Search

The development and utilization of clean energy is becoming more extensive, and wind power generation is one of the key points of this. Occasionally, wind turbines are faced with various extreme environmental impacts such as icing, lightning strikes and so on. In particular, the icing of wind turbines increases icing–wind loads, and results in a reduced power output. And blades broken down lead to large-area shutdown accidents caused by high-speed rotating, which seriously affects the reliability and equipment safety of wind power generation. Relevant institutions and researchers at home and abroad have carried out a lot of research on this. This paper summarizes the formation and influencing factors of wind turbine icing, the influence of icing on wind power generation, and defense technologies. First, it introduces the formation conditions and mechanisms of icing in wind farm regions and the relationship between meteorological and climatic characteristics and icing, and analyzes the key influence factors on icing. Then, the impact of icing on wind turbines is explained from the aspects of mechanical operation, the power curve, jeopardies and economic benefits. And then the monitoring and safety status of wind turbines icing is analyzed, which involves collecting the relevant research on anti-de-icing in wind power generation, introducing various anti/de-icing technologies, and analyzing the principle of icing defense. Finally, this paper summarizes wind turbine icing and its defense technologies, and puts forward the future research direction based on the existing problems of wind power generation icing. [ABSTRACT FROM AUTHOR]

At present, most studies use the direct method to analyze the oscillation problem of modern power systems. However, these studies often only simplify the external characteristics of the wind turbine and lack an in-depth understanding of its internal refined energy structure. In this paper, based on the direct-drive permanent magnetic synchronous generator's detailed model (D-PMSG), combined with the dynamic energy of its port, layers of analysis are performed on the wind turbine's internal connections, and a detailed model of the energy structure is created. Then, the interaction mechanism of each control link in the wind turbine is analyzed by combining the energy function of the wind turbine with the improved perturbation method. Finally, this paper constructs a sub-synchronous oscillation (SSO) scenario of weak damping and a forcing type and proves the accuracy and effectiveness of the traceability method based on the refined energy of D-PMSG. This traceability method based on refined energy is expected to provide a new solution to the stability problem caused by the integration of new energy. [ABSTRACT FROM AUTHOR]

Offshore wind energy is considered as one of the most promising resources of clean and renewable energy to replace fossil fuels. Additionally, its cost is expected to be lower than onshore wind energy as the technology matures. Offshore wind turbines (OWTs) normally operate in harsh ocean environments, which could impact their structural integrity. Scour erosion around foundations of OWTs can substantially change the overall stiffness of these structures and shorten their lifetime. Currently, there are a limited number of studies on countermeasures and their engineering requirements for decreasing the scouring effect; this is due to their different hydraulic circumstances, such as their stability, reliability, and resistance capacity. To this end, advancements in scour protection measures in the offshore energy sector are evaluated in this paper through a thorough and critical review following the PRISMA systematic literature mapping approach. This includes 68 papers on scour protection and over 30 scour protection designs for various types of wind turbine foundations. Here, we aim to provide an overview of the latest scouring protection measures and their comprehensive assessment, as well as their prospects and future challenges. The findings of this study will provide key insights into scour protection measures for OWTs and will subsequently contribute to the future growth of the offshore renewable energy sector. [ABSTRACT FROM AUTHOR]

To face the growing electricity demand, several countries have adopted the solution of clean energy and use renewable energy sources (e.g., wind and solar) to reinforce the stability of the power network, especially during peak demand periods. Forecasting wind power generation is one of the important tasks for the network regulator. This paper deals with the probabilistic forecasting of hourly wind speed time series. In this approach, instead of evaluating a single-point forecast, an intraday interval prediction is provided, which allows modeling the probability distribution of the wind speed process at any specific hour. Practically, the quantification of uncertainty might be of particular interest for risk management purposes associated with wind power generation. The definition of interval prediction is based on the notion of conditional quantiles. In this paper, we introduce a new statistical approach, which deals with the nonstationarity behavior of the wind speed process, to define the conditional quantile predictor. The proposed approach was applied and evaluated on hourly wind speed processes. The suggested methodology provides accurate single-point forecasts using the conditional median as the predictor. Furthermore, the obtained hourly interval predictions are small and well adapted to the shape of the daily wind speed curves, which confirms the efficiency of the proposed approach. [ABSTRACT FROM AUTHOR]

As the penetration of renewable energy sources into a power system increases, the significance of precise short-term forecasts for wind power generation becomes paramount. However, the erratic and non-periodic nature of wind poses challenges in accurately predicting the output. This paper presents a comprehensive investigation into forecasting wind power generation for the following day, using three machine learning models: long short-term memory (LSTM), convolutional neural network-bidirectional LSTM (CNN-biLSTM), and light gradient boosting machine (LGBM). In addition, this paper proposes a method to improve the prediction performance of LGBM by separating data according to the distribution of features, and training and testing each separated dataset with a distinct model. This study includes a comparative analysis of the performance of the proposed models in predicting wind turbine output, offering valuable insights into their respective efficiencies. The results of this investigation were analyzed for two geographically distinct wind farms (Korea and the UK). The findings of this study are expected to facilitate the selection of efficient prediction models within the forecast accuracy auxiliary service market and assist grid operators in ensuring reliable power supply for the grid. [ABSTRACT FROM AUTHOR]

The stability of offshore floating wind turbine foundation platforms is a fundamental requirement for the efficiency and safety of wind power generation systems. This paper proposes a novel small-diameter float-type semi-submersible platform to improve system stability. To evaluate the superior motion stability of the proposed floating platform, a comprehensive frequency–domain response analysis and experimental study were conducted in comparison with the OC4-DeepCwind platform developed by the National Renewable Energy Laboratory (NREL). The respective comparison of the frequency–domain response analysis and the experimental results demonstrated that the proposed floating wind turbine platform shows better hydrodynamic characteristics and resonance avoidance capability. This not only reduces the Response Amplitude Operators (RAOs), but also enhances the system stability, namely, effectively avoiding the regions of concentrated wave loading and low-frequency ranges. Furthermore, the proposed small-diameter semi-submersible platform has the potential to reduce manufacturing costs, providing valuable insights for the manufacturing of offshore floating wind turbine systems. [ABSTRACT FROM AUTHOR]

