Search

This paper takes a low-energy building in Changchun, China, as an object to test and study the characteristics of two heating modes, AC/DC (Alternative current/Direct current) switching and AC/DC synthesis, from the perspectives of temperature change, irradiation intensity, power generation, electricity consumption, etc. Firstly, the experimental research was conducted under two heating cable modes by establishing mathematical models and a test rig, and it was found that the photoelectric conversion efficiency on sunny, cloudy, and overcast days was 18%, 14.5%, and 12%, respectively. A simulation model was established by TRNSYS to run an ultra-low-energy building throughout the year. It was found that the highest and lowest monthly power generation occurred in February and July, respectively. The annual power generation of the system was 6614 kWh, and the heating season power generation was 3293.42 kWh. In the current research, the DC electricity consumption was slightly higher than the AC electricity consumption. Under conditions of similar radiation intensity and power generation, the indoor temperature of the AC/DC synthesis cable heating mode were 1.38% higher than the AC/DC switching heating able mode, and the electricity consumption were 10.9% and 4.76% higher, respectively, than those of the AC switching heating cable mode. This is of great significance for clean-energy heating, energy savings, and emissions reduction in northern China. [ABSTRACT FROM AUTHOR]

Since the construction industry is one of China's high carbon emission industries, to achieve China's carbon neutrality target by 2060, CO2 emissions in cold regions must be reduced. At the same time, forests have excellent carbon sequestration abilities, so this paper takes residential buildings in severely cold regions as the object of carbon emission reduction research. A model of a two-story building in Changchun was constructed, and the life-cycle carbon emissions of reinforced concrete and wood structures were measured using the life-cycle evaluation method as the basis for calculation and simulation with DesignBuilderVer.7 software. The results show that the life-cycle carbon emission of a wood structure house is 61.46 t less than that of a reinforced concrete house, and the life-cycle carbon emission reduction rate of a wood structure house is 43.39%. Based on the data, it has been proven that wooden structures effectively reduce carbon dioxide emissions during the building life cycle while enhancing building performance, given the same structural conditions. [ABSTRACT FROM AUTHOR]