Search

Oil–paper insulation is the critical insulation element in the modern power system. Under a harsh operating environment, oil–paper insulation will deteriorate gradually, resulting in electrical accidents. Thus, it is important to evaluate and monitor the insulation state of oil–paper insulation. Firstly, this paper introduces the geometric structure and physical components of oil–paper insulation and shows the main reasons and forms of oil–paper insulation's degradation. Then, this paper reviews the existing condition assessment techniques for oil–paper insulation, such as the dissolved gas ratio analysis, aging kinetic model, cellulose–water adsorption isotherm, oil–paper moisture balance curve, and dielectric response technique. Additionally, the advantages and limitations of the above condition assessment techniques are discussed. In particular, this paper highlights the dielectric response technique and introduces its evaluation principle in detail: (1) collecting the dielectric response data, (2) extracting the feature parameters from the collected dielectric response data, and (3) establishing the condition assessment models based on the extracted feature parameters and the machine learning techniques. Finally, two full potential studies are proposed, which research hotspots' oil–paper insulation and the electrical–chemical joint evaluation technique. In summary, this paper concludes the principles, advantages and limitation of the existing condition assessment techniques for oil–paper insulation, and we put forward two potential research avenues. [ABSTRACT FROM AUTHOR]

Forecasting has extreme importance in industry due to the numerous competitive advantages that it provides, allowing to foresee what might happen and adjust management decisions accordingly. Industries increasingly use sensors, which allow for large-scale data collection. Big datasets enable training, testing and application of complex predictive algorithms based on machine learning models. The present paper focuses on predicting values from sensors installed on a pulp paper press, using data collected over three years. The variables analyzed are electric current, pressure, temperature, torque, oil level and velocity. The results of XGBoost and artificial neural networks, with different feature vectors, are compared. They show that it is possible to predict sensor data in the long term and thus predict the asset's behaviour several days in advance. [ABSTRACT FROM AUTHOR]

The paper reports the results of a comparative assessment concerned with the effectiveness of identifying the basic forms of partial discharges (PD) measured by the acoustic emission technique (AE), carried out by application of selected machine learning methods. As part of the re-search, the identification involved AE signals registered in laboratory conditions for eight basic classes of PDs that occur in paper-oil insulation systems of high-voltage power equipment. On the basis of acoustic signals emitted by PDs and by application of the frequency descriptor that took the form of a signal power density spectrum (PSD), the assessment involved the possibility of identifying individual types of PD by the analyzed classification algorithms. As part of the research, the results obtained with the use of five independent classification mechanisms were analyzed, namely: k-Nearest Neighbors method (kNN), Naive Bayes Classification, Support Vector Machine (SVM), Random Forests and Probabilistic Neural Network (PNN). The best results were achieved using the SVM classification tuned with polynomial core, which obtained 100% accuracy. Similar results were achieved with the kNN classifier. Random Forests and Naïve Bayes obtained high accuracy over 97%. Throughout the study, identification algorithms with the highest effectiveness in identifying specific forms of PD were established. [ABSTRACT FROM AUTHOR]

The sliding window method is commonly used for non-intrusive load disaggregation. However, it is difficult to choose the appropriate window size, and the disaggregation effect is poor in low-frequency industrial environments. To better handle low-frequency industrial load data, in this paper, we propose a vertical non-intrusive load disaggregation model that is different from the sliding window method. By training multiple electrical parameters at a single point on the bus end with the corresponding load data at the branch end, the proposed method, called multiple electrical parameters to point (Mep2point), takes the electrical parameter data sampled at a single point on the bus end as its input and outputs the load data of the target device sampled at the corresponding point. First, the electrical parameters of the bus end are processed, and each item is normalized to the range from 0–1. Then, the electrical parameters are vertically arranged by their time point, and a convolutional neural network (CNN) is used to train the model. The proposed method is analyzed on low-frequency industrial user data sampled at a frequency of 1/120 Hz in the real world. We compare our method with three advanced sliding window methods, achieving an average improvement ranging from 9.23% to 22.51% in evaluation metrics, while showing substantial superiority in the actual decomposed images. Compared with three classical machine learning algorithms, our model, using the same amount of data, significantly outperforms these methods. Finally, we also compared our method with the multi-channel low window sequence-to-point (MLSP) method, which also selects multiple electrical parameters. Our model's complexity is much less than that of the MLSP model, and its performance remains high. The superiority of our model, as presented in this paper, is fully verified by experimental analysis, which can produce better actual load decomposition results from each branch and contribute to the analysis and monitoring of loads in industrial environments. [ABSTRACT FROM AUTHOR]

This document discusses the degradation and failure mechanisms of dielectric insulation in medium- and high-voltage power equipment. It highlights the importance of controlling insulation material degradation to prevent equipment failures and reduce the risk of environmental pollution. The document includes several research papers that address various topics related to the measurement, monitoring, and improvement of power equipment components. These papers cover issues such as winding breakdown faults in transformers, overvoltages caused by vacuum circuit breaker interruptions, insulation resistance degradation in cables, temperature rise in composite insulators, partial discharges and their effects on insulation, and acoustic inspection for detecting partial discharges. The document also presents studies on the technical condition of on-load tap changers, the behavior of silicone elastomers under electrical and mechanical stress, and the percolation phenomenon in square matrices. [Extracted from the article]

The recognition of the creepage discharge development process of oil–paper insulation under AC–DC combined voltage is the basis for fault monitoring and diagnosis of converter transformers; however, only a few related studies are available. In this study, the AC–DC combined voltage with a ratio of 1:1 was used to develop a recognition method for the creepage discharge development process of an oil–paper insulation under a cylinder–plate electrode structure. First, the pulse current method was used to collect the discharge signals in the creepage discharge development process. Then, 24 characteristic parameters were extracted from four types of creepage discharge characteristic spectra after dimensionality reduction. Finally, based on the online sequential extreme learning machine (OS-ELM) algorithm, these characteristic parameters were used to recognize the development stage of the creepage discharge of the oil–paper insulation. The results showed that when the size of the sample training set used in the OS-ELM algorithm is close to the number of hidden layer neurons, a high recognition accuracy can be obtained, and the type of activation function has little influence on the recognition accuracy. Four stages of the creepage discharge development process were recognized using the OS-ELM algorithm; the trend was the same as that of the characteristic parameters of the entire creepage discharge development process. The recognition accuracy was 91.4%. The algorithm has a high computing speed and high accuracy and can train data in batches. Therefore, it can be widely used in the field of online monitoring and evaluation of electrical equipment status. [ABSTRACT FROM AUTHOR]