This paper publishes the experimental performance results of a novel small dual−stage wind turbine at different speeds under wind tunnel testing. The results confirm its superiority at low wind speeds <7 m/s, which is consistent with natural wind conditions in most countries around the world. At lower wind speeds, the efficiency of the small, dual−stage wind turbine is higher than that of a conventional single−stage turbine. At wind speeds of <6 m/s, the novel dual−stage wind turbine always produces approximately 2.5 times more power than a single−stage wind turbine; the power coefficient is greater than 0.4. Thanks to this feature, the novel small, dual−stage wind turbine is effective in practical applications. For windy areas in Vietnam, the power generated over the same amount of time by the novel dual−stage wind turbine can be more than double that of a single−stage turbine. Next, a standard CFD model is established and validated with the above experimental measurements. This method ensures the objectivity and authenticity of the computational model. This standard CFD model is applicable to a horizontal double−stage wind turbine with any configuration and blade profile. The URANS simulation method, which uses sliding meshes and the k−omega SST turbulence model, was implemented with rotational domains of the minimum thicknesses of rotational domains (in this paper, 0.09Rfront and 0.06Rrear, accordingly). This method predicts higher mechanical work for the turbine than the actual value by an interval of <10% in the same speed range as in the experiment. This is an acceptable deviation. [ABSTRACT FROM AUTHOR]

With the large-scale use of wind turbines, the ability of the power system to resist frequency fluctuations has been greatly weakened, making the contradiction between frequency regulation supply and demand in the power system increasingly prominent. In order to ensure the frequency security of the power system, this paper conducts research on the primary frequency regulation (PR) backup configuration problem of a power system containing a high proportion of wind power. First, according to the dynamic properties of the speed regulator, a system frequency response model considering the limiting link is established. And the system frequency response model is transformed into a time-domain analytical function of PR reserve capacity and frequency maximum value. On this basis, a PR backup configuration model of a power system containing a high proportion of wind power is constructed with the optimization goal of minimizing system operating costs and taking into account the limiting link constraints. It is proposed to use the L-shape algorithm to decompose the model into main problems and sub-problems, which effectively reduces the solution complexity of the model. Finally, the correctness and effectiveness of this model are verified based on the improved IEEE 39-bus system. [ABSTRACT FROM AUTHOR]

This paper presents a novel approach to estimating short-term production of wind farms, which are made up of numerous turbine generators. It harnesses the power of big data through a blend of data-driven and model-based methods. Specifically, it combines an Artificial Neural Network (ANN) for immediate future predictions of wind turbine power output with a stochastic model for dependability, using Hybrid Reliability Block Diagrams. A thorough state-of-the-art review has been conducted in order to demonstrate the applicability of an ANN for non-linear stochastic problems of energy or power forecast estimation. The study leverages an innovative cluster analysis to group wind turbines and reduce the computational effort of the ANN, with a dependability model that improves the accuracy of the data-driven output estimation. Therefore, the main novelty is the employment of a hybrid model that combines an ANN with a dependability stochastic model that accounts for the realistic operational scenarios of wind turbines, including their susceptibility to random shutdowns This approach marks a significant advancement in the field, introducing a methodology which can aid the design and the power production forecast. The research has been applied to a case study of a 24 MW wind farm located in the south of Italy, characterized by 28 turbines. The findings demonstrate that the integrated model significantly enhances short-term wind-energy production estimation, achieving a 480% improvement in accuracy over the solo-clustering approach. [ABSTRACT FROM AUTHOR]

With the continuous warming of the global climate, expanding the use of renewable energy has become one of the main social responsibilities. However, as the number of installed wind turbines and their physical dimensions continue to increase, the issue of generated noise has become increasingly significant in influencing the acceptance and endorsement of wind power projects by neighboring communities. In this paper, we investigated the noise generated by two wind turbine units with rated powers of 1.5 MW and 4.5 MW and analyzed the variations in low-frequency noise during their operation and shutdown periods. This research shows that the power of a single unit has a significant impact on the low-frequency noise emitted into the environment. Compared with 1.5 MW wind turbines, 4.5 MW wind turbines generate more low-frequency noise when operating at the same wind speed. Further analysis of the narrowband frequency spectra and one-third octave spectra of the measured noise indicates that the low-frequency noise from the 4.5 MW wind turbine increases significantly in the range of approximately 80 Hz to 300 Hz, with more pronounced variations below 250 Hz corresponding to changes in wind speed. However, the overall variations in low-frequency noise with wind speed are not as notable as those observed for the 1.5 MW wind turbine. Due to the relatively weak attenuation of low-frequency noise in the atmosphere, the higher low-frequency content of large wind turbines may cause more distress to residents near wind farms. The result of this study emphasizes that in the planning and design of wind power projects, in addition to considering the efficiency of single-unit power generation and the contribution of renewable energy, it is also necessary to pay full attention to noise emission issues to ensure that the project is widely supported and accepted in the community. [ABSTRACT FROM AUTHOR]

Scouring around the fixed foundations of offshore wind turbines (OWTs) remains a pressing concern within the offshore wind industry, significantly jeopardizing OWT safety. Despite previous efforts, the current understanding of this phenomenon remains incomplete, as various factors related to offshore wind farms and OWT operations can exert intricate influences. To further explore this matter, this paper undertakes a new study to further understand the interplay between monopile vibrations, tidal currents, and sea waves, elucidating their combined impact on scour surrounding an OWT's foundation. It was found that, besides pile vibration amplitude and frequency, the pile vibration direction can also notably influence the scour around the monopile. Specifically, the most pronounced scour mostly transpires when the monopile undergoes vibrations along the 135° direction relative to the inflow direction. The mildest scour mostly occurs when the pile vibrates along the 90° direction. Additionally, this study reveals that different types of waves, indicated by the ratio of water depth, H, to wavelength, L, also engender varying scour around the monopile. The influence of waves on scour increases with the decrease in the H/L ratio, implying that OWT foundations are more threatened by shallow water waves than by deep water waves. [ABSTRACT FROM AUTHOR]

Offshore wind farms are great options for addressing the world's energy and climate change challenges, as well as meeting rising energy demand while taking environmental and economic impacts into account. Floating wind turbines, in specific, depict the next horizon in the sustainable renewable energy industry. In this study, a life-cycle cost analysis for floating offshore wind turbines is developed by combining the most recent data and parametric formulas from databases and relevant papers. The cost analysis models focused on cost minimization with special emphasis on Operation and Maintenance Cost (OPEX), Decommissioning Cost (DECOM), and Levelized Cost of Energy (LCOE), which are important factors in wind power economy. Given that floating wind energy is still developing, the presented scenarios should be beneficial in making future decisions. The cost analysis scenarios include on-site and off-site maintenance scenarios for OPEX. In addition, four alternative scenarios for DECOM have been examined: mechanical recycling, mechanical-incineration, incineration processes, and landfill. According to the findings of these scenarios, OPEX varies from 16.89 to 19.93 £/MWh and DECOM between 3.47 and 3.65 £/MWh, whilst the total LCOE varied from 50.67 to 66.73 £/MWh. [ABSTRACT FROM AUTHOR]

