Search

10.3390/en13143519 15 Yang R., Yuan Y., Ying R., Shen B., Long T. A novel energy management strategy for a ship's hybrid solar energy generation system using a particle swarm optimization algorithm. Unfortunately, the paper does not take into account the fragility of the European Energy System with respect to the Energy suppliers. Moreover, the Energy Plant is strongly constrained by the primary energy providers and the energy distribution system must provide the difficult tasks related to implement dispatching and energy saving systems. 10.3390/en13040894 10 Nikolaou T., Stavrakakis G.S., Tsamoudalis K. Modeling and optimal dimensioning of a pumped hydro energy storage system for the exploitation of the rejected wind energy in the non-interconnected electrical power system of the Crete island, Greece. [Extracted from the article]

At present, most studies use the direct method to analyze the oscillation problem of modern power systems. However, these studies often only simplify the external characteristics of the wind turbine and lack an in-depth understanding of its internal refined energy structure. In this paper, based on the direct-drive permanent magnetic synchronous generator's detailed model (D-PMSG), combined with the dynamic energy of its port, layers of analysis are performed on the wind turbine's internal connections, and a detailed model of the energy structure is created. Then, the interaction mechanism of each control link in the wind turbine is analyzed by combining the energy function of the wind turbine with the improved perturbation method. Finally, this paper constructs a sub-synchronous oscillation (SSO) scenario of weak damping and a forcing type and proves the accuracy and effectiveness of the traceability method based on the refined energy of D-PMSG. This traceability method based on refined energy is expected to provide a new solution to the stability problem caused by the integration of new energy. [ABSTRACT FROM AUTHOR]

With a large proportion of wind farms connected to the power grid, it brings more pressure on the stable operation of power systems in shorter time scales. Efficient and accurate scheduling, operation control and decision making require high time resolution power forecasting algorithms with higher accuracy and real-time performance. In this paper, we innovatively propose a high temporal resolution wind power forecasting method based on a light convolutional architecture—DC_LCNN. The method starts from the source data and novelly designs the dual-channel data input mode to provide different combinations of feature data for the model, thus improving the upper limit of the learning ability of the whole model. The dual-channel convolutional neural network (CNN) structure extracts different spatial and temporal constraints of the input features. The light global maximum pooling method replaces the flat operation combined with the fully connected (FC) forecasting method in the traditional CNN, extracts the most significant features of the global method, and directly performs data downscaling at the same time, which significantly improves the forecasting accuracy and efficiency of the model. In this paper, the experiments are carried out on the 1 s resolution data of the actual wind field, and the single-step forecasting task with 1 s ahead of time and the multi-step forecasting task with 1~10 s ahead of time are executed, respectively. Comparing the experimental results with the classical deep learning models in the current field, the proposed model shows absolute accuracy advantages on both forecasting tasks. This also shows that the light architecture design based on simple deep learning models is also a good solution in performing high time resolution wind power forecasting tasks. [ABSTRACT FROM AUTHOR]

Deploying renewable generation to replace conventional fossil-fuel-based energy supplies provides an important pathway for the decarbonization of steelmaking plants. Meanwhile, it is also crucial to improve the flexibility of blast-furnace-gas-fired combined-cycle power plants (BFGCCs) to ease the accommodation of uncertain renewable generation. To this end, this paper proposes the deployment of a molten salt heat storage (MSHS) system in BFGCCs to store the heat of gas turbine flue gas so that the power–heat coupling of these BFGCCs can be unlocked to enhance the flexibility of the energy supply. A stochastic capacity optimization of an integrated BFGCC–MSHS–wind–solar (BMWS) energy system is presented to determine the optimal installed capacities of a BFG holder, MSHS, wind turbine, and PV panel, aiming to achieve an economic and safe energy supply for the entire system. Multiple scenarios considering uncertain fluctuations in load demands and renewable generation are generated with the Monte Carlo method based on a typical scenario. These scenarios are then reduced to representative scenarios using the synchronous substitution and reduction method for stochastic capacity optimization to enhance the reliability of the results. The case study results demonstrate that configuring MSHS reduces the total annualized cost of the BMWS system by 2.28%. Furthermore, considering the uncertainties of the power/heating load and wind/PV generation can reduce the expected annualized total cost of the BMWS system and the corresponding standard deviation by 5.66% and 81.45%, respectively. The BMWS system can achieve 730.68 tons of equivalent CO2 reduction in 24 h due to the successful utilization of renewable energy. This paper provides an effective approach for the decarbonization of energy generation systems in steelmaking plants. [ABSTRACT FROM AUTHOR]

Offshore wind farms are growing in complexity and size, expanding deeper into maritime environments to capture stronger and steadier wind energy. Like other domains in the energy sector, the wind energy domain is continuing to digitalize its systems by embracing Industry 4.0 technologies such as the Industrial Internet of Things (IIoT), virtualization, and edge computing to monitor and manage its critical infrastructure remotely. Adopting these technologies creates dynamic, scalable, and cost-effective data-acquisition systems. At the heart of these data-acquisition systems is a communication network that facilitates data transfer between communicating nodes. Given the challenges of configuring, managing, and troubleshooting large-scale communication networks, this review paper explores the adoption of the state-of-the-art software-defined networking (SDN) and network function virtualization (NFV) technologies in the design of next-generation offshore wind farm IIoT–Edge communication networks. While SDN and NFV technologies present a promising solution to address the challenges of these large-scale communication networks, this paper discusses the SDN/NFV-related performance, security, reliability, and scalability concerns, highlighting current mitigation strategies. Building on these mitigation strategies, the concept of resilience (that is, the ability to recover from component failures, attacks, and service interruptions) is given special attention. The paper highlights the self-X (self-configuring, self-healing, and self-optimizing) approaches that build resilience in the software-defined IIoT–Edge communication network architectures. These resilience approaches enable the network to autonomously adjust its configuration, self-repair during stochastic failures, and optimize performance in response to changing conditions. The paper concludes that resilient software-defined IIoT–Edge communication networks will play a big role in guaranteeing seamless next-generation offshore wind farm operations by facilitating critical, latency-sensitive data transfers. [ABSTRACT FROM AUTHOR]

The development and utilization of clean energy is becoming more extensive, and wind power generation is one of the key points of this. Occasionally, wind turbines are faced with various extreme environmental impacts such as icing, lightning strikes and so on. In particular, the icing of wind turbines increases icing–wind loads, and results in a reduced power output. And blades broken down lead to large-area shutdown accidents caused by high-speed rotating, which seriously affects the reliability and equipment safety of wind power generation. Relevant institutions and researchers at home and abroad have carried out a lot of research on this. This paper summarizes the formation and influencing factors of wind turbine icing, the influence of icing on wind power generation, and defense technologies. First, it introduces the formation conditions and mechanisms of icing in wind farm regions and the relationship between meteorological and climatic characteristics and icing, and analyzes the key influence factors on icing. Then, the impact of icing on wind turbines is explained from the aspects of mechanical operation, the power curve, jeopardies and economic benefits. And then the monitoring and safety status of wind turbines icing is analyzed, which involves collecting the relevant research on anti-de-icing in wind power generation, introducing various anti/de-icing technologies, and analyzing the principle of icing defense. Finally, this paper summarizes wind turbine icing and its defense technologies, and puts forward the future research direction based on the existing problems of wind power generation icing. [ABSTRACT FROM AUTHOR]

