Search

Oil–paper insulation is the critical insulation element in the modern power system. Under a harsh operating environment, oil–paper insulation will deteriorate gradually, resulting in electrical accidents. Thus, it is important to evaluate and monitor the insulation state of oil–paper insulation. Firstly, this paper introduces the geometric structure and physical components of oil–paper insulation and shows the main reasons and forms of oil–paper insulation's degradation. Then, this paper reviews the existing condition assessment techniques for oil–paper insulation, such as the dissolved gas ratio analysis, aging kinetic model, cellulose–water adsorption isotherm, oil–paper moisture balance curve, and dielectric response technique. Additionally, the advantages and limitations of the above condition assessment techniques are discussed. In particular, this paper highlights the dielectric response technique and introduces its evaluation principle in detail: (1) collecting the dielectric response data, (2) extracting the feature parameters from the collected dielectric response data, and (3) establishing the condition assessment models based on the extracted feature parameters and the machine learning techniques. Finally, two full potential studies are proposed, which research hotspots' oil–paper insulation and the electrical–chemical joint evaluation technique. In summary, this paper concludes the principles, advantages and limitation of the existing condition assessment techniques for oil–paper insulation, and we put forward two potential research avenues. [ABSTRACT FROM AUTHOR]

The methods of artificial intelligence (AI) have been used in the planning and operation of electric power systems for more than 40 years. In recent years, due to the development of microprocessor and data storage technologies, the effectiveness of this use has greatly increased. This paper provides a systematic overview of the application of AI, including the use of machine learning (ML) in the electric power system. The potential application areas are divided into four blocks and the classification matrix has been used for clustering the AI application tasks. Furthermore, the data acquisition methods for setting the parameters of AI and ML algorithms are presented and discussed in a systematic way, considering the supervised and unsupervised learning methods. Based on this, three complex application examples, being wind power generation forecasting, smart grid security assessment (using two methods), and automatic system fault detection are presented and discussed in detail. A summary and outlook conclude the paper. [ABSTRACT FROM AUTHOR]

This document discusses the degradation and failure mechanisms of dielectric insulation in medium- and high-voltage power equipment. It highlights the importance of controlling insulation material degradation to prevent equipment failures and reduce the risk of environmental pollution. The document includes several research papers that address various topics related to the measurement, monitoring, and improvement of power equipment components. These papers cover issues such as winding breakdown faults in transformers, overvoltages caused by vacuum circuit breaker interruptions, insulation resistance degradation in cables, temperature rise in composite insulators, partial discharges and their effects on insulation, and acoustic inspection for detecting partial discharges. The document also presents studies on the technical condition of on-load tap changers, the behavior of silicone elastomers under electrical and mechanical stress, and the percolation phenomenon in square matrices. [Extracted from the article]

As the demand for electricity, electrification, and renewable energy rises, accurate forecasting and flexible energy management become imperative. Distribution network operators face capacity limits set by regional grids, risking economic penalties if exceeded. This study examined data-driven approaches of load forecasting to address these challenges on a city scale through a use case study of Eskilstuna, Sweden. Multiple Linear Regression was used to model electric load data, identifying key calendar and meteorological variables through a rolling origin validation process, using three years of historical data. Despite its low cost, Multiple Linear Regression outperforms the more expensive non-linear Light Gradient Boosting Machine, and both outperform the "weekly Naïve" benchmark with a relative Root Mean Square Errors of 32–34% and 39–40%, respectively. Best-practice hyperparameter settings were derived, and they emphasize frequent re-training, maximizing the training data size, and setting a lag size larger than or equal to the forecast horizon for improved accuracy. Combining both models into an ensemble could the enhance accuracy. This paper demonstrates that robust load forecasts can be achieved by leveraging domain knowledge and statistical analysis, utilizing readily available machine learning libraries. The methodology for achieving this is presented within the paper. These models have the potential for economic optimization and load-shifting strategies, offering valuable insights into sustainable energy management. [ABSTRACT FROM AUTHOR]