To enhance the economic viability of wind energy in cold regions and ensure the safe operational management of wind farms, this paper proposes a short-term wind turbine blade icing wind power prediction method that combines principal component analysis (PCA) and fractional Lévy stable motion (fLsm). By applying supervisory control and data acquisition (SCADA) data from wind turbines experiencing icing in a mountainous area of Yunnan Province, China, the model comprehensively considers long-range dependence (LRD) and self-similar features. Adopting a combined pattern of previous-day predictions and actual measurement data, the model predicts the power under near-icing conditions, thereby enhancing the credibility and accuracy of icing forecasts. After validation and comparison with other prediction models (fBm, CNN-Attention-GRU, XGBoost), the model demonstrates a remarkable advantage in accuracy, achieving an accuracy rate and F1 score of 96.86% and 97.13%, respectively. This study proves the feasibility and wide applicability of the proposed model, providing robust data support for reducing wind turbine efficiency losses and minimizing operational risks. [ABSTRACT FROM AUTHOR]

As grid-connected wind farms become more common in the modern power system, the question of how to maximize wind power generation while limiting downtime has been a common issue for researchers around the world. Due to the complexity of wind turbine systems and the difficulty to predict varying wind speeds, artificial intelligence (AI) and machine learning (ML) algorithms have become key components when developing controllers and control schemes. Although, in recent years, several review papers on these topics have been published, there are no comprehensive review papers that pertain to both AI and ML in wind turbine control systems available in the literature, especially with respect to the most recently published control techniques. To overcome the drawbacks of the existing literature, an in-depth overview of ML and AI in wind turbine systems is presented in this paper. This paper analyzes the following reviews: (i) why optimizing wind farm power generation is important; (ii) the challenges associated with designing an efficient control scheme for wind farms; (iii) a breakdown of the different types of AI and ML algorithms used in wind farm controllers and control schemes; (iv) AI and ML for wind speed prediction; (v) AI and ML for wind power prediction; (vi) AI and ML for mechanical component monitoring and fault detection; and (vii) AI and ML for electrical fault prevention and detection. This paper will offer researchers and engineers in the wind energy generation field a comprehensive review of the application of AI and ML in the control methodology of offshore and onshore wind farms so that more efficient and robust control schemes can be designed for future wind turbine controllers. [ABSTRACT FROM AUTHOR]

The share of wind energy in the energy mix is continuously increasing. However, a very important issue associated with its generation is the high failure rate of wind turbines. This situation particularly concerns large wind turbines, which are expensive and have a lower tolerance for system damage caused by various failures and faults. Vulnerable components include sensors, electronic control units, electrical systems, hydraulic systems, generators, gearboxes, rotor blades, and so on. As a result, significant emphasis is placed on improving the reliability, availability, and productivity of wind turbines. It is extremely important to detect and identify abnormalities as early as possible and predict potential failures and damages and the remaining useful life of components. One way to ensure turbine efficiency is to plan and implement preventive repairs. This work shows a semi-Markov model of a preventive maintenance system based on Enercon E82-2 wind turbines. The system's performance quality is evaluated based on profit over time and an asymptotic availability coefficient. The developed model establishes formulas describing the efficiency functions and formulates the conditions for the existence of extremes (maxima) of these functions. Computational examples provided at the end of the paper illustrate the obtained research results. A preventive maintenance model is developed that can be applied to wind turbine hazard prevention (determining optimal times for wind turbine preventive maintenance). [ABSTRACT FROM AUTHOR]

Faults in wind turbine rotating components contribute significantly to malfunctions and downtime. A prevalent strategy to reduce the Cost of Energy (CoE) in wind energy production focuses on minimizing maintenance expenses associated with these turbine components. An accurate Remaining Useful Life (RUL) diagnosis of these components is crucial for maintenance planning, ensuring uninterrupted energy quality and cost-efficiency. This paper introduces a refined method for RUL prediction of wind turbine rotating components using a Health Index (HI) derived from vibration signals. Performing HI construction by extracting all features from the vibration signal and selecting the best features to build HIs using on Principal Component Analysis (PCA) and some abnormal areas that deviate from the bearing damage trend can be eliminated. After constructing a HI use the similarity model and degradation models to predict RUL. Research results show that this degradation method can provide a reliable means to predict the RUL of wind turbine rotating components based on vibration signals. More importantly, predicting RUL in this way can significantly reduce operating and maintenance costs by providing wind turbine rotating operators with sufficient advance notice to plan repairs or replacements before any component failure occurs. [ABSTRACT FROM AUTHOR]

This study introduces a data augmentation technique based on generative adversarial networks (GANs) to improve the accuracy of day-ahead wind power predictions. To address the peculiarities of abrupt weather data, we propose a novel method for detecting mutation rates (MR) and local mutation rates (LMR). By analyzing historical data, we curated datasets that met specific mutation rate criteria. These transformed wind speed datasets were used as training instances, and using GAN-based methodologies, we generated a series of augmented training sets. The enriched dataset was then used to train the wind power prediction model, and the resulting prediction results were meticulously evaluated. Our empirical findings clearly demonstrate a significant improvement in the accuracy of day-ahead wind power prediction due to the proposed data augmentation approach. A comparative analysis with traditional methods showed an approximate 5% increase in monthly average prediction accuracy. This highlights the potential of leveraging mutated wind speed data and GAN-based techniques for data augmentation, leading to improved accuracy and reliability in wind power predictions. In conclusion, this paper presents a robust data augmentation method for wind power prediction, contributing to the potential enhancement of day-ahead prediction accuracy. Future research could explore additional mutation rate detection methods and strategies to further enhance GAN models, thereby amplifying the effectiveness of wind power prediction. [ABSTRACT FROM AUTHOR]

Wind energy research plays a vital role in the possibility of the success story of wind energy as one of the most promising sustainable energy sources. This continuous process has been achieved from the era of small wind turbines to the current Multi-WM standard and beyond. In this editorial paper, the progress and future outlook of wind energy research in two main aspects are discussed. The first aspect is in the area of wind turbine design and computations which covers engineering modeling and high-fidelity approaches. The second part of the paper discusses the usage of data-driven approaches in wind energy research. The paper compiles and presents the key findings of several recent studies in these two areas of research. The discussion of the paper is focused on the technical aspects of wind energy modeling. The main aim is to provide an overview about the direction of current research and its importance to meet future expectations. [ABSTRACT FROM AUTHOR]