With the shortage of fossil energy and the increasingly serious environmental problems, renewable energy based on wind and solar power generation has been gradually developed. For the problem of wind power uncertainty and the low-carbon economic optimization problem of an integrated energy system with power to gas (P2G) and carbon capture and storage (CCS), this paper proposes an economic optimization scheduling strategy of an integrated energy system considering wind power uncertainty and P2G-CCS technology. Firstly, the mathematical model of the park integrated energy system with P2G-CCS technology is established. Secondly, to address the wind power uncertainty problem, Latin hypercube sampling (LHS) is used to generate a large number of wind power scenarios, and the fast antecedent elimination technique is used to reduce the scenarios. Then, to establish a mixed integer linear programming model, the branch and bound algorithm is employed to develop an economic optimal scheduling model with the lowest operating cost of the system as the optimization objective, taking into account the ladder-type carbon trading mechanism, and the sensitivity of the scale parameters of P2G-CCS construction is analyzed. Finally, the scheduling scheme is introduced into a typical industrial park model for simulation. The simulation result shows that the consideration of the wind uncertainty problem can further reduce the system's operating cost, and the introduction of P2G-CCS can effectively help the park's integrated energy system to reduce carbon emissions and solve the problem of wind and solar power consumption. Moreover, it can more effectively reduce the system's operating costs and improve the economic benefits of the park. [ABSTRACT FROM AUTHOR]

This paper investigates whether renewable energy influences economic growth and happiness. Using panel data from 25 European Union countries for the period 2012–2022, this study employs a panel model for estimation with fixed and random effects, and robust HAC standard errors. According to the research results, in general, the growing share of renewable energy in the energy mix has a positive impact on economic growth and the happiness of citizens. However, detailed research has shown that this effect depends on the type of energy; a significant positive impact was recorded only in solar share energy, wind share energy and economic growth. However, almost all types of renewable energy were included, i.e., biofuel, hydro, solar and other renewable share energy, and all had a significantly positive impact on the level of happiness. The exception was wind share energy, which showed a significant negative impact. The research findings of this paper provide empirical support for promoting renewable energy, which is positive both for economies and the happiness of citizens. It is one of the main aspects of sustainable economic growth. [ABSTRACT FROM AUTHOR]

The government has set an ambitious target of renewable energy development in Malaysia. As a promising renewable energy source, wind energy plays an important role in the Malaysia renewable energy roadmap. Compared to onshore wind energy, offshore wind resources with better quality can be provided in the areas away from the coast, which has greater potential to contribute to electricity generation. Wind and bathymetry conditions are two important factors that determine the feasibility and economics of offshore wind turbines. In this paper, an investigation is conducted on wind and bathymetry conditions around Malaysia. The data source mainly originates from the Global Wind Atlas. The conditions of the coastal areas in different states and federal territories of both Peninsular Malaysia and East Malaysia are analysed, with a specific focus on wind speed, wind energy density, and bathymetry conditions in high-wind-speed regions. The data and survey are verified and compared with the past published literature. This paper aims to investigate the wind and bathymetry conditions around Malaysia, assess the potential of offshore wind energy, discuss the feasibility of offshore wind turbines, and provide references for offshore wind development in Malaysia. [ABSTRACT FROM AUTHOR]

In a power system with a high proportion of renewable energy, sudden increases in wind power or photovoltaic output can lead to huge challenges, such as difficulties in accommodating excess renewable energy and imbalances between supply and demand on the grid. As an important adjustable resource on the demand side, air conditioning load is a flexible load for realizing output consumption. In this paper, a heterogeneous air conditioning load regulation strategy for renewable energy consumption is proposed. Each air conditioning load regulation quantity is obtained based on the day-ahead dispatching mode. Then, the temperature setting value, rated power, and duty cycle are selected as the indexes. The load regulation sequence is obtained by the entropy weight method. Finally, the load regulation time of each air conditioning load is obtained based on the constraint of the quantity of loads during the possible adjustment time. The simulation analysis shows that the temperature regulation strategy presented in this paper can effectively reduce the power fluctuations of air conditioning loads, while ensuring that users with lower temperature settings are selected in the adjustment process. [ABSTRACT FROM AUTHOR]

With the greatly increased penetration rate of wind power, photovoltaic, and other new energy sources in the power system, the proportion of controllable units gradually decreased, resulting in increased system uncertainty. The biogas power generation system can effectively alleviate the pressure caused by source-load uncertainty in such high-permeability systems of new energy sources such as wind power and photovoltaic. Hence, from the perspective of the power system, this paper introduces a capacity demand analysis method for a rural biogas power generation system capable of independent operation amidst source-load uncertainty. To enhance the depiction of pure load demand uncertainty, a scene set generation method is proposed, leveraging quantile regression analysis and Gaussian mixture model clustering. Each scene's data and probability of occurrence elucidate the uncertainty of pure load demand. An integrated optimal operation model for new energy and biogas-generating units, free from energy storage capacity constraints, is established based on the generated scenario set. Addressing considerations such as biogas utilization rate and system operation cost, a biogas storage correction model, utilizing the gas storage deviation degree index and the cost growth rate index, is developed to determine biogas demand and capacity. The example results demonstrate the significant reduction in gas storage construction costs and charging and discharging imbalances achieved by the proposed model while ensuring systemic operational cost effectiveness. [ABSTRACT FROM AUTHOR]