This review paper thoroughly explores the impact of artificial intelligence on the planning and operation of distributed energy systems in smart grids. With the rapid advancement of artificial intelligence techniques such as machine learning, optimization, and cognitive computing, new opportunities are emerging to enhance the efficiency and reliability of electrical grids. From demand and generation prediction to energy flow optimization and load management, artificial intelligence is playing a pivotal role in the transformation of energy infrastructure. This paper delves deeply into the latest advancements in specific artificial intelligence applications within the context of distributed energy systems, including the coordination of distributed energy resources, the integration of intermittent renewable energies, and the enhancement of demand response. Furthermore, it discusses the technical, economic, and regulatory challenges associated with the implementation of artificial intelligence-based solutions, as well as the ethical considerations related to automation and autonomous decision-making in the energy sector. This comprehensive analysis provides a detailed insight into how artificial intelligence is reshaping the planning and operation of smart grids and highlights future research and development areas that are crucial for achieving a more efficient, sustainable, and resilient electrical system. [ABSTRACT FROM AUTHOR]

This paper reviews renewable energy integration with the electrical power grid through the use of advanced solutions at the device and system level, using smart operation with better utilisation of design margins and power flow optimisation with machine learning. This paper first highlights the significance of credible temperature measurements for devices with advanced power flow management, particularly the use of advanced fibre optic sensing technology. The potential to expand renewable energy generation capacity, particularly of existing wind farms, by exploiting thermal design margins is then explored. Dynamic and adaptive optimal power flow models are subsequently reviewed for optimisation of resource utilisation and minimisation of operational risks. This paper suggests that system-level automation of these processes could improve power capacity exploitation and network stability economically and environmentally. Further research is needed to achieve these goals. [ABSTRACT FROM AUTHOR]

Large-scale optimization (LSO) problems among photovoltaic (PV) and concentrated solar power (CSP) systems are attracting increasing attention as they help improve the energy dispatch efficiency of PV and CSP systems to minimize power costs. Therefore, it is necessary and urgent to systematically analyze and summarize various LSO methods to showcase their advantages and disadvantages, ensuring the efficient operation of hybrid energy systems comprising different PV and CSP systems. This paper compares and analyzes the latest LSO methods for PV and CSP systems based on meta-heuristic algorithms (i.e., Particle Swarm Optimization, Genetic Algorithm, Enhanced Gravitational Search Algorithm, and Grey Wolf Optimization), numerical simulation and stochastic optimization methods (i.e., Constraint Programming, Linear Programming, Dynamic Programming Optimization Algorithm, and Derivative-Free Optimization), and machine learning-based AI methods (Double Grid Search Support Vector Machine, Long Short-Term Memory, Kalman Filter, and Random Forest). An in-depth analysis and A comparison of the essence and applications of these algorithms are conducted to explore their characteristics and suitability for PV and CSP or hybrid systems. The research results demonstrate the specificities of different LSO algorithms, providing valuable insights for researchers with diverse interests and guiding the selection of the most appropriate method as the solution algorithm for LSO problems in various PV and CSP systems. This also offers useful references and suggestions for extracting research challenges in LSO problems of PV and CSP systems and proposing corresponding solutions to guide future research development. [ABSTRACT FROM AUTHOR]

The detection and deterrence of collusive agreements among firms, such as price-fixing cartels, remain pivotal in maintaining market competition. This study investigates the application of machine learning methodologies in the behavioral screening process for detecting collusion, with a specific focus on parallel pricing behaviors in the wholesale fuel market. By employing unsupervised learning techniques, this research aims to identify patterns indicative of collusion—referred to as collusion markers—within time series data. This paper outlines a comprehensive screening research plan based on the CRISP-DM model, detailing phases from business understanding to monitoring. It emphasizes the significance of machine learning methods, including distance measures, motifs, discords, and semantic segmentation, in uncovering these patterns. A case study of the Polish wholesale fuel market illustrates the practical application of these techniques, demonstrating how anomalies and regime changes in price behavior can signal potential collusion. The findings suggest that unsupervised machine learning methods offer a robust alternative to traditional statistical and econometric tools, particularly due to their ability to process large and complex datasets without predefined models. This research concludes that these methods can significantly enhance the detection of collusive behaviors, providing valuable insights for antitrust authorities. [ABSTRACT FROM AUTHOR]

The integration of renewable energy sources (RES) into smart grids has been considered crucial for advancing towards a sustainable and resilient energy infrastructure. Their integration is vital for achieving energy sustainability among all clean energy sources, including wind, solar, and hydropower. This review paper provides a thoughtful analysis of the current status of the smart grid, focusing on integrating various RES, such as wind and solar, into the smart grid. This review highlights the significant role of RES in reducing greenhouse gas emissions and reducing traditional fossil fuel reliability, thereby contributing to environmental sustainability and empowering energy security. Moreover, key advancements in smart grid technologies, such as Advanced Metering Infrastructure (AMI), Distributed Control Systems (DCS), and Supervisory Control and Data Acquisition (SCADA) systems, are explored to clarify the related topics to the smart grid. The usage of various technologies enhances grid reliability, efficiency, and resilience are introduced. This paper also investigates the application of Machine Learning (ML) techniques in energy management optimization within smart grids with the usage of various optimization techniques. The findings emphasize the transformative impact of integrating RES and advanced smart grid technologies alongside the need for continued innovation and supportive policy frameworks to achieve a sustainable energy future. [ABSTRACT FROM AUTHOR]

This paper addresses the further development and optimization of a modeling- and machine learning-based framework for early fault detection and diagnosis in induction motors. The goal behind the multi-level framework is to provide a pragmatic and practical approach for the autonomous monitoring of electrical machines in various industrial applications. The main contributions of this paper include the elimination of a fingerprint measurement in the processing of the framework and the development of a generalized model for fault detection and diagnosis. These aspects allow the training of neural networks with a simulated data set before even knowing the specific induction motor to be monitored. The pre-trained feed-forward neural networks enable the detection of several electrical and mechanical faults in a real induction motor with an overall accuracy of 99.56%. Another main contribution is the extension of the methodology to a larger operating range. As a result, various faults in a real induction motor can be detected under different load conditions with accuracies of over 92%. As a further part of the paper, a concept for a prototype is presented, which enables the autonomous and practice-friendly application of the framework. [ABSTRACT FROM AUTHOR]

With the development of smart grids and new power systems, the combination of non-intrusive load identification technology and smart home technology can provide users with the operating conditions of home appliances and equipment, thus reducing home energy loss and improving users' ability to demand a response. This paper proposes a non-intrusive load decomposition model with a parallel multiscale attention mechanism (PMAM). The model can extract both local and global feature information and fuse it through a parallel multiscale network. This improves the attention mechanism's ability to capture feature information over long time periods. To validate the model's decomposition ability, we combined the PMAM model with four benchmark models: the Long Short-Term Memory (LSTM) recurrent neural network model, the Time Pooling-based Load Disaggregation Model (TPNILM), the Extreme Learning Machine (ELM), and the Load Disaggregation Model without Parallel Multi-scalar Attention Mechanisms (UNPMAM). The model was trained on the publicly available UK-DALE dataset and tested. The models' test results were quantitatively evaluated using a confusion matrix. This involved calculating the F1 score of the load decomposition. A higher F1 score indicates better model decomposition performance. The results indicate that the PMAM model proposed in this paper maintains an F1 score above 0.9 for the decomposition of three types of electrical equipment under the same household user, which is 3% higher than that of the other benchmark models on average. In the cross-household test, the PMAM also demonstrated a better decomposition ability, with the F1 score maintained above 0.85, and the mean absolute error (MAE) decreased by 5.3% on average compared with that of the UNPMAM. [ABSTRACT FROM AUTHOR]

