homogenous by standard analytical techniques consisted indeed of more than one isoform of which the relative amounts were calculated by using the newly developed method., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Biodegradable nanoparticles (NPs) and hence e.g. NPs prepared from glutaraldehyde crosslinked gelatin (gelatin NPs) are lately receiving increased attention in various fields like pharmaceutical technology and nutraceutics as biocompatible carriers for hardly water soluble drugs, molecules intended for sustained release or targeted transport. However, in vivo application of such materials requires a thoroughly characterization of corresponding particles. In a previous manuscript we demonstrated the applicability of chip electrophoresis for the separation of gelatin NPs from NP building blocks. Following our previous results we intensified our efforts in the characterization of gelatin NPs by electrophoresis in the liquid (capillary and chip format) and the gas phase (gas phase electrophoretic mobility molecular analysis, GEMMA). In doing so, we demonstrated differences between nominally comparable (from the concentration of initially employed material for crosslinking) gelatin NP preparation batches concerning (i) the amount of obtained NPs, (ii) the degree of NP crosslinking, (iii) the amount of NP building blocks present within samples and (iv) the electrophoretic mobility diameter of NPs. Differences were even more pronounced when NP preparations from batches with different content of initially employed gelatin were compared. Additionally, we compared three setups for the removal of low molecular weight components from samples after fluorescence labeling of NPs. In overall, the combination of the three employed analytical methods for gelatin NP characterization - CE in the capillary and the chip format as well as GEMMA - allows a more thoroughly characterization of NP containing samples.

Recently, biodegradable nanoparticles received increasing attention for pharmaceutical applications as well as applications in the food industry. With the current investigation we demonstrate chip electrophoresis of fluorescently (FL) labeled gelatin nanoparticles (gelatin NPs) on a commercially available instrument. FL labeling included a step for the removal of low molecular mass material (especially excess dye molecules). Nevertheless, for the investigated gelatin NP preparation two analyte peaks, one very homogeneous with an electrophoretic net mobility of μ = -24.6 ± 0.3 × 10(-9) m(2) /Vs at the peak apex (n = 17) and another more heterogeneous peak with μ between approximately -27.2 ± 0.2 × 10(-9) m(2) /Vs and -36.6 ± 0.2 × 10(-9) m(2) /Vs at the peak beginning and end point (n = 11, respectively) were recorded. Filtration allowed enrichment of particles in the size range of approximately 35 nm (pore size employed for concentration of gelatin NPs) to 200 nm (pore size employed during FL labeling). This corresponded to the very homogeneous peak linking it to gelatin NPs, whereas the more heterogeneous peak probably corresponds to gelatin not cross-linked to such a high degree (NP building blocks). Several further gelatin NP preparations were analyzed according to the same protocol yielding peaks with electrophoretic net mobilities between -23.3 ± 0.3 × 10(-9) m(2) /Vs and -28.9 ± 0.2 × 10(-9) m(2) /Vs at peak apexes (n = 15 and 6). Chip electrophoresis allows analyte separation in less than two minutes (including electrophoretic sample injection). Together with the high sensitivity of the FL detection - the LOD as derived for the first main peak of the applied dye from the threefold standard deviation of the background noise values 80 pM for determined separation conditions - this leads to a very promising high throughput separation technique especially for the analysis of bionanoparticles. For gelatin NP preparations, chip electrophoresis allows for example the comparison of preparation batches concerning the amount of NPs and gelatin building blocks as well as the indirect assessment of the degree of gelatin cross-linking (from obtained FL signals)., (© 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The molecular weights (MW) of seven (glyco)proteins, of which five were plasma-derived, with MWs higher than 200 kDa were determined with three techniques: CGE-on-a-chip, SDS-PAGE and MALDI-TOF-MS. While the analysis of medium to high MW proteins with SDS-PAGE was an already well-established technique, the usefulness of MALDI-TOF-MS for the exact MW determination of high mass proteins was only partly described in literature so far. CGE-on-a-chip is the newest of all three applied techniques and was so far not applicable. Therefore, it was not evaluated for high MW (glyco)proteins. All proteins were analyzed under nonreducing as well as reducing conditions. In this work, it was demonstrated that all three described techniques were capable of determining the MW of all high molecular weight (glyco)proteins. The noncommercial CGE-on-a-chip assay allowed for the first time the electrophoretic separation of proteins in the MW range from 14 to 1000 kDa. MW assignment was limited to 500 kDa in the case of SDS-PAGE and 660 kDa in the case of the high MW CGE-on-a-chip assay. With the proper matrix and sample preparation, analysis with a standard MALDI-TOF-MS provided accurate MWs for all high MW proteins up to 1 MDa.

A novel pre-chip fluorescent derivatization method is presented for protein sizing and quantification by microchip CGE. The derivatization reaction employed a water-soluble and stable fluorescent dye and was performed under conditions that favored the formation of homogeneous reaction products. The method delivered in terms of protein sizing similar results as microchip CGE with on-chip staining but showed an extended linear dynamic range for protein quantification encompassing four orders of magnitude. The sensitivity of the method was similar to standard silver-stained planar gels. The characterization of derivatization reaction products by MS and preparative isoelectric focusing indicated that a constant degree of dye molecule tagging was obtained over a broad range of protein/dye ratios. The method allowed detecting and quantifying an impurity spiked into an antibody preparation down to a level of 0.05%. Advantages of this method compared with CGE approaches with pre-column derivatization include a shorter analysis time and an increased robustness and ease of use.

In this comparative study, a set of 13 mouse sera was investigated, which had to be checked in a fast way for homogeneity prior to complex, time-consuming and expensive proteomics analysis. SDS-PAGE and CGE-on-the-chip were compared in terms of handling, time consumption and significance of detecting differences. SDS-PAGE was a system giving good information on the samples at first sight and discrepancies for one sample were observed immediately after staining. The time consumption of up to 20 h was rather high (separation and staining procedure with 14x14 cm gels) in SDS-PAGE. CGE-on-the-chip system exhibited differences for two samples and, most important, analysis time was reduced to only 1 h. Of importance is that the serum protein pattern obtained by both methods may not represent the same proteins. Sample preparation was equal for both analytical techniques but necessary sample amount was only half of the material in the case of CGE-on-the-chip. Statistical evaluation indicated highly critical values for only one sample in SDS-PAGE and for two samples in the CGE-on-the-chip system, both in good agreement with visual observations. Three samples showed limited homogeneity with both methods. Five and six samples, respectively, were indicated as noticeable with one of the used methods.