Predicting the output power of wind generators is essential to improve grid flexibility, which is vulnerable to power supply variability and uncertainty. Digital twins can help predict the output of a wind turbine using a variety of environmental data generated by real-world systems. This paper dealt with the development of a physics-based output prediction model (P-bOPM) for a 10 MW floating offshore wind turbine (FOWT) for a digital twin. The wind power generator dealt with in this paper was modeled considering the NREL 5 MW standard wind turbine with a semi-submersible structure. A P-bOPM of a 10 MW FOWT for a digital twin was designed and simulated using ANSYS Twin Builder. By connecting the P-bOPM developed for the digital twin implementation with an external sensor through TCP/IP communication, it was possible to calculate the output of the wind turbine using real-time field data. As a result of evaluating the P-bOPM for various marine environments, it showed good accuracy. The digital twin equipped with the P-bOPM, which accurately reflects the variability of the offshore wind farm and can predict the output in real time, will be a great help in improving the flexibility of the power system in the future. [ABSTRACT FROM AUTHOR]

Direct-drive generators are an attractive candidate for wind power application since they do not need a gearbox, thus increasing operational reliability and reducing power losses. However, this is achieved at the cost of an increased generator size, larger inverter and decreased thermal performance. The associated cooling system is therefore crucial to keep the generator and inverter sizes down and to operate within the safe thermal limits. Various cooling techniques suitable for generators are therefore reviewed and analyzed in this paper. The performance and maintenance requirements are unavoidable compromises that need to be investigated together, especially for large generators. The location of the wind turbine is also important and dictates critical issues such as accessibility and maximum size. The key novelty in this paper is the assessment of the cooling methods based on generator size, reliability and maintenance requirements. [ABSTRACT FROM AUTHOR]

This paper investigates the prospect of permanent magnet vernier machine (PMVM) technology for wind power applications. Two types of PMVMs are defined based on the winding arrangements and resultant gear ratio ranges. A comprehensive design study of the selected PMVM topologies is conducted at 1 and 3 MW power levels. The optimized candidate designs of the PMVMs are then evaluated and also compared against the equivalent permanent magnet synchronous machine (PMSM) in terms of performance, costs, size and mass. While the existing research publications mainly focused on the PMVM designs of ( G r = 5 ), this study reveals that the pole/slot combinations of PMVMs with ( G r ≤ 5 ) are more appealing as there is a good trade-off between a reasonable power factor and high power density in these designs. It shows, in this paper, that the PMVM is a promising alternative to common PMSM technology for utility-scale wind-turbine drive-train applications. [ABSTRACT FROM AUTHOR]

Based on the energy storage type of hydraulic wind turbines (HWTs) and in view of the unit frequency drop problem under high wind power proportion conditions, this paper proposes a method of primary frequency control under maximum power point tracking (MPPT). HWT power output is affected by wind speed randomness and volatility. In addition, traditional wind turbines do not have inertial adjustment ability, leading to a decrease in the frequency stability of the power system caused by the increase in wind power permeability. In the paper, a hydraulic energy storage system and synchronous generator are combined to carry out primary frequency modulation, and a mathematical model of the hydraulic energy storage system, the hydraulic main transmission system, and the generator active power regulation system after grid connection is established. By analyzing the load changing rules of power systems and frequency fluctuation caused by the power system load after the wind turbine is grid-connected, the variable parameter frequency modulation compensation control strategy of combined turbine-energy storage systems is established, and simulation verification under different load fluctuations is carried out, verifying the effectiveness of the frequency modulation control strategy, which achieves a good control effect for improving the frequency modulation ability of hydraulic wind turbines. [ABSTRACT FROM AUTHOR]

This paper provides three different research contributions applied to a Wind Turbine patented in 1606 by the inventor Jerónimo de Ayanz y Beaumont. The windmill under study is the Ayanz Wind Turbine with screw blades. The first contribution consists of an experimental characterization of the Ayanz Wind Turbine, incorporating the enclosure proposed at the patent and showing that the efficiency of the wind turbine is increased between 70% and 90% due to the enclosure being employed. As not many details about the shape of the screw blades are provided at the patent, in this article the nowadays well-studied and commercially available Archimedes Spiral Wind Turbine blade is utilized. It has been observed that by using an enclosure with a cylindrical shape, not only the efficiency of the wind turbine is increased, but the visual impact is reduced as seeing the blades rotating is avoided, which is a very important fact for many potential individual users of this wind turbine. In addition, it also enables the use of a protective mesh for birds, almost totally reducing the probability of bird deaths. The second contribution consists in a simple and low-cost Maximum Power Point Tracking (MPPT) strategy for the wind turbine, which only uses an AC three-phase impedance to capture the maximum energy from the wind, enabling to eliminate the DC-DC converter and microprocessor employed typically for this purpose. Due to this, the cost, complexity, failure rate, and power losses of the electronic power circuit are reduced which is very welcomed for small-scale wind turbines. Finally, the last contribution is a protection electronic circuit that fulfills several objectives: to brake the wind turbine under high winds and to disconnect and protect it when over-currents occur and when the voltage range of the batteries connected to the wind turbine is outside their safety range. [ABSTRACT FROM AUTHOR]

The utilization of wind energy has become increasingly popular in the United States and many European countries due to its abundant nature and optimized design. While existing wind turbines are predominantly large-scale and not suitable for standalone or distributed power production, Lubbock County in West Texas offers a diverse range of renewable energy options to meet its energy needs. The region relies heavily on utility-scale wind energy sources to supply power to the Texas Grid, replacing conventional fossil fuel-based systems. Currently, standalone solar PV systems are the preferred choice for renewable energy generation. However, West Texas possesses an ample supply of wind energy that can be harnessed to establish a microgrid and provide standalone power to rural communities. Distributed wind energy offers localized power generation, reducing transmission losses and grid strain, while conventional wind farms require long-distance transmission, leading to efficiency gains. By employing the latest technology and optimizing efficiency, even in low-scale generation, a 6-kilowatt permanent magnet alternator-based distributed wind turbine has been designed. This paper focuses on analyzing the techno-economic aspects of implementing this wind turbine in a real-world scenario, taking into account wind attributes, such as velocity and available power, at the specific location. [ABSTRACT FROM AUTHOR]

Rapid growth of the use of wind energy calls for a more careful representation of wind speed probability distribution, both for identification and estimation purposes. In particular, a key point of the above identification and estimation aspects is representing the extreme values of wind speed probability distributions, which are of great interest both for wind energy applications and structural tower reliability analysis. The paper reviews the most adopted probability distribution models and estimation methods. In particular, for reasons which are properly discussed, attention is focused on the evaluation of an opportune "safety index" related to extreme values of wind speeds or gusts. This topic has gained increasing attention in recent years in both wind energy generation assessment and also in risk and structural reliability and safety analysis. With regard to wind energy generation, there is great sensitivity in the relationship between wind speed extreme upper quantiles and the corresponding wind energy quantiles. Concerning the risk and reliability analysis of structures, extreme wind speed value characterization is useful for a proper understanding of the destructive wind forces that may affect structural tower reliability analysis and, consequently, the proper choice of the cut off wind speed value; therefore, the above two kinds of analyses are somewhat related to each other. The focus is on the applications of the Bayesian inference technique for estimating the above safety index due to its effectiveness and usefulness. [ABSTRACT FROM AUTHOR]