This paper presents a detailed review of the existing literature on peer-to-peer (P2P) energy trading considering market architectures, trading strategies, and enabling technologies. P2P energy trading enables individual users in the electricity network to act as sellers or buyers and trade energy among each other. To facilitate the discussion on different aspects of P2P energy trading, this paper focuses on P2P market mechanisms, relevant bidding strategies, and auction models. In addition, to solve the energy management problems associated with P2P energy trading, this paper investigates widely used solution methods such as game-theoretic models, mathematical optimisation, as well as more recent machine learning techniques and evaluates them in a critical manner. The outcomes of this investigation along with the identification of the challenges and limitations will allow researchers to find suitable P2P energy trading mechanisms based on different market contexts. Moreover, the discussions on potential future research directions are expected to improve the effectiveness of P2P energy trading technologies. [ABSTRACT FROM AUTHOR]

The digitization of distribution power systems has revolutionized the way data are collected and analyzed. In this paper, the critical task of harnessing this information to identify irregularities and anomalies in electricity consumption is tackled. The focus is on detecting non-technical losses (NTLs) and energy theft within distribution networks. A comprehensive overview of the methodologies employed to uncover NTLs and energy theft is presented, leveraging measurements of electricity consumption. The most common scenarios and prevalent cases of anomalies and theft among consumers are identified. Additionally, statistical indicators tailored to specific anomalies are proposed. In this research paper, the practical implementation of numerous artificial intelligence (AI) algorithms, including the artificial neural network (ANN), ANFIS, autoencoder neural network, and K-mean clustering, is highlighted. These algorithms play a central role in our research, and our primary objective is to showcase their effectiveness in identifying NTLs. Real-world data sourced directly from distribution networks are utilized. Additionally, we carefully assess how well statistical methods work and compare them to AI techniques by testing them with real data. The artificial neural network (ANN) accurately identifies various consumer types, exhibiting a frequency error of 7.62%. In contrast, the K-means algorithm shows a slightly higher frequency error of 9.26%, while the adaptive neuro-fuzzy inference system (ANFIS) fails to detect the initial anomaly type, resulting in a frequency error of 11.11%. Our research suggests that AI can make finding irregularities in electricity consumption even more effective. This approach, especially when using data from smart meters, can help us discover problems and safeguard distribution networks. [ABSTRACT FROM AUTHOR]

Reservoir productivity prediction is a key component of oil and gas field development, and the rapid and accurate evaluation of reservoir productivity plays an important role in evaluating oil field development potential and improving oil field development efficiency. Fracture-vuggy reservoirs are characterized by strong heterogeneity, complex distribution, and irregular development, causing great difficulties in the efficient prediction of fracture-vuggy reservoirs' productivity. Therefore, a PSO-BP fracture-vuggy reservoir productivity prediction model optimized by feature optimization was proposed in this paper. The Chatterjee correlation coefficient was used to select the appropriate combination of seismic attributes as the input of the prediction model, and we applied the PSO-BP model to predict oil wells' production in a typical fracture-vuggy reservoir area of Tahe Oilfield, China, with the selected seismic attributes and compared the accuracy with that provided by the BP neural network, linear support vector machine, and multiple linear regression. The prediction results using the four models based on the test set showed that compared with the other three models, the MSE of the PSO-BP model increased by 23% to 62%, the RMSE increased by 12 to 38 percent, the MAE increased by 18 to 44 percent, the SSE increased by 23 to 62 percent, and the R-square value increased by 2 to 13 percent. This comparison proves that the PSO-BP neural network model proposed in this paper is suitable for the productivity prediction of fracture-vuggy reservoirs and has better performance, which is of guiding significance for the development and production of fracture-vuggy reservoirs. [ABSTRACT FROM AUTHOR]

In recent decades, Saudi Arabia has experienced a significant surge in energy consumption as a result of population growth and economic expansion. This has presented utility companies with the formidable challenge of upgrading their facilities and expanding their capacity to keep pace with future energy demands. In order to address this issue, there is an urgent need to implement energy-saving solutions such as energy storage systems (ESSs) and renewable energy sources, which can help to reduce demand during peak hours. To ensure optimal use of ESSs, it is crucial to integrate a load forecasting model with the ESS in order to control charging and discharging rates and schedules. The irregular load profile is a particularly significant consumer of energy, consuming approximately 2.5 GWh annually at the cost of USD 3 billion in Saudi Arabia. In light of this, this paper develops a load forecasting model for the irregular load profile with a high degree of accuracy: achieving 95%. One of the key applications of this model is load peak shaving. Given the region's abundance of solar irradiation, the paper propose an integration of a solar PV system with a battery energy storage system (BESS) and analyzes various scenarios to determine the efficacy of the proposed approach. The results demonstrate significant savings when the proposed forecasting model is integrated with a BESS and PV system, with the potential to reduce monthly imported power by more than 22% during the summer season. [ABSTRACT FROM AUTHOR]

This paper addresses the problem of accurate and interpretable prediction of energy consumption in residential buildings. The solution that we propose in this work employs the knowledge discovery machine learning approach combining fuzzy systems with evolutionary optimization. The contribution of this work is twofold, including both methodology and experimental investigations. As far as methodological contribution is concerned, in this paper, we present an original designing procedure of fuzzy rule-based prediction systems (FRBPSs) for accurate and transparent energy consumption prediction in residential buildings. The proposed FRBPSs are characterized by a genetically optimized accuracy–interpretability trade-off. The trade-off optimization is carried out by means of multi-objective evolutionary optimization algorithms—in particular, by our generalization of the well-known strength Pareto evolutionary algorithm 2 (SPEA2). The proposed FRBPSs' designing procedure is our original extension and generalization (for regression problems operating on continuous outputs) of an approach to designing fuzzy rule-based classifiers (FRBCs) we developed earlier and published in 2020 in this journal. FRBCs operate on discrete outputs, i.e., class labels. The experimental contribution of this work includes designing the collection of FRBPSs for residential building energy consumption prediction using the data set published in 2024 and available from Kaggle Database Repository. Moreover, the comparison with 20 available alternative approaches is carried out, demonstrating that our approach significantly outperforms alternative methods in terms of interpretability and transparency of the energy consumption predictions made while remaining comparable or slightly superior in terms of the accuracy of those predictions. [ABSTRACT FROM AUTHOR]