Recently, there has been a significant increase in the integration of distributed energy resources (DERs) such as small-scale photovoltaic systems and wind turbines in power distribution systems. When the aggregated outputs of DERs are combined, excessive reverse current may occur in distribution lines, leading to overvoltage issues and exceeding thermal limits of the distribution lines. To address these issues, it is necessary to limit the output of DERs to a certain level, which results in constraining the hosting capacity of DERs in the distribution system. In this paper, coordination control methodologies of DERs are developed and executed to mitigate the overvoltage and overcurrent induced by DERs, thereby increasing the hosting capacity for DERs of the distribution system. This paper proposes three coordinated approaches of active and reactive power control of DERs, namely Var Precedence, Watt Precedence, and Integrated Watt and Var Control. The Var and Watt Precedence prioritizes reactive power for voltage (Q–V) and active power for current (P–I) to address network congestion, thereby enhancing hosting capacity. Conversely, the Integrated Var and Watt Precedence propose a novel algorithm that combines four control indices (Q–V, P–V, Q–I, and P–I) to solve network problems while maximizing hosting capacity. The three proposed methods are based on the sensitivity analysis of voltage and current to the active and reactive power outputs at the DER installation locations on the distribution lines, aiming to minimize DER active power curtailment. Each sensitivity is derived from linearized power equations at the operating points of the distribution system. To minimize the computation burden of iterative computation, each proposed method decouples active and reactive power and proceeds with sequential control in its own unique way, iteratively determining the precise output control of distributed power sources to reduce linearization errors. The three proposed algorithms are verified via case studies, evaluating their performance compared to conventional approaches. The case studies exhibit superior control effectiveness of the proposed DER power control methods compared to conventional methods when issues such as overvoltage and overcurrent occur simultaneously in the distribution line so that the DER hosting capacity of the system can be improved. [ABSTRACT FROM AUTHOR]

There is limited research focused on achieving optimal torque control performance of Switched Reluctance Generators (SRGs). The majority of existing studies tend to favor voltage or power control strategies. However, a significant drawback of SRGs is their susceptibility to high torque ripple. In power generation systems, torque ripple implicates fluctuations in the generated power of the generator. Moreover, high torque ripple can lead to mechanical vibrations and noise in the powertrain, impacting the overall system performance. In this paper, a Torque Sharing Function (TSF) with Indirect Instantaneous Torque Control (IITC) for SRG applied to Wind Energy Conversion Systems (WECS) is proposed to minimize torque ripple. The proposed method adjusts the shared reference torque function between the phases based on instantaneous torque, rather than the existing TSF methods formulated with a mathematical expression. Additionally, this paper introduces an innovative speed control scheme for SRG drive using a Fuzzy Super-Twisting Sliding Mode Command (FSTSMC) method. Notably robust against parameter uncertainties and payload disturbances, the proposed scheme ensures finite-time convergence even in the presence of external disturbances, while effectively reducing chattering. To assess the effectiveness of the proposed methods, comprehensive comparisons are made with traditional control techniques, including Proportional–Integral (PI), Integral Sliding Mode Control (ISMC), and Super-Twisting Sliding Mode Control (STSMC). The simulation results, obtained using MATLAB®/SIMULINK® under various speeds and mechanical torque conditions, demonstrate the superior performance and robustness of the proposed approaches. This study presents a thorough experimental analysis of a 250 W four-phase 8/6 SRG. The generator was connected to a DC resistive load, and the analysis focuses on assessing its performance and operational characteristics across different rotational speeds. The primary objective is to validate and confirm the efficacy of the SRG under varying conditions. [ABSTRACT FROM AUTHOR]

With the increasing penetration of renewable energy resources, their variable, intermittent and unpredictable characteristics bring new challenges to the power system. These challenges require micro-meteorological data and techniques to provide more support for the power systems, including planning, dispatching, operation, and so on. This paper aims to provide readers with insights into the effects of micro-meteorology on power systems, as well as the actual improvement brought by micro-meteorology in some power system scenarios. This paper provides a review including the relevant micro-meteorological techniques such as observation, assimilation and numerical techniques, as well as artificial intelligence, presenting a relatively complete overview of the most recent and relevant micro-meteorology-related literature associated with power systems. The impact of micro-meteorology on power systems is analyzed in six different forms of power generation and three typical scenarios of different stages in the power system, as well as integrated energy systems and disaster prevention and reduction. Finally, a case study in China is provided. This case takes wind power prediction as an example in a power system to compare the performance when applying micro-meteorological data or not. The experimental results demonstrated that using the micro-meteorological reanalysis dataset with high spatial--temporal resolution for wind power prediction performed better, verifying the improvement of micro-meteorology to the power system to some extent. [ABSTRACT FROM AUTHOR]

Offshore wind energy is considered as one of the most promising resources of clean and renewable energy to replace fossil fuels. Additionally, its cost is expected to be lower than onshore wind energy as the technology matures. Offshore wind turbines (OWTs) normally operate in harsh ocean environments, which could impact their structural integrity. Scour erosion around foundations of OWTs can substantially change the overall stiffness of these structures and shorten their lifetime. Currently, there are a limited number of studies on countermeasures and their engineering requirements for decreasing the scouring effect; this is due to their different hydraulic circumstances, such as their stability, reliability, and resistance capacity. To this end, advancements in scour protection measures in the offshore energy sector are evaluated in this paper through a thorough and critical review following the PRISMA systematic literature mapping approach. This includes 68 papers on scour protection and over 30 scour protection designs for various types of wind turbine foundations. Here, we aim to provide an overview of the latest scouring protection measures and their comprehensive assessment, as well as their prospects and future challenges. The findings of this study will provide key insights into scour protection measures for OWTs and will subsequently contribute to the future growth of the offshore renewable energy sector. [ABSTRACT FROM AUTHOR]

Reduction or elimination of reliance on traditional fossil fuels and of the emission of greenhouse gases and pollutants into the environment are affecting energy technologies, systems, and applications. In this context, one potential approach to achieving sustainability, decarbonization, and ensuring the energy and economic viability of existing and future energy systems involves adopting one or more renewable sources. The presented paper concentrates on examining the performance of a small-scale hybrid renewable polygeneration system. This system utilizes biogas produced through anaerobic digestion, which is then supplied to an internal combustion engine, along with solar energy converted into electrical energy by photovoltaic modules and wind energy harnessed through a wind turbine. A small-scale user, represented by residential buildings and a zootechnical farm with heating, cooling, and electrical energy demands, serves as the case study. TRNSYS software is employed to design and model the system, considering realistic assumptions about technical aspects and user energy requirements. The investigation involves analyzing the system's operation, considering both energy and economic perspectives. The paper discusses the pros and cons of combining biogas, solar, and wind energy in the proposed hybrid system under the considered case study. Despite non-satisfactory economic profitability without incentives, the proposed system allows one to save significant amounts of primary energy and carbon dioxide equivalent emissions. [ABSTRACT FROM AUTHOR]

This paper aims to investigate the development of a floating artificial sustainable energy island at a conceptual design level that would enhance the energy independence of islands focusing on a case study on the island of Crete. This paper provides a baseline assessment showing the immense potential of wind and solar energy in and around Crete integrating the third significant renewable energy source (RES) of ocean waves into the energy island. The selection of the best location for the floating offshore platforms that compose the energy island is addressed through exploiting the great potential of the above-mentioned RES, taking into consideration criteria with regard to several significant human activities. To this end, the concept of an innovative floating modular energy island (FMEI) that integrates different renewable energy resources is proposed; in addition, a case study that focuses on the energy independency of a big island illustrates the concept referring to the substitution of the local thermal power plants that are currently in operation in Crete with sustainable energy power. Although focused on the renewable energy resources around Crete, the work of this paper provides a basis for a systematic offshore renewable energy assessment as it proposes a new methodology that could be used anywhere around the globe. [ABSTRACT FROM AUTHOR]