Small-scale wind turbines play an important role in distributed generation since customers can use their houses, farms, and business to produce electric energy. The development of the power electronics system that processes the electric energy from small-scale wind turbines is a concern due to cost, simplicity, efficiency, and performance trade-offs. This paper presents the results of applying a three-phase phase-modular single-ended primary-inductance converter rectifier to processing the energy of a small-scale wind turbine system. The rectifier was designed according to the specifications of a commercial small-scale wind turbine system and tested in an emulator workbench, providing experimental data on the operation of the rectifier in this application. The rectifier can process the energy of a non-sinusoidal three-phase system since the permanent magnet synchronous generator has trapezoidal waveforms. The results show that the rectifier has the advantages of (i) using the inductance of the generator as the input filter inductor of the rectifier, (ii) providing input currents with the same shape as the voltages and in phase without the use of a current control system, (iii) simplicity of control of the DC output voltage and PWM modulation, and (iv) phase-modular characteristics that allow operating with phase fault without any additional control techniques. Due to the operation in discontinuous conduction mode, low efficiency in high power and/or low input voltage specifications are disadvantages. [ABSTRACT FROM AUTHOR]

The pitch control system has a profound impact on the development of wind energy, and yet a delay or non-minimum phase can weaken its performance. Thus, there is a strong incentive to enhance pitch control technology in order to counteract the negative effects of unidentified delays and non-minimum phase characteristics. To reduce the complexity of the parameter-tuning process and improve the performance of the system, in this paper, we propose a novel control method for wind turbine pitch angle with time delays. Specifically, the proposed control method is state-space PIDD2, which is based on internal model control (IMC) and the open-loop system step response. Then, considering the tracking, disturbance rejection and measurement noise, the proposed controller is verified through simulations. The simulation results demonstrate that the state-space PIDD2 (SS-PIDD2) can provide a trade-off between robustness, time domain performance and measurement noise attenuation and effectively improve pitch control performance in contrast to series PID and PI control methods. [ABSTRACT FROM AUTHOR]

In recent years, the demand and requirement for renewable energy have significantly increased due to concerns regarding energy security and the climate crisis. This has led to a significant focus on wind power generation. As the deployment of wind turbines continues to rise, there is a growing need to assess their lifespan and improve their stability. Access to accurate load data is crucial for enhancing safety and conducting remaining life assessments of wind turbines. However, maintaining and ensuring the reliability of measurement systems for long-term load data accumulation, stability assessments, and residual life evaluations can be challenging. As a result, numerous studies have been conducted on load prediction for wind turbines. However, existing load prediction models based on 10 min statistical data cannot adequately capture the short-term load variations experienced by wind turbines. Therefore, it is essential to develop models capable of predicting load with a high temporal resolution to enhance reliability, especially with the increasing scale and development of floating wind turbines. In this paper, we developed prediction models with a 50 Hz resolution for the bending strain at the tower bottom of offshore wind turbines by combining SCADA data and acceleration data using machine learning techniques and analyzed the results. The load prediction models demonstrated high accuracy, with a mean absolute percentage error below 4%. [ABSTRACT FROM AUTHOR]

Wind power generation is one of the mainstream renewable energy resources. Voltage stability is as important as the frequency stability of a power system with a high penetration of wind power generation. The advantages of high-voltage direct current (HVDC) transmission systems become more significant with the increase of both installed capacity and transmission distance in offshore wind farms. Therefore, this study discusses various voltage control methods for wind turbines and HVDC transmission systems. First, various voltage control methods of a wind farm were introduced, and they include QV control and voltage droop control. The reactive power of a wind turbine varies with active power, while the active power from each wind turbine may be different owing to wake effects. Thus, QV and voltage droop control with varying gain values are also discussed in this paper. Next, the voltage control methods for an HVDC transmission system, such as power factor control, voltage control, and Vac-Q control, are also summarized and tested in this study. When a three-phase short circuit fault occurs or a sudden reactive power load increases, the system voltage would drop immediately. Thus, various voltage control methods for wind turbines or HVDC can make the system's transient response more stable. Therefore, this study implemented the simulation scenarios, including a three-phase short circuit fault at the point of common coupling (PCC) or a sudden increase of reactive power load, and adopted various voltage control methods, which aim to verify whether additional voltage control methods are effective to improve the performance of transient voltage. The voltage control method has been implemented in PSCAD/EMTDC, and the simulation results show that the QV control performs better than the droop control. In addition, when applying the voltage control technique during a three-phase fault, transient voltage nadir can be improved through either an HVDC transmission system or an AC transmission system. [ABSTRACT FROM AUTHOR]

Today, there are a variety of technologies for wind-generating systems, characterized by component complexity and control. Controllers are essential for the sustainability of the output voltage and the optimal speed of the generator. To overcome the problems, the system must use controllers that determine the controllers' ability relative to each other and ultimately the controller that behaves better. This paper investigates the simulation of a PMSG wind turbine with PI, PID, neutral-point-clamped (NPC) and fuzzy controllers to study performance at different wind speeds as input. The wind energy is converted by the wind turbine and given to the PMSG generator. The PMSG output power is transferred to the power network; in this case, we have modeled the power network with a three-phase load. In order to confirm the performance of the proposed method, a PMSG wind turbine is simulated using MATLAB R2017. The simulation results show that the controllers can adjust the DC link voltage, the active power produced by the wind system. [ABSTRACT FROM AUTHOR]

With the rapid increase in wind power, its strong randomness has brought great challenges to power system operation. Accurate and timely ultra-short-term wind power prediction is essential for the stable operation of power systems. In this paper, an LsAdam–LSTM model is proposed for ultra-short-term wind power prediction, which is obtained by accelerating the long short-term memory (LSTM) network using an improved Adam optimizer with loss shrinkage (LsAdam). For a specific network topology, training progress heavily depends on the learning rate. To make the training loss of LSTM shrink faster with standard Adam, we use the past training loss-changing information to finely tune the next learning rate. Therefore, we design a gain coefficient according to the loss change to adjust the global learning rate in every epoch. In this way, the loss change in the training process can be incorporated into the learning progress and a closed-loop adaptive learning rate tuning mechanism can be constructed. Drastic changes in network parameters will deteriorate learning progress and even make the model non-converging, so the gain coefficient is designed based on the arctangent function with self-limiting properties. Because the learning rate is iteratively tuned with past loss-changing information, the trained model will have better performance. The test results on a wind turbine show that the LsAdam–LSTM model can obtain higher prediction accuracy with much fewer training epochs compared with Adam–LSTM, and the prediction accuracy has significant improvements compared with BP and SVR models. [ABSTRACT FROM AUTHOR]