Creating accurate emission models capable of capturing the variability and dynamics of modern propulsion systems is crucial for future mobility planning. This paper presents a methodology for creating THC and NOx emission models for vehicles equipped with start–stop technology. A key aspect of this endeavor is to find techniques that accurately replicate the engine's stop stages when there are no emissions. To this end, several machine learning techniques were tested using the Python programming language. Random forest and gradient boosting methods demonstrated the best predictive capabilities for THC and NOx emissions, achieving R2 scores of approximately 0.9 for engine emissions. Additionally, recommendations for effective modeling of such emissions from vehicles are presented in the paper. [ABSTRACT FROM AUTHOR]

The methods of artificial intelligence (AI) have been used in the planning and operation of electric power systems for more than 40 years. In recent years, due to the development of microprocessor and data storage technologies, the effectiveness of this use has greatly increased. This paper provides a systematic overview of the application of AI, including the use of machine learning (ML) in the electric power system. The potential application areas are divided into four blocks and the classification matrix has been used for clustering the AI application tasks. Furthermore, the data acquisition methods for setting the parameters of AI and ML algorithms are presented and discussed in a systematic way, considering the supervised and unsupervised learning methods. Based on this, three complex application examples, being wind power generation forecasting, smart grid security assessment (using two methods), and automatic system fault detection are presented and discussed in detail. A summary and outlook conclude the paper. [ABSTRACT FROM AUTHOR]

As the demand for electricity, electrification, and renewable energy rises, accurate forecasting and flexible energy management become imperative. Distribution network operators face capacity limits set by regional grids, risking economic penalties if exceeded. This study examined data-driven approaches of load forecasting to address these challenges on a city scale through a use case study of Eskilstuna, Sweden. Multiple Linear Regression was used to model electric load data, identifying key calendar and meteorological variables through a rolling origin validation process, using three years of historical data. Despite its low cost, Multiple Linear Regression outperforms the more expensive non-linear Light Gradient Boosting Machine, and both outperform the "weekly Naïve" benchmark with a relative Root Mean Square Errors of 32–34% and 39–40%, respectively. Best-practice hyperparameter settings were derived, and they emphasize frequent re-training, maximizing the training data size, and setting a lag size larger than or equal to the forecast horizon for improved accuracy. Combining both models into an ensemble could the enhance accuracy. This paper demonstrates that robust load forecasts can be achieved by leveraging domain knowledge and statistical analysis, utilizing readily available machine learning libraries. The methodology for achieving this is presented within the paper. These models have the potential for economic optimization and load-shifting strategies, offering valuable insights into sustainable energy management. [ABSTRACT FROM AUTHOR]

Increasingly stringent pollutant emission regulations and a customer demand for a high-fuel economy drive the modern automotive industry to hurriedly solve the problem of decarbonization and powertrain efficiency, leading R&D towards alternative powertrain solutions and fuels. Electrification, today, plays the biggest role in the topic, with Mild Hybrid Electrified Vehicles (MHEVs) being the most cost-effective architectures, displaying dominance in smaller markets such as Brazil. One of the biggest challenges for HEVs' development is the complexity of the hybrid control system, knowing when to actuate the electric machine, and the optimum power delivery, plus the gearshift schedule becomes a hard optimization problem that plays a key role in powertrain efficiency and cost savings for the customer. This paper proposes the implementation of a genetic algorithm (GA) as a machine learning-based control strategy to determine the torque split and the gear engaged for each driving condition of an MHEV operation, aiming to optimize fuel consumption. A quasi-static model of the vehicle was developed in Matlab/Simulink version 2022b, the virtual vehicle was then tested following the FTP75 and HWFET driving cycles. Simulation results indicate that the control decisions taken by the GA are qualitatively coherent for all operation conditions, and even quantitatively coherent in some cases, and that the software has the potential to be used as a control strategy outside the simulation environment, in future steps of development. [ABSTRACT FROM AUTHOR]

The transportation sector remains a major contributor to greenhouse gas emissions. The understanding of energy-efficient driving behaviors and utilization of energy-efficient driving strategies are essential to reduce vehicles' fuel consumption. However, there is no comprehensive investigation into energy-efficient driving behaviors and strategies. Furthermore, many state-of-the-art AI models have been applied for the analysis of eco-friendly driving styles, but no overview is available. To fill the gap, this paper conducts a thorough literature review on ecological driving behaviors and styles, and analyzes the driving factors influencing energy consumption and state-of-the-art methodologies. With a thorough scoping review process, thirty-seven articles with full text were assessed, and the methodological and related data are compared. The results show that the factors that impact driving behaviors can be summarized into eleven features including speed, acceleration, deceleration, pedal, steering, gear, engine, distance, weather, traffic signal, and road parameters. This paper finds that supervised/unsupervised learning algorithms and reinforcement learning frameworks have been popularly used to model the vehicle's energy consumption with multi-dimensional data. Furthermore, the literature shows that the driving data are collected from either simulators or real-world experiments, and the real-world data are mainly stored and transmitted by meters, controller area networks, onboard data services, smartphones, and additional sensors installed in the vehicle. Based on driving behavior factors, driver characteristics, and safety rules, this paper recommends nine energy-efficient driving styles including four guidelines for the drivers' selection and adjustment of the vehicle parameters, three recommendations for the energy-efficient driving styles in different driving scenarios, and two subjective suggestions for different types of drivers and employers. [ABSTRACT FROM AUTHOR]

Solar forecasting is becoming increasingly important due to the exponential growth in total global solar capacity each year. More photovoltaic (PV) penetration in the grid poses problems for grid stability due to the inherent intermittent and variable nature of PV power production. Therefore, forecasting of solar quantities becomes increasingly important to grid operators and market participants. This review presents the most recent relevant studies focusing on short-term forecasting of solar irradiance and PV power production. Recent research has increasingly turned to machine learning to address this challenge. The paper provides a discussion about building a solar forecasting model, including evaluation measures and machine learning method selection through analysed literature. Given that machine learning is data-driven, the focus of this review has been placed on data sources referenced in the literature. Open-access data sources have been compiled and explored. The main contribution of this paper is the establishment of a benchmark for assessing the performance of solar forecasting models. This benchmark utilizes the mentioned open-source datasets, offering a standardized platform for future research. It serves the crucial purpose of streamlining investigations and facilitating direct comparisons among different forecasting methodologies in the field of solar forecasting. [ABSTRACT FROM AUTHOR]

In the modern era, where the global energy sector is transforming to meet the decarbonization goal, cutting-edge information technology integration, artificial intelligence, and machine learning have emerged to boost energy conversion and management innovations. Incorporating artificial intelligence and machine learning into energy conversion, storage, and distribution fields presents exciting prospects for optimizing energy conversion processes and shaping national and global energy markets. This integration rapidly grows and demonstrates promising advancements and successful practical implementations. This paper comprehensively examines the current state of applying artificial intelligence and machine learning algorithms in energy conversion and management evaluation and optimization tasks. It highlights the latest developments and the most promising algorithms and assesses their merits and drawbacks, encompassing specific applications and relevant scenarios. Furthermore, the authors propose recommendations to emphasize the prioritization of acquiring real-world experimental and simulated data and adopting standardized, explicit reporting in research publications. This review paper includes details on data size, accuracy, error rates achieved, and comparisons of algorithm performance against established benchmarks. [ABSTRACT FROM AUTHOR]