As the penetration of renewable energy sources into a power system increases, the significance of precise short-term forecasts for wind power generation becomes paramount. However, the erratic and non-periodic nature of wind poses challenges in accurately predicting the output. This paper presents a comprehensive investigation into forecasting wind power generation for the following day, using three machine learning models: long short-term memory (LSTM), convolutional neural network-bidirectional LSTM (CNN-biLSTM), and light gradient boosting machine (LGBM). In addition, this paper proposes a method to improve the prediction performance of LGBM by separating data according to the distribution of features, and training and testing each separated dataset with a distinct model. This study includes a comparative analysis of the performance of the proposed models in predicting wind turbine output, offering valuable insights into their respective efficiencies. The results of this investigation were analyzed for two geographically distinct wind farms (Korea and the UK). The findings of this study are expected to facilitate the selection of efficient prediction models within the forecast accuracy auxiliary service market and assist grid operators in ensuring reliable power supply for the grid. [ABSTRACT FROM AUTHOR]

Wind power systems participating in primary frequency regulation have become a novel trend. In order to solve the problem of the over-speed deloading (OSD) control of wind power systems failing to provide reserved capacity for primary frequency regulation while under turbulent winds, this paper analyzes the influence mechanism of turbulence characteristics on the OSD control and the relationship between the reserve capacity of OSD control and the deloading power coefficient under turbulent wind speeds, while also quantifying the relationship between the turbulence characteristic index and deloading power coefficient. The range of the deloading power coefficient is obtained accordingly, based on which improved OSD control is proposed to dynamically optimize the deloading power coefficient according to the turbulence characteristics, which improves the frequency regulation performance of wind power systems under turbulent wind speed. According to the simulations and experimental results, the improved method proposed in this paper has good effectiveness and superiority in frequency regulation effect and rotor speed performance. [ABSTRACT FROM AUTHOR]

Hydrogen is a versatile feedstock for various chemical and industrial processes, as well as an energy carrier. Dedicated hydrogen infrastructure is envisioned to conceptualize in hydrogen valleys, which link together the suppliers and consumers of hydrogen, heat, oxygen, and electricity. One potential hydrogen valley is the Bay of Bothnia, located in the northern part of the Baltic Sea between Finland and Sweden. The region is characterized as having excellent wind power potential, a strong forest cluster with numerous pulp and paper mills, and significant iron ore and steel production. The study investigates the hydrogen-related opportunities in the region, focusing on infrastructural requirements, flexibility, and co-operation of different sectors. The study found that local wind power capacity is rapidly increasing and will eventually enable the decarbonization of the steel sector in the area, along with moderate Power-to-X implementation. In such case, the heat obtained as a by-product from the electrolysis of hydrogen would greatly exceed the combined district heat demand of the major cities in the area. To completely fulfil its district heat demand, the city of Oulu was simulated to require 0.5–1.2 GW of electrolyser capacity, supported by heat pumps and optionally with heat storages. [ABSTRACT FROM AUTHOR]

As the penetration rate of wind power systems is rising, which causes the overall system's inertia to decline, the power system's capacity to regulate frequency will be negatively affected. Therefore, this paper investigates the inertia control of doubly fed induction generation, and an energy storage system is installed in the wind farm to respond to the frequency deviation. First, a fuzzy control-based virtual inertia adaptive control strategy is presented. The goal of dynamic adjustment of the virtual inertia coefficient is realized by taking into account the uncertain factors of wind speed and frequency change rate. A recovery strategy based on the energy storage system's level of charge is employed to prevent overcharging and over-discharging of the battery. Then, a weight factor based on frequency deviation is introduced to combine the droop output of the energy storage system with the virtual inertia output of the doubly fed induction generation, and the joint output mode of the wind storage system is determined in each stage of primary frequency regulation. Finally, the simulation verification is performed using the wind storage system simulation model created by MATLAB. The comparison results with other control methods prove that the proposed method is effective. [ABSTRACT FROM AUTHOR]

High-precision spatial-temporal wind power prediction technology is of great significance for ensuring the safe and stable operation of power grids. The development of artificial intelligence technology provides a new scheme for modeling with strong spatial-temporal correlation. In addition, the existing prediction models are mostly 'black box' models, lacking interpretability, which may lead to a lack of trust in the model by power grid dispatchers. Therefore, improving the model to obtain interpretability has become an important challenge. In this paper, an interpretable short-term wind power prediction model based on ensemble deep graph neural network is designed. Firstly, the graph network model (GNN) with an attention mechanism is applied to the aggregate and the spatial-temporal features of wind power data are extracted, and the interpretable ability is obtained. Then, the long short-term memory (LSTM) method is used to process the extracted features and establish a wind power prediction model. Finally, the random sampling algorithm is used to optimize the hyperparameters to improve the learning rate and performance of the model. Through multiple comparative experiments and a case analysis, the results show that the proposed model has a higher prediction accuracy than other traditional models and obtains reasonable interpretability in time and space dimensions. [ABSTRACT FROM AUTHOR]

With the continuous development of large-scale wind and photovoltaic power worldwide, the net load fluctuation of systems is increasing, thereby imposing higher demands for power supply assurance and new energy consumption capacity within emerging power systems. It is imperative to establish a quantifiable and efficient model for planning new power systems, to propose an analytical approach for determining optimal evolutionary paths, and to advance research on flexible resource planning across wide areas. In this paper, based on the simplified operating characteristics of multi-type flexible resources, a source-grid-load-storage collaborative planning and evolution analysis framework is established. Secondly, the lowest total cost of the whole life cycle of the system is taken as the optimization goal, the multiple flexible resource investment decisions and production operation constraints of various flexible resources on all sides of the system are considered, and the source-grid-load-storage planning model is established. Then, through the investment decision-making strategy setting of the system in different planning level years, the evolutionary path analysis method of the whole life cycle economy and weighted environmental protection benefit of the system is given. Finally, by taking the sending-end power grid in Gansu Province as an example, a case study is carried out. Calculations of new energy, key channels within the province, energy storage capacity, and load-side response capacity requirements for 2025, 2030, and 2060 are optimized. Based on the above analysis, the optimal evolution path of the power grid is proposed. When considering the weighted benefits of economy and environmental protection, the greater the weight of environmental protection benefits, the greater the possibility of choosing a radical scheme. The model and method proposed in this paper can provide technical reference for the future development planning and evolution analysis of new power systems. [ABSTRACT FROM AUTHOR]