While large renewable power generation schemes, such as wind farms, are well monitored with a wealth of data provided through a SCADA system, the only information about the behaviour of small wind turbines is often only through the metered electricity production. Given the variability of electricity output in response to the local wind or radiation condition, it is difficult to ascertain whether particular electricity production in a metering period is the result of the system operating normally or if a fault is resulting in a sub-optimal production. This paper develops two alternative methods to determine a performance score based only on electricity production and proxy wind data obtained from the nearest available weather measurement. One method based on partitioning the data, consistent with a priori expectations of turbine performance, performs well in common wind conditions but struggles to reflect the effects of different wind directions. An alternative method based on Principal Component Analysis is less intuitive but shown to be able to incorporate wind direction. [ABSTRACT FROM AUTHOR]

Temporally and spatially resolved data on wind power generation are very useful for studying the technical and economic aspects of this variable renewable energy at local and regional levels. Due to the lack of disaggregated electricity data from onshore and offshore turbines in Germany, it is necessary to use numerical simulations to calculate the power generation for a given geographic area and time period. This study shows how such a simulation model, which uses freely available plant and weather data as input variables, can be developed with the help of basic atmospheric laws and specific power curves of wind turbines. The wind power model is then applied to ensembles of nearly 28,000 onshore and 1500 offshore turbines to simulate the wind power generation in Germany for the years 2019 and 2020. For both periods, the obtained and spatially aggregated time series are in good agreement with the measured feed-in patterns for the whole of Germany. Such disaggregated simulation results can be used to analyze the power generation at any spatial scale, as each turbine is simulated separately with its location and technical parameters. This paper also presents the daily resolved wind power generation and associated indicators at the federal state level. [ABSTRACT FROM AUTHOR]

The components of an operational wind turbine are continuously impacted by both static and dynamic loads. Regular inspections and maintenance are required to keep these components healthy. The main bearing of a wind turbine is one such component that experiences heavy loading forces during operation. These forces depend on various parameters such as wind speed, operating regime and control actions. When a wind turbine provides frequency containment reserve (FCR) to support the grid frequency, the forces acting upon the main bearing are also expected to exhibit more dynamic variations. These forces have a direct impact on the lifetime of the main bearing. With an increasing trend of wind turbines participating in the frequency ancillary services market, an analysis of these dynamic forces becomes necessary. To this end, this paper assesses the effect of FCR-based control on the main bearing lifetime of the wind turbine. Firstly, a control algorithm is implemented such that the output power of the wind turbine is regulated as a function of grid frequency and the amount of FCR. Simulations are performed for a range of FCR to study the changing behaviour of dynamical forces acting on the main bearing with respect to the amount of FCR provided. Then, based on the outputs from these simulations and using 2 years of LiDAR wind data, the lifetime of the main bearing of the wind turbine is calculated and compared for each of the cases. Finally, based on the results obtained from this study, the impact of FCR provision on the main bearing lifetime is quantified and recommendations are made, that could be taken into account in the operation strategy of a wind farm. [ABSTRACT FROM AUTHOR]

Offshore wind energy is a renewable energy source that is developing fast. It is considered to be the most promising energy source in the next decade. Besides, the expanding trend for this technology requires the consideration of diversified seabeds. In deep seabeds, floating offshore wind technology (FOWT) is needed. For this latter technology, such as for conventional WT, we need to consider aspects related to performance, aerodynamic force, and forces during operation. In this paper, a two-bladed downwind wind turbine model is utilized to conduct experiments. The collective pitch and cyclic pitch angle are adjusted using swashplated equipment. The fluid forces and moments acting on the rotor surface are measured by a six-component balancing system. By changing the pitch angle of the wind turbine blades, attempts are made to manage the fluid forces generated on the rotor surface. Under varied uniform wind velocities of 7, 8, 9, and 10 m/s, the effect of collective pitch control and cyclic pitch control on the power coefficient and thrust coefficient of FOWT is then discussed. Furthermore, at a wind speed of 10 m/s, both the power coefficient and loads are investigated as the pitch angle and yaw angle change. Experimental results indicate that the combined moment magnitude can be controlled by changing the pitch-angle amplitude. The power coefficient is adjusted by the cyclic pitch-angle controller when the pitch-angle phase changes. In addition, the thrust coefficient fluctuated when the pitch angle changed in the oblique inflow wind condition. [ABSTRACT FROM AUTHOR]

This paper presents a review of the power and torque coefficients of various wind generation systems, which involve the real characteristics of the wind turbine as a function of the generated power. The coefficients are described by mathematical functions that depend on the trip speed ratio and blade pitch angle of the wind turbines. These mathematical functions are based on polynomial, sinusoidal, and exponential equations. Once the mathematical functions have been described, an analysis of the grouped coefficients according to their function is performed with the purpose of considering the variations in the trip speed ratio for all the coefficients based on sinusoidal and exponential functions, and with the variations in the blade pitch angle. This analysis allows us to determine the different coefficients of power and torque used in wind generation systems, with the objective of developing algorithms for searching for the point of maximum power generated and for the active control of wind turbines with variations in the blade pitch angle. [ABSTRACT FROM AUTHOR]

This paper examines the potential for reducing the cost of energy for super-scale wind turbines through the use of a downwind configuration. Using nonlinear aeroelastic modeling, the responses of 10 MW upwind and downwind wind turbine blades are simulated and compared under shear wind conditions. The study evaluates the impact of both nonlinear and linear aeroelastic models on the dynamic response of different blade sizes, highlighting the need for a nonlinear approach. Results indicate that the linear model overestimates blade deformations (18.14%) and the nonlinear model is more accurate for predicting the aeroelastic response of ultra-long blades of 86.35 m. The study also finds that the downwind turbine blade experiences smaller flapwise moment (17.53%), and blade tip flapwise deformation (33.97%) than the upwind turbine blade, with increased load and deformation fluctuation as wind shear increases. [ABSTRACT FROM AUTHOR]

As large-scale wind turbines are connected to the grid, modeling studies of wind farms are essential to the power system dynamic research. Due to the large number of wind turbines in the wind farm, detailed modeling of each wind turbine leads to high model complexity and low simulation efficiency. An equivalent modeling method for the wind farm is needed to reduce the complexity. For wind farms with widely used doubly-fed induction generators (DFIGs), the existing equivalent studies mainly focus on such continuous control parts as electrical control. These methods are unsuitable for the low voltage ride through (LVRT) part which is discontinuous due to switching control. Based on particle swarm optimization (PSO) and density-based spatial clustering of applications (DBSCAN), this paper proposes an equivalent method for LVRT characteristics of wind farms. Firstly, the multi-turbine equivalent model of the wind farm is established. Each wind turbine in the model represents a cluster of wind turbines with similar voltage variation characteristics. A single equivalent transmission line connects all wind turbines to the power grid. By changing the terminal voltage threshold to enter LVRT, each equivalent turbine can be in different LVRT states. Secondly, an LVRT parameter optimization method based on PSO is used to obtain the dynamic parameters of the equivalent wind turbines. This method of parameter optimization is applicable to the equivalent of LVRT parameters. Thirdly, a clustering method based on DBSCAN is used to obtain suitable clusters of wind turbines. This clustering method can classify wind turbines with similar electrical distances into the same cluster. Finally, two examples are set up to verify the proposed method. [ABSTRACT FROM AUTHOR]