Furan tests provide a non-intrusive and cost-effective method of estimating the degradation of paper insulation, which is critical for ensuring the reliability of power grids. However, conducting routine furan tests can be expensive and challenging, highlighting the need for alternative methods, such as machine learning algorithms, to predict furan concentrations. To establish the generalizability and robustness of the furan prediction model, this study investigates two distinct datasets from different geographical locations, Utility A and Utility B. Three scenarios are proposed: in the first scenario, a round-robin cross-validation method was used, with 75% of the data for training and the remaining 25% for testing. The second scenario involved training the model entirely on Utility A and testing it on Utility B. In the third scenario, the datasets were merged, and round-robin cross-validation was applied, similar to the first scenario. The findings reveal the effectiveness of machine learning algorithms in predicting furan concentrations, and particularly the stacked generalized ensemble method, offering a non-intrusive and cost-effective alternative to traditional testing methods. The results could significantly impact the maintenance strategies of power and distribution transformers, particularly in regions where furan testing facilities are not readily available. [ABSTRACT FROM AUTHOR]

Photovoltaic (PV) fault detection is crucial because undetected PV faults can lead to significant energy losses, with some cases experiencing losses of up to 10%. The efficiency of PV systems depends upon the reliable detection and diagnosis of faults. The integration of Artificial Intelligence (AI) techniques has been a growing trend in addressing these issues. The goal of this systematic review is to offer a comprehensive overview of the recent advancements in AI-based methodologies for PV fault detection, consolidating the key findings from 31 research papers. An initial pool of 142 papers were identified, from which 31 were selected for in-depth review following the PRISMA guidelines. The title, objective, methods, and findings of each paper were analyzed, with a focus on machine learning (ML) and deep learning (DL) approaches. ML and DL are particularly suitable for PV fault detection because of their capacity to process and analyze large amounts of data to identify complex patterns and anomalies. This study identified several AI techniques used for fault detection in PV systems, ranging from classical ML methods like k-nearest neighbor (KNN) and random forest to more advanced deep learning models such as Convolutional Neural Networks (CNNs). Quantum circuits and infrared imagery were also explored as potential solutions. The analysis found that DL models, in general, outperformed traditional ML models in accuracy and efficiency. This study shows that AI methodologies have evolved and been increasingly applied in PV fault detection. The integration of AI in PV fault detection offers high accuracy and effectiveness. After reviewing these studies, we proposed an Artificial Neural Network (ANN)-based method for PV fault detection and classification. [ABSTRACT FROM AUTHOR]

The growing success of smart grids (SGs) is driving increased interest in load forecasting (LF) as accurate predictions of energy demand are crucial for ensuring the reliability, stability, and efficiency of SGs. LF techniques aid SGs in making decisions related to power operation and planning upgrades, and can help provide efficient and reliable power services at fair prices. Advances in artificial intelligence (AI), specifically in machine learning (ML) and deep learning (DL), have also played a significant role in improving the precision of demand forecasting. It is important to evaluate different LF techniques to identify the most accurate and appropriate one for use in SGs. This paper conducts a systematic review of state-of-the-art forecasting techniques, including traditional techniques, clustering-based techniques, AI-based techniques, and time series-based techniques, and provides an analysis of their performance and results. The aim of this paper is to determine which LF technique is most suitable for specific applications in SGs. The findings indicate that AI-based LF techniques, using ML and neural network (NN) models, have shown the best forecast performance compared to other methods, achieving higher overall root mean squared (RMS) and mean absolute percentage error (MAPE) values. [ABSTRACT FROM AUTHOR]

Traditional machine learning prediction methods usually only predict input parameters through a single model, so the problem of low prediction accuracy is common. Different predictive models extract different information for input, and combining different predictive models can make as much use as possible of all the information contained in the inputs. Therefore, this paper improves the existing oil temperature prediction method of offshore wind turbine gearboxes, and for the actual prediction effect of Supervisory Control And Data Acquisition (SCADA) data in this paper, Bayesian-optimized Light Gradient Boosting Machine (LightGBM) and eXtreme Gradient Boosting(XGBoost) machine learning models are selected to be combined. A method based on the Induced Ordered Weighted Average (IOWA) operator combination prediction model is thus proposed, with simulation results showing that the proposed model improves the accuracy of gearbox condition monitoring. The innovation of this article lies in considering the various negative impacts faced by actual offshore wind turbines and adopting a combination prediction model to improve the accuracy of gearbox condition monitoring. [ABSTRACT FROM AUTHOR]

Waste disposal remains a challenge due to land availability, and environmental and health issues related to the main disposal method, landfilling. Combining computer vision (machine learning) and robotics to sort waste is a cost-effective solution for landfilling activities limitation. The objective of this study was to combine transfer and ensemble learning to process collected waste images and classify landfill waste into nine classes. Pretrained CNN models (Inception–ResNet-v2, EfficientNetb3, and DenseNet201) were used as base models to develop the ensemble network, and three other single CNN models (Models 1, 2, and 3). The single network performances were compared to the ensemble model. The waste dataset, initially grouped in two classes, was obtained from Kaggle, and reorganized into nine classes. Classes with a low number of data were improved by downloading additional images from Google search. The Ensemble Model showed the highest prediction precision (90%) compared to the precision of Models 1, 2, and 3, 86%, 87%, and 88%, respectively. All models had difficulties predicting overlapping classes, such as glass and plastics, and wood and paper/cardboard. The environmental costs for the Ensemble network, and Models 2 and 3, approximately 15 g CO2 equivalent per training, were lower than the 19.23 g CO2 equivalent per training for Model 1. [ABSTRACT FROM AUTHOR]

Distributed generators (DGs) have a high penetration rate in distribution networks (DNs). Understanding their impact on a DN is essential for achieving optimal power flow (OPF). Various DG models, such as stochastic and forecasting models, have been established and are used for OPF. While conventional OPF aims to minimize operational costs or power loss, the "Dual-Carbon" target has led to the inclusion of carbon emission reduction objectives. Additionally, state-of-the-art optimization techniques such as machine learning (ML) are being employed for OPF. However, most current research focuses on optimization methods rather than the problem formulation of the OPF. The purpose of this paper is to provide a comprehensive understanding of the OPF problem and to propose potential solutions. By delving into the problem formulation and different optimization techniques, selecting appropriate solutions for real-world OPF problems becomes easier. Furthermore, this paper provides a comprehensive overview of prospective advancements and conducts a comparative analysis of the diverse methodologies employed in the field of optimal power flow (OPF). While mathematical methods provide accurate solutions, their complexity may pose challenges. On the other hand, heuristic algorithms exhibit robustness but may not ensure global optimality. Additionally, machine learning techniques exhibit proficiency in processing extensive datasets, yet they necessitate substantial data and may have limited interpretability. Finally, this paper concludes by presenting prospects for future research directions in OPF, including expanding upon the uncertain nature of DGs, the integration of power markets, and distributed optimization. The main objective of this review is to provide a comprehensive understanding of the impact of DGs in DN on OPF. The article aims to explore the problem formulation of OPF and to propose potential solutions. By gaining in-depth insight into the problem formulation and different optimization techniques, optimal and sustainable power flow in a distribution network can be achieved, leading to a more efficient, reliable, and cost-effective power system. This offers tremendous benefits to both researchers and practitioners seeking to optimize power system operations. [ABSTRACT FROM AUTHOR]