With the development of smart grids and new power systems, the combination of non-intrusive load identification technology and smart home technology can provide users with the operating conditions of home appliances and equipment, thus reducing home energy loss and improving users' ability to demand a response. This paper proposes a non-intrusive load decomposition model with a parallel multiscale attention mechanism (PMAM). The model can extract both local and global feature information and fuse it through a parallel multiscale network. This improves the attention mechanism's ability to capture feature information over long time periods. To validate the model's decomposition ability, we combined the PMAM model with four benchmark models: the Long Short-Term Memory (LSTM) recurrent neural network model, the Time Pooling-based Load Disaggregation Model (TPNILM), the Extreme Learning Machine (ELM), and the Load Disaggregation Model without Parallel Multi-scalar Attention Mechanisms (UNPMAM). The model was trained on the publicly available UK-DALE dataset and tested. The models' test results were quantitatively evaluated using a confusion matrix. This involved calculating the F1 score of the load decomposition. A higher F1 score indicates better model decomposition performance. The results indicate that the PMAM model proposed in this paper maintains an F1 score above 0.9 for the decomposition of three types of electrical equipment under the same household user, which is 3% higher than that of the other benchmark models on average. In the cross-household test, the PMAM also demonstrated a better decomposition ability, with the F1 score maintained above 0.85, and the mean absolute error (MAE) decreased by 5.3% on average compared with that of the UNPMAM. [ABSTRACT FROM AUTHOR]

Operating nuclear power plants (NPPs) generate and collect large amounts of equipment reliability (ER) element data that contain information about the status of components, assets, and systems. Some of this information is in textual form where the occurrence of abnormal events or maintenance activities are described. Analyses of NPP textual data via natural language processing (NLP) methods have expanded in the last decade, and only recently the true potential of such analyses has emerged. So far, applications of NLP methods have been mostly limited to classification and prediction in order to identify the nature of the given textual element (e.g., safety or non-safety relevant). In this paper, we target a more complex problem: the automatic generation of knowledge based on a textual element in order to assist system engineers in assessing an asset's historical health performance. The goal is to assist system engineers in the identification of anomalous behaviors, cause–effect relations between events, and their potential consequences, and to support decision-making such as the planning and scheduling of maintenance activities. "Knowledge extraction" is a very broad concept whose definition may vary depending on the application context. In our particular context, it refers to the process of examining an ER textual element to identify the systems or assets it mentions and the type of event it describes (e.g., component failure or maintenance activity). In addition, we wish to identify details such as measured quantities and temporal or cause–effect relations between events. This paper describes how ER textual data elements are first preprocessed to handle typos, acronyms, and abbreviations, then machine learning (ML) and rule-based algorithms are employed to identify physical entities (e.g., systems, assets, and components) and specific phenomena (e.g., failure or degradation). A few applications relevant from an NPP ER point of view are presented as well. [ABSTRACT FROM AUTHOR]

This paper presents a detailed review of the existing literature on peer-to-peer (P2P) energy trading considering market architectures, trading strategies, and enabling technologies. P2P energy trading enables individual users in the electricity network to act as sellers or buyers and trade energy among each other. To facilitate the discussion on different aspects of P2P energy trading, this paper focuses on P2P market mechanisms, relevant bidding strategies, and auction models. In addition, to solve the energy management problems associated with P2P energy trading, this paper investigates widely used solution methods such as game-theoretic models, mathematical optimisation, as well as more recent machine learning techniques and evaluates them in a critical manner. The outcomes of this investigation along with the identification of the challenges and limitations will allow researchers to find suitable P2P energy trading mechanisms based on different market contexts. Moreover, the discussions on potential future research directions are expected to improve the effectiveness of P2P energy trading technologies. [ABSTRACT FROM AUTHOR]