Short-term wind power forecasting has difficult problems due to the very large variety of speeds of the wind, which is a key factor in producing energy. From the point of view of the whole country, an important problem is predicting the total impact of wind power's contribution to the country's energy demands for succeeding days. Accordingly, efficient planning of classical power sources may be made for the next day. This paper will investigate this direction of research. Based on historical data, a few neural network predictors will be combined into an ensemble that is responsible for the next day's wind power generation. The problem is difficult since wind farms are distributed in large regions of the country, where different wind conditions exist. Moreover, the information on wind speed is not available. This paper proposes and compares different structures of an ensemble combined from three neural networks. The best accuracy has been obtained with the application of an MLP combiner. The results of numerical experiments have shown a significant reduction in prediction errors compared to the naïve approach. The improvement in results with this naïve solution is close to two in the one-day-ahead prediction task. [ABSTRACT FROM AUTHOR]

Aiming to mitigate the impact of power fluctuation caused by large-scale renewable energy integration, coupled with a high rate of wind and solar power abandonment, the multi-objective optimal dispatching of a cascade hydro–wind–solar–thermal hybrid generation system with pumped storage hydropower (PSH) is proposed in this paper. Based on the proposed system, the scheduling operation strategy takes into account the complex restrictions of cascade hydropower as well as the flexibility of the PSH. According to various scenarios, the NSGA-II approach is adopted to address the optimization problem, minimizing the system's residual load variation and operation cost. The Pareto solution sets are contrasted and evaluated, applying the TOPSIS with CRITIC weighting. Additionally, the scheduling output of thermal power, cascade hydropower, and PSH is given in terms of different scenarios. The results demonstrate that the allocation of PSH to a hybrid energy system can significantly reduce the operation cost and the fluctuation in the residual load. [ABSTRACT FROM AUTHOR]

The ageing of coal-fired power stations in South Africa has led to regular power outages. Therefore, the country will need to urgently increase its electricity capacity to meet further energy demand from growing urbanization and population growth. This challenge has increased interest in alternative energy sources, such as renewable energy (RE). South Africa is gradually implementing appropriate renewable energy practices, reducing carbon emissions, cleansing the air, and assuring a more sustainable future. This paper summarizes the availability, current state, and future potential of renewable energy choices in South Africa. This paper also evaluates specific policy measures and government actions aimed at eliminating barriers and increasing renewable energy deployment in the future. It also considers the South African network's specialized techno-economic analysis. The findings show that South Africa is still heavily reliant on coal, with 78% of the current installed capacity coming from coal power in 2022, compared to 9.3% for solar and wind energy. [ABSTRACT FROM AUTHOR]

To face the growing electricity demand, several countries have adopted the solution of clean energy and use renewable energy sources (e.g., wind and solar) to reinforce the stability of the power network, especially during peak demand periods. Forecasting wind power generation is one of the important tasks for the network regulator. This paper deals with the probabilistic forecasting of hourly wind speed time series. In this approach, instead of evaluating a single-point forecast, an intraday interval prediction is provided, which allows modeling the probability distribution of the wind speed process at any specific hour. Practically, the quantification of uncertainty might be of particular interest for risk management purposes associated with wind power generation. The definition of interval prediction is based on the notion of conditional quantiles. In this paper, we introduce a new statistical approach, which deals with the nonstationarity behavior of the wind speed process, to define the conditional quantile predictor. The proposed approach was applied and evaluated on hourly wind speed processes. The suggested methodology provides accurate single-point forecasts using the conditional median as the predictor. Furthermore, the obtained hourly interval predictions are small and well adapted to the shape of the daily wind speed curves, which confirms the efficiency of the proposed approach. [ABSTRACT FROM AUTHOR]

In recent years, renewable energy has received extensive attention due to its advantages of sustainability, economy, and environmental protection. However, with the rapid development of renewable energy, the problem of curtailment is becoming increasingly serious. Studying the calculation method and establishing a quantitative evaluation system of renewable energy accommodation capacity are important means to solve this problem. This paper comprehensively considers the factors affecting the accommodation of renewable energy, establishes a accommodation calculation model with the maximum accommodation of renewable energy as the optimization target based on the time series production simulation method, and uses the hybrid particle swarm optimization (PSO) algorithm to solve it. The model is verified with historical data such as load, photovoltaic (PV), and wind power in a certain region throughout the year. The experimental results verify the rationality of the renewable-energy accommodation-capacity model proposed in this paper and the correctness of the theoretical analysis. The calculation results have important reference and guiding significance for the operation and control of power-grid planning and dispatching. [ABSTRACT FROM AUTHOR]

With the increase in the number of distributed energy resources (DERs) and electric vehicles (EVs), it is particularly important to solve the problem of EV charging station siting and capacity determination under the distribution network considering a large proportion of DERs. This paper proposes a bi-level planning model for EV charging stations that takes into account the characteristics of the spatial–temporal distribution of charging loads under an uncertain environment. First, the Origin–Destination (OD) matrix analysis method and the real-time Dijkstra dynamic path search algorithm are introduced and combined with the Larin Hypercube Sampling (LHS) method to establish the EV charging load prediction model considering the spatial and temporal distribution characteristics. Second, the upper objective function with the objective of minimizing the cost of EV charging station planning and user charging behavior is constructed, while the lower objective function with the objective of minimizing the cost of distribution network operation and carbon emission cost considering the uncertainty of wind power and photovoltaics is constructed. The constraints of the lower-layer objective function are transformed into the upper-layer objective function through Karush–Kuhn–Tucker (KKT) conditions, the optimal location and capacity of charging stations are finally determined, and the model of EV charging station siting and capacity determination is established. Finally, the validity of the model was verified by planning the coupled IEEE 33-node distribution network with the traffic road map of a city in southeastern South Dakota, USA. [ABSTRACT FROM AUTHOR]

The development of wind energy has been observed for many years. Both construction firms and the scientific world are analyzing new design solutions, atmospheric conditions and the technical performance achieved. The main goal of this research is to evaluate the requirements that have to be met to design wind power stations that would be an optimal fit for the climatic conditions in Poland. This study combines the results of empirical studies on wind velocity distributions with the physical fundamentals of wind power station design. This paper presents modelling of the relationships between wind velocity distributions observed in Poland and technical requirements for wind power stations design. The wind velocities distributions for various locations in Poland are determined and expressed in Weibull distribution parameters. Theoretical computations concerning the dependence of wind power stations as function of wind speed and air's physical properties are presented. Conclusions important for the design of power stations fitted to the atmospheric conditions in Poland are given. LabVIEW 2021 was used for computer modeling. [ABSTRACT FROM AUTHOR]