This paper discusses how the incorporation of high-resolution ground coverage dataset ESA WorldCover into a wind flow field and wake simulation calculation, as well as the use of the coupled wake model for wind farm output simulation, can improve the accuracy of wind resource assessment using engineering examples. In the actual case of grid-connected wind farms in central China, SCADA wind speed data is reconstructed to the free flow wind speed in front of the wind turbine impeller using the transfer function of the nacelle, and the wind farm is modeled using OpenWind software, simulating the wind speed at the height of each wind turbine hub and each wind turbine output. The results show that when other initial data are consistent, using ESA's high-precision land cover dataset WorldCover 10 m to make roughness lengths which improves the wind farm output simulation accuracy by 8.91%, showing that it is worth trying to apply WorldCover 10 m to the wind farm simulation design. At the same time, this case is used to compare and analyze the application of the Eddy-Viscosity wake model and the two coupled wake models based on the Eddy-Viscosity wake model. The results show that the coupled wake model will have higher accuracy than the Deep Array Eddy Viscosity wake model and it is 1.24% more accurate than the Eddy Viscosity wake model, and the ASM Eddy Viscosity wake model is 5.21% more accurate than the Eddy Viscosity wake model. [ABSTRACT FROM AUTHOR]

The large-scale integration of wind turbines (WTs) in renewable power generation induces power oscillations, leading to frequency aberration due to power unbalance. Hence, in this paper, a secondary frequency control strategy called load frequency control (LFC) for power systems with wind turbine participation is proposed. Specifically, a backpropagation (BP)-trained neural network-based PI control approach is adopted to optimize the conventional PI controller to achieve better adaptiveness. The proposed controller was developed to realize the timely adjustment of PI parameters during unforeseen changes in system operation, to ensure the mutual coordination among wind turbine control circuits. In the meantime, the improved particle swarm optimization (IPSO) algorithm is utilized to adjust the initial neuron weights of the neural network, which can effectively improve the convergence of optimization. The simulation results demonstrate that the proposed IPSO-BP-PI controller performed evidently better than the conventional PI controller in the case of random load disturbance, with a significant reduction to near 10 s in regulation time and a final stable error of less than 10 − 3 for load frequency. Additionally, compared with the conventional PI controller counterpart, the frequency adjustment rate of the IPSO-BP-PI controller is significantly improved. Furthermore, it achieves higher control accuracy and robustness, demonstrating better integration of wind energy into traditional power systems. [ABSTRACT FROM AUTHOR]

The marine environment in which offshore wind turbines are located is very complex and subjected to a variety of random loads that vary with time and space. As an important component of offshore wind power, the cable also bears the impact of the environment in which most of the turbines are located. Under the long-term action of mechanical stresses such as tension, torsion, and vibration, the cable insulation will crack due to stress fatigue leading to partial discharge, which seriously affects its electrical performance. The study of the mechanism of the change of electrical properties of cable insulation due to mechanical behavior is of great theoretical guidance to improve the reliable operation of cables. This paper first introduces the basic characteristics and operating conditions of torsion-resistant cables and submarine cables. Then the mechanical behavior of the cables is summarized, and the deterioration mechanism and deterioration effect of wind power cable insulation under the influence of multiple factors such as heat, oxygen, and mechanical stress are sorted out. Then, the basic principles of wind power cable operation condition monitoring methods and their characteristics are described. Finally, the relevant methods for the detection of hidden defects inside the insulation are summarized. [ABSTRACT FROM AUTHOR]

In the wind energy industry, the power curve represents the relationship between the "wind speed" at the hub height and the corresponding "active power" to be generated. It is the most versatile condition indicator and of vital importance in several key applications, such as wind turbine selection, capacity factor estimation, wind energy assessment and forecasting, and condition monitoring, among others. Ensuring an effective implementation of the aforementioned applications mostly requires a modeling technique that best approximates the normal properties of an optimal wind turbines operation in a particular wind farm. This challenge has drawn the attention of wind farm operators and researchers towards the "state of the art" in wind energy technology. This paper provides an exhaustive and updated review on power curve based applications, the most common anomaly and fault types including their root-causes, along with data preprocessing and correction schemes (i.e., filtering, clustering, isolation, and others), and modeling techniques (i.e., parametric and non-parametric) which cover a wide range of algorithms. More than 100 references, for the most part selected from recently published journal articles, were carefully compiled to properly assess the past, present, and future research directions in this active domain. [ABSTRACT FROM AUTHOR]

With the increase in the penetration rate of renewable energy sources, a machine-learning-based forecasting system has been introduced to the grid sector to improve the participation rate in the electricity market and reduce energy losses. In these studies, correlation analysis of mechanical and environmental variables, including geographical figures, is considered a crucial point to increase the prediction's accuracy. Various models have been applied in terms of accuracy, speed calculation, and amount of data based on a mathematical model that can calculate the wake; however, it can be difficult to derive variables such as air density, roughness length, and the effect of turbulence on the structural characteristics of wind turbines. Furthermore, wake accuracy could decrease due to the excessive variables that come from the wake effect parameters. In this paper, we intend to conduct research to improve prediction accuracy by considering the wake effect of wind turbines using supervisory control and data acquisition (SCADA) data from the Dongbok wind farm. The wake divides the wind direction into four parts and then recognizes and predicts the affected wind turbine. The predicted result is the wake wind speed and its conversion to power generation by applying a power curve. We try to show the efficiency of machine learning by comparing the wake wind speed and the power generation in the wake model. This result shows the error rate using evaluation metrics of regression, such as mean squared error (MSE), root mean squared error (RMSE), and weighted absolute percentage error (WAPE), and attempts to verify power system impact and efficiency through a real-time digital simulator (RTDS). [ABSTRACT FROM AUTHOR]

Sub-synchronous oscillation is one of the most challenging issues in modern power systems with a high proportion of wind power. Interactions among the wind turbines are key factors causing the oscillations. This paper aims to propose a method to quantify the interactions among N permanent-magnet-synchronous-generator (PMSG)-based wind turbines by transfer functions and analyze the influence of the interactions on the system stability. We derived different terms of the self- and en-stabilizing functions to describe different interactions caused by different wind turbines analytically. Meanwhile, the parameter sensitivity of this method is proposed to analyze the impact of the system and control parameters on the interactions and the system stability. Examples and simulations are given to show the effectiveness of this method. [ABSTRACT FROM AUTHOR]