The digitization of distribution power systems has revolutionized the way data are collected and analyzed. In this paper, the critical task of harnessing this information to identify irregularities and anomalies in electricity consumption is tackled. The focus is on detecting non-technical losses (NTLs) and energy theft within distribution networks. A comprehensive overview of the methodologies employed to uncover NTLs and energy theft is presented, leveraging measurements of electricity consumption. The most common scenarios and prevalent cases of anomalies and theft among consumers are identified. Additionally, statistical indicators tailored to specific anomalies are proposed. In this research paper, the practical implementation of numerous artificial intelligence (AI) algorithms, including the artificial neural network (ANN), ANFIS, autoencoder neural network, and K-mean clustering, is highlighted. These algorithms play a central role in our research, and our primary objective is to showcase their effectiveness in identifying NTLs. Real-world data sourced directly from distribution networks are utilized. Additionally, we carefully assess how well statistical methods work and compare them to AI techniques by testing them with real data. The artificial neural network (ANN) accurately identifies various consumer types, exhibiting a frequency error of 7.62%. In contrast, the K-means algorithm shows a slightly higher frequency error of 9.26%, while the adaptive neuro-fuzzy inference system (ANFIS) fails to detect the initial anomaly type, resulting in a frequency error of 11.11%. Our research suggests that AI can make finding irregularities in electricity consumption even more effective. This approach, especially when using data from smart meters, can help us discover problems and safeguard distribution networks. [ABSTRACT FROM AUTHOR]

Under the premise of ensuring the safe and stable operation of a wind–thermal–storage power system, this paper proposes an optimization model aimed at improving its overall economic efficiency and effectively reducing the peak-to-valley load difference. The model transforms the multi-objective optimization problem to solve a feasible interval of weight coefficients. We introduce a novel fusion model, where a Convolutional Neural Network (CNN) is melded with a Long Short-Term Memory Network (LSTM) to form the target network structure. Additionally, for datasets with limited samples, we incorporate a Self-Attention Mechanism (SAM) into the Model-Agnostic Meta-Learning (MAML). Ultimately, we build an MAML-SAM-CNN-LSTM network model to solve the interval of weight coefficients. An arithmetic validation of a modified IEEE 30-node system demonstrates that the MAML-SAM-CNN-LSTM network proposed in this paper can adeptly solve the feasible intervals of weight coefficients in the optimization model of the wind-thermal storage system. This is achieved under the constraints of the specified wind-thermal storage power system operation indexes. The evaluation indexes of the network model, including its accuracy, precision, recall, and F1 score, all exceed 98.72%, 98.57%, 98.30%, and 98.57%, respectively. This denotes a superior performance compared to the other three network models, offering an effective reference for optimizing decision-making and facilitating the enhanced realization of multi-objective, on-demand scheduling in the wind-thermal storage power system. [ABSTRACT FROM AUTHOR]

Modern electrical power systems are characterized by a high rate of transient processes, the use of digital monitoring and control systems, and the accumulation of a large amount of technological information. The active integration of renewable energy sources contributes to reducing the inertia of power systems and changing the nature of transient processes. As a result, the effectiveness of emergency control systems decreases. Traditional emergency control systems operate based on the numerical analysis of power system dynamic models. This allows for finding the optimal set of preventive commands (solutions) in the form of disconnections of generating units, consumers, transmission lines, and other primary grid equipment. Thus, the steady-state or transient stability of a power system is provided. After the active integration of renewable sources into power systems, traditional emergency control algorithms became ineffective due to the time delay in finding the optimal set of control actions. Currently, machine learning algorithms are being developed that provide high performance and adaptability. This paper contains a meta-analysis of modern emergency control algorithms for power systems based on machine learning and synchronized phasor measurement data. It describes algorithms for determining disturbances in the power system, selecting control actions to maintain transient and steady-state stability, stability in voltage level, and limiting frequency. This study examines 53 studies piled on the development of a methodology for analyzing the stability of power systems based on ML algorithms. The analysis of the research is carried out in terms of accuracy, computational latency, and data used in training and testing. The most frequently used textual mathematical models of power systems are determined, and the most suitable ML algorithms for use in the operational control circuit of power systems in real time are determined. This paper also provides an analysis of the advantages and disadvantages of existing algorithms, as well as identifies areas for further research. [ABSTRACT FROM AUTHOR]