The massive grid integration of renewable energy necessitates frequent and rapid response of hydropower output, which has brought enormous challenges to the hydropower operation and new opportunities for hydropower development. To investigate feasible solutions for complementary systems to cope with the energy transition in the context of the constantly changing role of the hydropower plant and the rapid evolution of wind and solar power, the short-term coordinated scheduling model is developed for the wind–solar–hydro hybrid pumped storage (WSHPS) system with peak shaving operation. The effects of different reservoir inflow conditions, different wind and solar power forecast output, and installed capacity of pumping station on the performance of WSHPS system are analyzed. The results show that compared with the wind–solar–hydro hybrid (WSH) system, the total power generation of the WSHPS system in the dry, normal, and wet year increased by 10.69%, 11.40%, and 11.27% respectively. The solar curtailment decreased by 68.97%, 61.61%, and 48.43%, respectively, and the wind curtailment decreased by 76.14%, 58.48%, and 50.91%, respectively. The high proportion of wind and solar energy connected to the grid in summer leads to large net load fluctuations and serious energy curtailment. The increase in the installed capacity of the pumping station will promote the consumption of wind and solar energy in the WSHPS system. The model proposed in this paper can improve the operational flexibility of hydropower station and promote the consumption of wind and solar energy, which provides a reference for the research of cascade hydropower energy storage system. [ABSTRACT FROM AUTHOR]

While it is well known that the Weibull distribution is a good model for wind-speed measurements and can be explained through simple statistical arguments, how such a model holds for shorter time periods is still an open question. In this paper, we present a systematic investigation of the accuracy of the Weibull distribution to wind-speed measurements, in comparison with other possible "cousin" distributions. In particular, we show that the Gaussian distribution enables one to predict wind-speed histograms with higher accuracy than the Weibull distribution. Two other good candidates are the Nakagami and the Rice distributions, which can be interpreted as particular cases of the Weibull distribution for particular choices of the shape and scale parameters. These findings hold not only when predicting next-point values of the wind speed but also when predicting the wind energy values. Finally, we discuss such findings in the context of wind power forecasting and monitoring for power-grid assessment. [ABSTRACT FROM AUTHOR]

Offshore wind power has attracted significant attention due to its high potential, capability for large-scale farms, and high capacity factor. However, it faces high investment costs and issues with subsea power transmission. Conventional high-voltage AC (HVAC) methods are limited by charging current, while high-voltage DC (HVDC) methods suffer from the high cost of power conversion stations. The low-frequency AC (LFAC) method mitigates the charging current through low-frequency operation and can reduce power conversion station costs. This paper aims to identify the economically optimal frequency by comparing the investment costs of LFAC systems at various frequencies. The components of LFAC, including transformers, offshore platforms, and cables, exhibit frequency-dependent characteristics. Lower frequencies result in an increased size and volume of transformers, leading to higher investment costs for offshore platforms. In contrast, cable charging currents and losses are proportional to frequency, causing the total cost to reach a minimum at a specific frequency. To determine the optimal frequency, simulations of investment costs for varying capacities and distances were conducted. [ABSTRACT FROM AUTHOR]

Over the past few decades, many universities have turned to using microgrid systems because of their dependability, security, flexibility, and less reliance on the primary grid. Microgrids on campuses face challenges in the instability of power production due to meteorological conditions, as the output of renewable sources such as solar and wind power relies entirely on the weather and determining the optimal size of microgrids. Therefore, this paper comprehensively reviews the university campuses' microgrids. Some renewable energy sources, such as geothermal (GE), wind turbine (WT), and photovoltaic (PV), are compared in terms of installation costs, availability, weather conditions, efficiency, environmental impact, and maintenance. Furthermore, a description of microgrid systems and their components, including distributed generation (DG), energy storage system (ESS), and microgrid load, is presented. As a result, the most common optimization models for analyzing the performance of campus microgrids are discussed. Hybrid microgrid system configurations are introduced and compared to find the optimal configuration in terms of energy production and flexibility. Therefore, configuration A (Hybrid PV- grid-connected) is the most common configuration compared to the others due to its simplicity and free-charge operation. [ABSTRACT FROM AUTHOR]

Integrating wind power plants into the electricity grid poses challenges due to the intermittent nature of wind energy generation. Energy storage systems (ESSs) have shown promise in mitigating the intermittent variability associated with wind power. This paper presents a distributionally robust optimization (DRO) model for sizing energy storage systems to dispatch wind power plants. The variable wind power is formulated as a moment-based ambiguity set. Dispatchability is described by the expected value of the insufficient power of wind power relative to the dispatch command, which is a sum of nonlinear functions and is taken as the optimal index. A deterministic semi-definite positive model is derived to solve the problem effectively. Numerical studies are conducted to demonstrate the effectiveness and advantages of the proposed method. [ABSTRACT FROM AUTHOR]

The stability of offshore floating wind turbine foundation platforms is a fundamental requirement for the efficiency and safety of wind power generation systems. This paper proposes a novel small-diameter float-type semi-submersible platform to improve system stability. To evaluate the superior motion stability of the proposed floating platform, a comprehensive frequency–domain response analysis and experimental study were conducted in comparison with the OC4-DeepCwind platform developed by the National Renewable Energy Laboratory (NREL). The respective comparison of the frequency–domain response analysis and the experimental results demonstrated that the proposed floating wind turbine platform shows better hydrodynamic characteristics and resonance avoidance capability. This not only reduces the Response Amplitude Operators (RAOs), but also enhances the system stability, namely, effectively avoiding the regions of concentrated wave loading and low-frequency ranges. Furthermore, the proposed small-diameter semi-submersible platform has the potential to reduce manufacturing costs, providing valuable insights for the manufacturing of offshore floating wind turbine systems. [ABSTRACT FROM AUTHOR]

Paper [[3]] focused on mapping the wind potential of the southern coastal areas of Bangladesh to estimate the wind energy potential, along with the reduction in carbon emissions due to wind energy. Thirdly, an optimal dispatching model of IEHS with multiple functional areas considering heat network flow regulation is established to minimize the operation cost of IEHS with multiple functional areas while considering the penalty cost of RES abandonment and the time-of-use electricity price. With its reliable scientific and time-tested wind energy estimation method, this research is very important for the development of wind energy in the southern coastal areas of Bangladesh to meet the increasing energy demands through initiating the development of renewable energy to improve the energy security and reduce the carbon emissions of the country. The authors first summarize the system structure and provide a typical system structure, which includes an energy generation system, an energy distribution system, an energy storage system and energy end users. [Extracted from the article]