As the penetration of renewable energy sources into a power system increases, the significance of precise short-term forecasts for wind power generation becomes paramount. However, the erratic and non-periodic nature of wind poses challenges in accurately predicting the output. This paper presents a comprehensive investigation into forecasting wind power generation for the following day, using three machine learning models: long short-term memory (LSTM), convolutional neural network-bidirectional LSTM (CNN-biLSTM), and light gradient boosting machine (LGBM). In addition, this paper proposes a method to improve the prediction performance of LGBM by separating data according to the distribution of features, and training and testing each separated dataset with a distinct model. This study includes a comparative analysis of the performance of the proposed models in predicting wind turbine output, offering valuable insights into their respective efficiencies. The results of this investigation were analyzed for two geographically distinct wind farms (Korea and the UK). The findings of this study are expected to facilitate the selection of efficient prediction models within the forecast accuracy auxiliary service market and assist grid operators in ensuring reliable power supply for the grid. [ABSTRACT FROM AUTHOR]

There is a growing demand for Green AI (Artificial Intelligence) technologies in the market and society, as it emerges as a promising technology. Green AI technologies are used to create sustainable solutions and reduce the environmental impact of AI. This paper focuses on describing the services of Green AI and the challenges associated with it at the community level. This article also highlights the accuracy levels of machine learning algorithms for various time periods. The process of choosing the appropriate input parameters for weather, locations, and complexity is outlined in this paper to examine the ML algorithms. For correcting the algorithm performance parameters, metrics like RMSE (root mean square error), MSE (mean square error), MAE (mean absolute error), and MPE (mean percentage error) are considered. Considering the performance and results of this review, the LSTM (long short-term memory) performed well in most cases. This paper concludes that highly advanced techniques have dramatically improved forecasting accuracy. Finally, some guidelines are added for further studies, needs, and challenges. However, there is still a need for more solutions to the challenges, mainly in the area of electricity storage. [ABSTRACT FROM AUTHOR]

Operating nuclear power plants (NPPs) generate and collect large amounts of equipment reliability (ER) element data that contain information about the status of components, assets, and systems. Some of this information is in textual form where the occurrence of abnormal events or maintenance activities are described. Analyses of NPP textual data via natural language processing (NLP) methods have expanded in the last decade, and only recently the true potential of such analyses has emerged. So far, applications of NLP methods have been mostly limited to classification and prediction in order to identify the nature of the given textual element (e.g., safety or non-safety relevant). In this paper, we target a more complex problem: the automatic generation of knowledge based on a textual element in order to assist system engineers in assessing an asset's historical health performance. The goal is to assist system engineers in the identification of anomalous behaviors, cause–effect relations between events, and their potential consequences, and to support decision-making such as the planning and scheduling of maintenance activities. "Knowledge extraction" is a very broad concept whose definition may vary depending on the application context. In our particular context, it refers to the process of examining an ER textual element to identify the systems or assets it mentions and the type of event it describes (e.g., component failure or maintenance activity). In addition, we wish to identify details such as measured quantities and temporal or cause–effect relations between events. This paper describes how ER textual data elements are first preprocessed to handle typos, acronyms, and abbreviations, then machine learning (ML) and rule-based algorithms are employed to identify physical entities (e.g., systems, assets, and components) and specific phenomena (e.g., failure or degradation). A few applications relevant from an NPP ER point of view are presented as well. [ABSTRACT FROM AUTHOR]

Fuel cell hybrid electric trucks have become a cutting-edge field in understanding urban traffic emissions due to their enormous potential in low-carbon areas. In order to improve the economy of fuel cell hybrid electric trucks and reduce the decline of fuel cell lifespan, this paper proposes a multi-objective energy management strategy that optimizes weight coefficients. On the basis of establishing a fuel cell battery hybrid system model, three modes of uniform speed, acceleration, and deceleration were identified through clustering analysis of vehicle speed. Reinforcement learning algorithms were used to learn the corresponding weights for different modes, which reduced the decline in fuel cell life while improving the economic efficiency. The simulation results indicate that, under the conditions of no load, half load, and full load, the truck only sacrificed 0.9–5.6%, 1.7–2.6%, and 1.2–1.6% SOC, saving 5.7–6.45%, 5.9–6.67%, and 6.1–6.67% in lifespan loss, and reducing hydrogen consumption by 3.0–7.1%, 2.8–4.4%, and 1.0–3.0%, respectively. [ABSTRACT FROM AUTHOR]

Under the premise of ensuring the safe and stable operation of a wind–thermal–storage power system, this paper proposes an optimization model aimed at improving its overall economic efficiency and effectively reducing the peak-to-valley load difference. The model transforms the multi-objective optimization problem to solve a feasible interval of weight coefficients. We introduce a novel fusion model, where a Convolutional Neural Network (CNN) is melded with a Long Short-Term Memory Network (LSTM) to form the target network structure. Additionally, for datasets with limited samples, we incorporate a Self-Attention Mechanism (SAM) into the Model-Agnostic Meta-Learning (MAML). Ultimately, we build an MAML-SAM-CNN-LSTM network model to solve the interval of weight coefficients. An arithmetic validation of a modified IEEE 30-node system demonstrates that the MAML-SAM-CNN-LSTM network proposed in this paper can adeptly solve the feasible intervals of weight coefficients in the optimization model of the wind-thermal storage system. This is achieved under the constraints of the specified wind-thermal storage power system operation indexes. The evaluation indexes of the network model, including its accuracy, precision, recall, and F1 score, all exceed 98.72%, 98.57%, 98.30%, and 98.57%, respectively. This denotes a superior performance compared to the other three network models, offering an effective reference for optimizing decision-making and facilitating the enhanced realization of multi-objective, on-demand scheduling in the wind-thermal storage power system. [ABSTRACT FROM AUTHOR]