Rising wind energy integration, accompanied by a decreasing level of system inertia, requires additional sources of ancillary services. Wind turbines based on doubly fed induction generators (DFIGs) can provide inertial and primary frequency support when equipped with specific controls. This paper investigates the effect of frequency support provision by DFIGs on the small-signal stability of power systems. To this end, a modified version of the Kundur two-area test system is employed to analyze different scenarios. Wind energy generation is either added to the existing system or displaces part of the synchronous generation. Simulations show that primary frequency support tends to improve the damping of electromechanical oscillations and deteriorate it for converter control-based ones. On the other hand, the inertial response depends on the control parameters. [ABSTRACT FROM AUTHOR]

As clean and low-carbon energy, wind energy has attracted the attention of many countries. The main bearing in the transmission system of large-scale wind turbines (WTs) is the most important part. The research on the condition monitoring of the main bearing has received more attention from many scholars and the wind industry, and it has become a hot research topic. The existing research on the condition monitoring of the main bearing has the following drawbacks: (1) the existing research assigns the same weight to each condition parameter variable, and the model extracts features indiscriminately; (2) different historical time points of the condition parameter variable are given the same weight, and the influence degree of different historical time points on the current value is not considered; and (3) the existing literature does not consider the operating characteristics of WTs. Different operating conditions have different control strategies, which also determine which condition parameters are artificially controlled. Therefore, to solve the problems above, this paper proposes a novel method for condition monitoring of WT main bearings by applying the dual attention mechanism and Bi-LSTM, named Dual Attention-Based Bi-LSTM (DA-Bi-LSTM). Specifically, two attention calculation modules are designed to extract the important features of different input parameters and the important features of input parameter time series, respectively. Then, the two extracted features are fused, and the Bi-LSTM building block is utilized to perform pre-and post-feature extraction of the fused information. Finally, the extracted features are applied to reconstruct the input data. Extensive experiments verify the performance of the proposed method. Compared with the Bi-LSMT model without adding an attention module, the proposed model achieves 19.78%, 2.17%, and 18.92% improvement in MAE, MAPE, and RMSE, respectively. Compared with the Bi-LSTM model which only considers a single attention mechanism, the proposed model achieves the largest improvement in MAE and RMSE by 28.84% and 30.37%. Furthermore, the proposed model has better stability and better interpretability of the monitoring process. [ABSTRACT FROM AUTHOR]

The Unified Power Quality Conditioner (UPQC) is one of the Custom Power devices (CP), and it mitigates both load current and supply voltage problems (voltage swells, sags, harmonics, etc.) simultaneously. By using CP, we are getting more familiar with renewable energy's high penetration on the electrical grid because of its intermittent nature, which causes power flection. We are also using powered electronic devices, and non-linear loads produce harmonics that affect the voltage and current waveform. In this paper, a UPQC will be used with a sensitive load that is connected to a grid (grid–wind turbine) power system. The UPQC will operate under different disturbances such as phase-to-ground fault, non-linear load on the grid side, and non-linear load in parallel with the sensitive load, using pulse-width modulation and hysteresis as switching techniques. Simulation results using MATLAB/Simulink are used to compare the two pulsing-generating techniques and show that electrical power is continuously fed to the load in all disturbances with total harmonic distortion (THD) less than 5% for voltage and 4.5% for current. [ABSTRACT FROM AUTHOR]

This paper presents the implementation of a fuzzy control strategy for speed regulation of an electromagnetic frequency regulator (EFR) prototype, aiming to eliminate the dependence on knowledge of physical parameters in the most diverse operating conditions. Speed multiplication is one of the most important steps in wind power generation. Gearboxes are generally used for this purpose. However, they have a reduced lifespan and a high failure rate, and are still noise sources. The search for new ways to match the speed (and torque) between the turbine and the generator is an important research area to increase the energy, financial, and environmental efficiency of wind systems. The EFR device is an example of an alternative technology that this team of researchers has proposed. It considers the main advantages of an induction machine with the rotor in a squirrel cage positively. In the first studies, the EFR control strategy consisted of the conventional PID controllers, which have several limitations that are widely discussed in the literature. This strategy also limits the EFR's performance, considering its entire operating range. The simulation program was developed using the Matlab/Simulink platform, while the experimental results were obtained in the laboratory emulating the EFR-based system. The EFR prototype has 2 poles, a nominal power of 2.2 kW, and a nominal frequency of 60 Hz. Experimental results were presented to validate the efficiency of the proposed control strategy. [ABSTRACT FROM AUTHOR]

With the participation of wind power in grid frequency modulation, the fatigue load of the wind turbine increases accordingly. A new control method that considers both fatigue load and output power of wind turbine (WT) is proposed in this paper. A linear active disturbance rejection control (LADRC) is designed and applied for the pitch angle in the wind turbine load reduction control. The particle swarm optimization (PSO) algorithm is used to optimize the parameters of the wind turbine controller, and the total variation of the wind turbine shaft torque and tower bending moment is added to construct a new objective function to further reduce the fatigue load of the wind turbine. The design-optimized controller is validated on a 5 MW wind turbine in SimWindFarm. The simulation results show that the LADRC controller can accurately track the reference power of the wind turbine, reduce the pitch angle fluctuation of the wind turbine, reduce the fatigue load of the wind turbine, and improve the service life of the wind turbine. [ABSTRACT FROM AUTHOR]

Vibrations occur in the wind turbine drivetrain due to the drivetrain's elasticity and gear clearance. Typically, the PID control method is used to suppress elastic vibration, while the method with the disturbance suppression function is used to suppress nonlinear gear clearance vibration. The purpose of this paper is to propose an equivalent PID control method based on the internal model control (IMC) for suppressing vibration caused by the wind turbine drivetrain's elasticity and gear clearance. The equivalent PID controller can suppresses elastic vibration; the IMC controller can suppresses gear clearance vibration. First, the vibration principle of the two-mass wind turbine drivetrain with clearance is discussed. After analyzing the nonlinear characteristics of the gear clearance, the nonlinear clearance system is decomposed into a linear unit and a nonlinear bounded disturbance unit. To suppress nonlinear bounded disturbances, a disturbance suppression method based on IMC is proposed; simultaneously, an equivalent PID controller based on IMC is designed to resolve the vibration issue caused by the wind turbine drivetrain's elasticity. The simulation experimental results show that the clearance vibration is suppressed by the original IMC method. The PID controller obtained by the IMC equivalent transformation can suppress the elastic vibration. [ABSTRACT FROM AUTHOR]