At present, in the situation that wind power penetration is increasing year by year, the use of a hybrid energy storage system (HESS) to smooth out wind power fluctuations becomes an effective method. However, the existing control strategy has the problem of inadequate utilization of fluctuating power. In this paper, we propose a control strategy for smoothing wind power fluctuations based on double Kalman filters with adaptive adjustment of the state of charge (SOC). Firstly, considering the wind power's active power grid constraint, the parameters of the dual Kalman filter are adaptively adjusted according to the original output power to obtain the target grid power synchronously, and the total smoothing command of the energy storage system is determined with the goal of improving the SOC of the lithium battery. On this basis, the SOC of the supercapacitor is considered to be improved, and the adaptive low-pass filter is used for the secondary distribution of the energy storage power command to achieve fine-grained management of the output power of HESS. The final simulation results show that the obtained smoothed wind power satisfies the 1 min and 10 min fluctuation criteria, and the minimum capacity required for lithium batteries is reduced by 0.07 MW·h under the same initial conditions as in the proposed method in this paper; it can use the fluctuating power when the SOC crosses the limit, and has a regulating effect on the SOC of HESS to improve the wind power smoothing ability and realize the stable grid-connection requirement of wind power. [ABSTRACT FROM AUTHOR]

In an electricity and heat integrated energy system, the transmission of thermal energy encounters significant delays, and the delays are often not integer multiples of the dispatch interval. This mismatch poses challenges for achieving coordinated dispatch with the electric power system. To address this problem, the fictitious node method is proposed in this paper, offering a novel approach to calculating the quasi-dynamic characteristics of the heating network. Furthermore, to enhance the local consumption capacity of wind power, the heat storage capacity of the heat supply network was taken into consideration in this study, and a combined energy supply model equipped with electric boilers, incorporating combined heat and power (CHP) units and gas turbine units, was developed. This model effectively expands the operational range of CHP units and enables the decoupling of electricity and heat operations in gas turbine units. The analysis conducted demonstrated the effectiveness of the proposed method and model in achieving the coordinated dispatch of electricity and heat. Moreover, it highlighted the positive impact on the overall economy of system operation and the promotion of wind power consumption. The optimal configuration presented in this paper resulted in an 8.2% improvement in system operating economics and a 38.3% enhancement in wind power integration. [ABSTRACT FROM AUTHOR]

To solve the problems of low utilization of biomass and uncertainty and intermittency of wind power (WP) in rural winter, an interval optimization model of a rural integrated energy system with biogas fermentation and electrolytic hydrogen production is constructed in this paper. Firstly, a biogas fermentation kinetic model and a biogas hydrogen blending model are developed. Secondly, the interval number is used to describe the uncertainty of WP, and an interval optimization scheduling model is developed to minimize daily operating cost. Finally, a rural integrated energy system in Northeast China is taken as an example, and a sensitivity analysis of electricity price, gas production, and biomass price is conducted. The simulation results show that the proposed strategy can significantly reduce the wind abandonment rate and improve the economy by 3.8–22.3% compared with conventional energy storage under optimal dispatch. [ABSTRACT FROM AUTHOR]

Obtaining wind energy for the production of electric energy plays a key role in overcoming the problems associated with climate change and the dwindling reserves of traditional types of energy resources. The purpose of this work is to analyze current methods of energy estimation and forecasting, to consider the main classifications of forecasts and methods used in their construction and to review the main types of mathematical distributions used to calculate the speed and power of wind flow, depending on specific geographical conditions. In recent years, there has been an increase in the capacity of modern wind generators, which has significantly improved the efficiency of wind energy parks. The initial stage in determining the feasibility of involving a particular energy source in the overall energy system of the region is a preliminary assessment of the energy potential, allowing one to determine the possible percentage of substitution of traditional energy. To solve such a problem, it is necessary to use models of energy supply. Evaluation of wind as a resource creates certain difficulties in modeling because this resource is stochastic and variable. In this regard, this paper proposes to consider various models for estimating wind energy potential, which can be classified into empirical models and models based on the application of modern intelligent data analysis technologies. The paper presents an analysis of the existing models for estimating the amount of energy, which can be used in a system designed to determine the most optimal configuration of the energy system based on the use of different conversion technologies most relevant to the case under study, and it also serves as the basis for creating digital twins designed to model and optimize the operation of the projected energy complex. [ABSTRACT FROM AUTHOR]

Since hybrid power plants (HPPs) play an intensive role in the energy supply balance of future energy systems, there is today increased attention on co-located wind–battery HPPs both in industry and academia. This paper proposes an energy management system (EMS) methodology for wind–battery plants participating in two sequential electricity markets, namely in the spot market (SM) and the balancing market (BM). The proposed and implemented EMS consists of day-ahead (DA) spot market optimization, hour-ahead (HA) balancing market optimization, and intra-hour re-dispatch optimization to allow HPPs to achieve energy arbitrage, to offer regulation power at the HA stage, and to reduce real-time imbalances. The optimization models used in the EMS incorporate an accurate battery degradation model and grid connection constraints. This paper presents a detailed case analysis of the profitability of HPPs in markets towards 2030 based on the proposed EMS. Furthermore, the value of intra-hour re-dispatch optimization in improving the feasibility of generation plans, as well as the impacts of overplanting on wind energy curtailment and battery degradation, is also investigated based on the proposed EMS. [ABSTRACT FROM AUTHOR]

Power generation forecasts for wind farms, especially with a short-term horizon, have been extensively researched due to the growing share of wind farms in total power generation. Detailed forecasts are necessary for the optimization of power systems of various sizes. This review and analytical paper is largely focused on a statistical analysis of forecasting errors based on more than one hundred papers on wind generation forecasts. Factors affecting the magnitude of forecasting errors are presented and discussed. Normalized root mean squared error (nRMSE) and normalized mean absolute error (nMAE) have been selected as the main error metrics considered here. A new and unique error dispersion factor (EDF) is proposed, being the ratio of nRMSE to nMAE. The variability of EDF depending on selected factors (size of wind farm, forecasting horizons, and class of forecasting method) has been examined. This is unique and original research, a novelty in studies on errors of power generation forecasts in wind farms. In addition, extensive quantitative and qualitative analyses have been conducted to assess the magnitude of forecasting error depending on selected factors (such as forecasting horizon, wind farm size, and a class of the forecasting method). Based on these analyses and a review of more than one hundred papers, a unique set of recommendations on the preferred content of papers addressing wind farm generation forecasts has been developed. These recommendations would make it possible to conduct very precise benchmarking meta-analyses of forecasting studies described in research papers and to develop valuable general conclusions concerning the analyzed phenomena. [ABSTRACT FROM AUTHOR]