Modern electrical power systems are characterized by a high rate of transient processes, the use of digital monitoring and control systems, and the accumulation of a large amount of technological information. The active integration of renewable energy sources contributes to reducing the inertia of power systems and changing the nature of transient processes. As a result, the effectiveness of emergency control systems decreases. Traditional emergency control systems operate based on the numerical analysis of power system dynamic models. This allows for finding the optimal set of preventive commands (solutions) in the form of disconnections of generating units, consumers, transmission lines, and other primary grid equipment. Thus, the steady-state or transient stability of a power system is provided. After the active integration of renewable sources into power systems, traditional emergency control algorithms became ineffective due to the time delay in finding the optimal set of control actions. Currently, machine learning algorithms are being developed that provide high performance and adaptability. This paper contains a meta-analysis of modern emergency control algorithms for power systems based on machine learning and synchronized phasor measurement data. It describes algorithms for determining disturbances in the power system, selecting control actions to maintain transient and steady-state stability, stability in voltage level, and limiting frequency. This study examines 53 studies piled on the development of a methodology for analyzing the stability of power systems based on ML algorithms. The analysis of the research is carried out in terms of accuracy, computational latency, and data used in training and testing. The most frequently used textual mathematical models of power systems are determined, and the most suitable ML algorithms for use in the operational control circuit of power systems in real time are determined. This paper also provides an analysis of the advantages and disadvantages of existing algorithms, as well as identifies areas for further research. [ABSTRACT FROM AUTHOR]

Accurate load forecasting is essential for the efficient and reliable operation of power systems. Traditional models primarily utilize unidirectional data reading, capturing dependencies from past to future. This paper proposes a novel approach that enhances load forecasting accuracy by fine tuning an attention-based model with a bidirectional reading of time-series data. By incorporating both forward and backward temporal dependencies, the model gains a more comprehensive understanding of consumption patterns, leading to improved performance. We present a mathematical framework supporting this approach, demonstrating its potential to reduce forecasting errors and improve robustness. Experimental results on real-world load datasets indicate that our bidirectional model outperforms state-of-the-art conventional unidirectional models, providing a more reliable tool for short and medium-term load forecasting. This research highlights the importance of bidirectional context in time-series forecasting and its practical implications for grid stability, economic efficiency, and resource planning. [ABSTRACT FROM AUTHOR]

Short-term load forecasting is a challenging research problem and has a tremendous impact on electricity generation, transmission, and distribution. A robust forecasting algorithm can help power system operators to better tackle the ever-changing electric power demand. This paper presents a novel deep neural network for short-term electric load forecasting for the St. John's campus of Memorial University of Newfoundland (MUN). The electric load data are obtained from the Memorial University of Newfoundland and combined with metrological data from St. John's. This dataset is used to formulate a multivariate time-series forecasting problem. A novel deep learning algorithm is presented, consisting of a 1D Convolutional Neural Network, which is followed by an encoder–decoder-based network with attention. The input used for this model is the electric load consumption and metrological data, while the output is the hourly prediction of the next day. The model is compared with Gated Recurrent Unit (GRU) and Long Short Term Memory (LSTM)-based Recurrent Neural Network. A CNN-based encoder–decoder model without attention is also tested. The proposed model shows a lower mean absolute error (MAE), mean squared error (MSE), mean absolute percentage error (MAPE), and higher R2 score. These evaluation metrics show an improved performance compared to GRU and LSTM-based RNNs as well as the CNN encoder–decoder model without attention. [ABSTRACT FROM AUTHOR]

Forecasting the electricity market, even in the short term, is a difficult task, due to the nature of this commodity, the lack of storage capacity, and the multiplicity and volatility of factors that influence its price. The sensitivity of the market results in the appearance of anomalies in the market, during which forecasting models often break down. The aim of this paper is to present the possibility of using hybrid machine learning models to forecast the price of electricity, especially when such events occur. It includes the automatic detection of anomalies using three different switch types and two independent forecasting models, one for use during periods of stable markets and the other during periods of anomalies. The results of empirical tests conducted on data from the Polish energy market showed that the proposed solution improves the overall quality of prediction compared to using each model separately and significantly improves the quality of prediction during anomaly periods. [ABSTRACT FROM AUTHOR]

A photovoltaic (PV) power forecasting prediction is a crucial stage to utilize the stability, quality, and management of a hybrid power grid due to its dependency on weather conditions. In this paper, a short-term PV forecasting prediction model based on actual operational data collected from the PV experimental prototype installed at the engineering college of Misan University in Iraq is designed using various machine learning techniques. The collected data are initially classified into three diverse groups of atmosphere conditions—sunny, cloudy, and rainy meteorological cases—for various seasons. The data are taken for 3 min intervals to monitor the swift variations in PV power generation caused by atmospheric changes such as cloud movement or sudden changes in sunlight intensity. Then, an artificial neural network (ANN) technique is used based on the gray wolf optimization (GWO) and genetic algorithm (GA) as learning methods to enhance the prediction of PV energy by optimizing the number of hidden layers and neurons of the ANN model. The Python approach is used to design the forecasting prediction models based on four fitness functions: R2, MAE, RMSE, and MSE. The results suggest that the ANN model based on the GA algorithm accommodates the most accurate PV generation pattern in three different climatic condition tests, outperforming the conventional ANN and GWO-ANN forecasting models, as evidenced by the highest Pearson correlation coefficient values of 0.9574, 0.9347, and 0.8965 under sunny, cloudy, and rainy conditions, respectively. [ABSTRACT FROM AUTHOR]

The intermittent and stochastic nature of Renewable Energy Sources (RESs) necessitates accurate power production prediction for effective scheduling and grid management. This paper presents a comprehensive review conducted with reference to a pioneering, comprehensive, and data-driven framework proposed for solar Photovoltaic (PV) power generation prediction. The systematic and integrating framework comprises three main phases carried out by seven main comprehensive modules for addressing numerous practical difficulties of the prediction task: phase I handles the aspects related to data acquisition (module 1) and manipulation (module 2) in preparation for the development of the prediction scheme; phase II tackles the aspects associated with the development of the prediction model (module 3) and the assessment of its accuracy (module 4), including the quantification of the uncertainty (module 5); and phase III evolves towards enhancing the prediction accuracy by incorporating aspects of context change detection (module 6) and incremental learning when new data become available (module 7). This framework adeptly addresses all facets of solar PV power production prediction, bridging existing gaps and offering a comprehensive solution to inherent challenges. By seamlessly integrating these elements, our approach stands as a robust and versatile tool for enhancing the precision of solar PV power prediction in real-world applications. [ABSTRACT FROM AUTHOR]

In the current era of energy conservation and emission reduction, the development of electric and other new energy vehicles is booming. With their various attributes, lithium batteries have become the ideal power source for new energy vehicles. However, lithium-ion batteries are highly sensitive to temperature changes. Excessive temperatures, either high or low, can lead to abnormal operation of the batteries, posing a threat to the safety of the entire vehicle. Therefore, developing a reliable and efficient Battery Thermal Management System (BTMS) that can monitor battery status and prevent thermal runaway is becoming increasingly important. In recent years, deep learning has gradually become widely applied in various fields as an efficient method, and it has also been applied to some extent in the development of BTMS. In this work, we discuss the basic principles of deep learning and related optimization principles and elaborate on the algorithmic principles, frameworks, and applications of various advanced deep learning methods in BTMS. We also discuss several emerging deep learning algorithms proposed in recent years, their principles, and their feasibility in BTMS applications. Finally, we discuss the obstacles faced by various deep learning algorithms in the development of BTMS and potential directions for development, proposing some ideas for progress. This paper aims to analyze the advanced deep learning technologies commonly used in BTMS and some emerging deep learning technologies and provide new insights into the current combination of deep learning technology in new energy trams to assist the development of BTMS. [ABSTRACT FROM AUTHOR]