The renewable-dominant hybrid generation systems (HGSs) are increasingly important to the electric power system worldwide. However, influenced by uncertain meteorological factors, the operational robustness of HGSs must be evaluated to inform the associated decision-making. Additionally, the main factors affecting the HGS's robustness should be urgently identified under deep uncertainties, as this provides valuable guidance for HGS capacity configuration. In this paper, a multivariate stochastic simulation method is developed and used to generate uncertain resource scenarios of runoff, photovoltaic power, and wind power. Subsequently, a long-term stochastic optimization model of the HGS is employed to derive the optimal operating rules. Finally, these operating rules are used to simulate the long-term operation of an HGS, and the results are used to evaluate the HGS's robustness and identify its main sensitivities. A clean energy base located in the Upper Yellow River Basin, China, is selected as a case study. The results show that the HGS achieves greater operational robustness than an individual hydropower system, and the robustness becomes weaker as the total capacity of photovoltaic and wind power increases. Additionally, the operational robustness of the HGS is found to be more sensitive to the total capacity than to the capacity ratio between photovoltaic and wind power. [ABSTRACT FROM AUTHOR]

Large-scale fluctuating and intermittent new energy power generation in a new power system is gradually connected to the grid. In view of the impact of the uncertainty of wind power on the spinning reserve capacity of thermal power units in the new power system's day-ahead dispatching and reserve auxiliary service market, the original dispatching mode and intensity can no longer meet the system demand. To address this problem, the establishment of a wind power grid-connected new power system's standby auxiliary service market reward and punishment assessment mechanism is undertaken to fundamentally reduce the demand for auxiliary services of the new power system pressure. In the first part of this paper, a two-stage optimal scheduling strategy is proposed for the first day of the year that takes into account the operational risk and standby economics. First, a data-driven method is used to generate the forecast value of the wind power interval before the day, and a unit start–stop optimization model (the first-stage optimization model) is established by taking into account the CvaR (conditional value at risk) theory to optimize the risk loss of wind abandonment and loss of load and the fuel cost of each unit, and an optimization algorithm is used to carry out the three scenarios and the corresponding four scenarios to optimize the configuration of the start–stop state and power output of each unit. The optimization algorithm is used to optimize the starting and stopping status and output of each unit for three circumstances and four corresponding scenarios. Then, in the second stage, a standby auxiliary service market incentive and penalty assessment model is established to effectively coordinate the sharing of rotating standby capacity and cost among thermal power units through the incentive and penalty mechanism so as to make a reasonable and efficient allocation of wind power output, curtailable load, and synchronized standby capacity. The new power system with improved IEEE30 nodes is simulated and verified, and it is found that the two-stage optimization model obtains a scheduling strategy that takes into account the system operating cost, standby economy, and reliability, and at the same time, through the standby auxiliary service market incentive and penalty assessment mechanism, the extra cost caused by standby cost mismatch can be avoided. This evaluation model provides a reference for the safe, efficient, flexible, and nimble operation of the new power system, improves the economic efficiency and improves the auxiliary service market mechanism. [ABSTRACT FROM AUTHOR]

Utilizing renewable energy (RE) sources can provide a realistic answer to the problem of many nations' energy needs. This paper reviews the current status of using RE to produce electricity in the Kingdom of Saudi Arabia (KSA). The primary aim of the review is to identify and analyze the solar- and wind-energy utilization, problems, and future trends in KSA while taking into account all relevant aspects, associated development hurdles, and suggested solutions. All involved parties will receive useful results and conclusions from a thorough examination and analysis of the pertinent literature that can assist them in understanding the potential of solar and wind energy, considering all the linked issues. [ABSTRACT FROM AUTHOR]

With the large-scale use of wind turbines, the ability of the power system to resist frequency fluctuations has been greatly weakened, making the contradiction between frequency regulation supply and demand in the power system increasingly prominent. In order to ensure the frequency security of the power system, this paper conducts research on the primary frequency regulation (PR) backup configuration problem of a power system containing a high proportion of wind power. First, according to the dynamic properties of the speed regulator, a system frequency response model considering the limiting link is established. And the system frequency response model is transformed into a time-domain analytical function of PR reserve capacity and frequency maximum value. On this basis, a PR backup configuration model of a power system containing a high proportion of wind power is constructed with the optimization goal of minimizing system operating costs and taking into account the limiting link constraints. It is proposed to use the L-shape algorithm to decompose the model into main problems and sub-problems, which effectively reduces the solution complexity of the model. Finally, the correctness and effectiveness of this model are verified based on the improved IEEE 39-bus system. [ABSTRACT FROM AUTHOR]

This paper investigates the dynamic patterns in the small-signal behavior of power systems with wind power generation. The interactions between synchronous generators and wind generators are investigated. In addition, the impact of increased wind generation penetration on the damping and frequency of the synchronous generator's electromechanical oscillations is addressed. Wind generators of three different technologies are considered throughout this study. Very detailed dynamic models of wind generators are used and detailed. [ABSTRACT FROM AUTHOR]

To meet future load projection with the integration of renewable sources, the transmission system must be planned optimally. Thus, this paper introduces a comparative analysis and comprehensive methodology for transmission expansion planning (TEP), incorporating the combined effects of wind power, losses, N-1 contingency, a FACTS, and storage in a flexible environment. Specifically, the optimal placement of the FACTS, known as series capacitive compensation (SCC) devices, is used. The intraday constraints associated with wind power and energy storage are represented by the methodology of typical days jointly with the load scenarios light, heavy, and medium. The TEP problem is formulated as a mixed-integer nonlinear programming (MINLP) problem through a DC model and is solved using a specialized genetic algorithm. This algorithm is also used to determine the optimal placement of SCC devices and storage systems in expansion planning. The proposed methodology is then used to perform a comparison of the effect of the different technologies on the robustness and cost of the final solution of the TEP problem. Three test systems were used to perform the comparative analyses, namely the Garver system, the IEEE-24 system, and a real-world Colombian power system of 93 buses. The results indicate that energy storage and SCC devices lead to a decrease in transmission requirements and overall investment, enabling the effective integration of wind farms. [ABSTRACT FROM AUTHOR]

This paper presents a novel approach to estimating short-term production of wind farms, which are made up of numerous turbine generators. It harnesses the power of big data through a blend of data-driven and model-based methods. Specifically, it combines an Artificial Neural Network (ANN) for immediate future predictions of wind turbine power output with a stochastic model for dependability, using Hybrid Reliability Block Diagrams. A thorough state-of-the-art review has been conducted in order to demonstrate the applicability of an ANN for non-linear stochastic problems of energy or power forecast estimation. The study leverages an innovative cluster analysis to group wind turbines and reduce the computational effort of the ANN, with a dependability model that improves the accuracy of the data-driven output estimation. Therefore, the main novelty is the employment of a hybrid model that combines an ANN with a dependability stochastic model that accounts for the realistic operational scenarios of wind turbines, including their susceptibility to random shutdowns This approach marks a significant advancement in the field, introducing a methodology which can aid the design and the power production forecast. The research has been applied to a case study of a 24 MW wind farm located in the south of Italy, characterized by 28 turbines. The findings demonstrate that the integrated model significantly enhances short-term wind-energy production estimation, achieving a 480% improvement in accuracy over the solo-clustering approach. [ABSTRACT FROM AUTHOR]