This paper presents an innovative design for an interior permanent magnet synchronous motor (IPMSM), targeting enhanced performance for electric vehicle (EV) applications. The proposed motor features a double V-shaped rotor structure with irregular ferrite magnets embedded in the slots between the permanent magnets. This design significantly enhances torque performance. Furthermore, a machine learning-based surrogate model is developed by integrating fine and coarse mesh data. Optimized using the Non-dominated Sorting Genetic Algorithm II (NSGA-II), this surrogate model effectively reduces computational time compared to traditional finite element analysis (FEA). [ABSTRACT FROM AUTHOR]

Electrical utilities performance is measured by various indicators, of which the most important are very dependent on the interruption time after a failure in the network has occurred, such as SAIDI. Therefore, they are constantly looking for new techniques to decrease the fault location and repair times. A possibility to innovate in this field is to estimate the failed network component when a fault occurs. This paper presents the conclusion of an analysis carried out by the authors with the aim to estimate failure types of underground MV networks based on observable indirect variables. The variables needed to carry out the analysis must be available shortly after the failure occurrence, which is facilitated by a smart-grid infrastructure, to allow for a quick estimation. This paper uses the groundwork already carried out by the authors on ambient variables, historical variables, and disturbance recordings to design an estimator to predict between four MV cable network failure types. The paper presents relevant analyses on the design and performance of various machine learning classification algorithms for estimation of the types of MV cable network failures using real-world data. Optimization of performance was carried out, resulting in an estimator with an overall 68% accuracy rate. Accuracy rates of 94% for cable failure, 63% for excavations, and 79% secondary busbar failures were achieved; as for cable joints, the accuracy was poor due to the difficulty to identify a feature that can be used to separate this failure type from cable failures. Future work to improve that accuracy is discussed. [ABSTRACT FROM AUTHOR]

At this stage, the inspection of transmission lines is dominated by UAV inspection. Insulators, as essential equipment for transmission line equipment, are susceptible to various factors during UAV detection, and their detection results often lead to leakages and false detection. Combining deep learning detection algorithms with the UAV transmission line inspection system can effectively solve the current sensing problem. To improve the recognition accuracy of insulator detection, the MS-COCO pre-training strategy that combines the FPN module with a cascading R-CNN algorithm based on the ResNeXt-101 network is proposed. The purpose of this paper is to systematically and comprehensively analyze mainstream isolator detection algorithms at the current stage and to verify the effectiveness of the improved Cascade R-CNN X101 model by combining the mAP (mean Average Precision) value and other related evaluation indices. Compared with Faster R-CNN, Retina Net, and other detection algorithms, the model is highly accurate and can effectively deal with the false detection, leakage, and non-recognition of the environment in online special detection. The research in this paper provides a new idea for intelligent fault detection of transmission line insulators and has some reference value for engineering applications. [ABSTRACT FROM AUTHOR]

Indoor environmental parameters are closely related to the energy consumption and indoor thermal comfort of office buildings. Predicting these parameters, especially indoor temperature, can contribute to the management of energy consumption and thermal comfort levels in office buildings. An accurate indoor temperature prediction model is the basis for implementing this process. To this end, this paper first discusses the input and output parameters of the model, and then it compares the prediction effects of mainstream prediction model algorithms based on data mining under the same data conditions. The superiority of the XGBoost integrated learning algorithm is verified, and a further XGBoost-based indoor temperature online prediction method is designed. The effectiveness of the method is validated using actual data from a commercial office building in Haidian District, Beijing. Finally, optimization methods for the prediction method are discussed with regard to the scheduler mechanism proposed in this paper. Overall, this work can assist building operators in optimizing HVAC equipment running strategies, thus improving the indoor thermal comfort and energy efficiency of the building. [ABSTRACT FROM AUTHOR]

Drying processes are among the most energy-intensive industrial processes. There is a need for development of the efficient methods needed for estimating, measuring, and reducing energy use. Different machine learning algorithms might provide some of the answers to these issues in a faster and less costly way, without the need for time-consuming and expensive experiments done at different scales of the dryers. The aim of this paper was to provide a comprehensive overview of machine learning applications for addressing energy-related challenges by exploration of different energy types and energy reduction opportunities. Also, the analysis of the applied algorithms, their specific applications and a critical evaluation of the obtained results are provided. The paper is based on the necessity of the improvements in energy use needed for drying related on the existing data. The overview of the ways for such achievements, and a general classification of machine learning algorithm are the background of the paper. The methods used are the machine learning techniques employed in different energy-related issues for drying processes. The paper focuses on the applications of artificial neural networks and other machine learning algorithms and models for different energy-related issues, including different energy types applications, challenges associated with energy consumption, and opportunities for energy reduction. Not only the applied algorithms, but also their specific applications, and the statistical analysis of the obtained results are also overviewed. Finally, a critical evaluation of the findings highlighting the potentials of machine learning algorithms in addressing energy-related challenges (such as estimation of energy consumption, opportunities for energy reduction, and use of different energy sources) is provided. The presented analysis underscored the effectiveness of machine learning applications for these purposes. [ABSTRACT FROM AUTHOR]

Significant amounts of data need to be transferred in order to optimize the operation of power grids. The development of advanced metering and control infrastructure ensures a growth in the amount of data transferred within smart grids. Data compression is a strategy to reduce the burden. This paper presents current challenges in the field of time-series data compression. This paper's novel contribution is the division of data in smart grids to real-time data used for control purposes and big data sets used for non-time-critical analysis of the system. Both of these two applications have different requirements for effective compression. Currently used algorithms are listed and described with their advantages and drawbacks for both of these applications. Details needed for the implementation of an algorithm were also provided. Comprehensive analysis and comparison are intended to facilitate the design of a data compression method tailored for a particular application. An important contribution is the description of the influence of data compression methods on cybersecurity, which is one of the major concerns in modern power grids. Future work includes the development of adaptive compression methods based on artificial intelligence, especially machine learning and quantum computing. This review will offer a solid foundation for the research and design of data compression methods. [ABSTRACT FROM AUTHOR]

Partial discharge (PD) is a common issue in power transformers that can lead to catastrophic failures if left undetected. Time reversal (TR) is a well-known technique in signal processing that can reconstruct signals by reversing the direction of time. The paper investigates the use of time reversal and the integration of time reversal with convolution neural networks (CNNs) for diagnosing PD in power transformers. We compare the performance of these techniques on a dataset of PD signals collected from power transformers. We propose a novel method of using time reversal as a pre-processing step to improve the accuracy of CNNs on noisy or distorted signals. Our experimental results demonstrate that this approach can significantly enhance the performance of CNNs on various datasets, including speech, audio, and image datasets. This paper provides a novel approach to signal processing and demonstrates the potential of time reversal as a pre-processing step in CNNs. [ABSTRACT FROM AUTHOR]