The transportation sector remains a major contributor to greenhouse gas emissions. The understanding of energy-efficient driving behaviors and utilization of energy-efficient driving strategies are essential to reduce vehicles' fuel consumption. However, there is no comprehensive investigation into energy-efficient driving behaviors and strategies. Furthermore, many state-of-the-art AI models have been applied for the analysis of eco-friendly driving styles, but no overview is available. To fill the gap, this paper conducts a thorough literature review on ecological driving behaviors and styles, and analyzes the driving factors influencing energy consumption and state-of-the-art methodologies. With a thorough scoping review process, thirty-seven articles with full text were assessed, and the methodological and related data are compared. The results show that the factors that impact driving behaviors can be summarized into eleven features including speed, acceleration, deceleration, pedal, steering, gear, engine, distance, weather, traffic signal, and road parameters. This paper finds that supervised/unsupervised learning algorithms and reinforcement learning frameworks have been popularly used to model the vehicle's energy consumption with multi-dimensional data. Furthermore, the literature shows that the driving data are collected from either simulators or real-world experiments, and the real-world data are mainly stored and transmitted by meters, controller area networks, onboard data services, smartphones, and additional sensors installed in the vehicle. Based on driving behavior factors, driver characteristics, and safety rules, this paper recommends nine energy-efficient driving styles including four guidelines for the drivers' selection and adjustment of the vehicle parameters, three recommendations for the energy-efficient driving styles in different driving scenarios, and two subjective suggestions for different types of drivers and employers. [ABSTRACT FROM AUTHOR]

Drying processes are among the most energy-intensive industrial processes. There is a need for development of the efficient methods needed for estimating, measuring, and reducing energy use. Different machine learning algorithms might provide some of the answers to these issues in a faster and less costly way, without the need for time-consuming and expensive experiments done at different scales of the dryers. The aim of this paper was to provide a comprehensive overview of machine learning applications for addressing energy-related challenges by exploration of different energy types and energy reduction opportunities. Also, the analysis of the applied algorithms, their specific applications and a critical evaluation of the obtained results are provided. The paper is based on the necessity of the improvements in energy use needed for drying related on the existing data. The overview of the ways for such achievements, and a general classification of machine learning algorithm are the background of the paper. The methods used are the machine learning techniques employed in different energy-related issues for drying processes. The paper focuses on the applications of artificial neural networks and other machine learning algorithms and models for different energy-related issues, including different energy types applications, challenges associated with energy consumption, and opportunities for energy reduction. Not only the applied algorithms, but also their specific applications, and the statistical analysis of the obtained results are also overviewed. Finally, a critical evaluation of the findings highlighting the potentials of machine learning algorithms in addressing energy-related challenges (such as estimation of energy consumption, opportunities for energy reduction, and use of different energy sources) is provided. The presented analysis underscored the effectiveness of machine learning applications for these purposes. [ABSTRACT FROM AUTHOR]

Solar forecasting is becoming increasingly important due to the exponential growth in total global solar capacity each year. More photovoltaic (PV) penetration in the grid poses problems for grid stability due to the inherent intermittent and variable nature of PV power production. Therefore, forecasting of solar quantities becomes increasingly important to grid operators and market participants. This review presents the most recent relevant studies focusing on short-term forecasting of solar irradiance and PV power production. Recent research has increasingly turned to machine learning to address this challenge. The paper provides a discussion about building a solar forecasting model, including evaluation measures and machine learning method selection through analysed literature. Given that machine learning is data-driven, the focus of this review has been placed on data sources referenced in the literature. Open-access data sources have been compiled and explored. The main contribution of this paper is the establishment of a benchmark for assessing the performance of solar forecasting models. This benchmark utilizes the mentioned open-source datasets, offering a standardized platform for future research. It serves the crucial purpose of streamlining investigations and facilitating direct comparisons among different forecasting methodologies in the field of solar forecasting. [ABSTRACT FROM AUTHOR]

Improved and efficient recovery methods are investigated as possible candidates to arrest the production decline and to improve the injection capacity in hydrocarbon fields in Lithuania. The data show that the Cambrian reservoirs in Lithuania are mixed to oil-wet in nature, which results in poor water-flooding efficiency. Wettability alteration could help in improved water injection and, at the same time, it could help recover additional oil from the residual oil saturation zone of the reservoir. In this paper, a screening exercise is conducted to help alter reservoir wettability, improve water injection efficiency, and to improve oil recovery. Analytical and machine-learning supported methods are used for screening. Based on the screening results, dilute surfactant-based injection techniques are suggested as a potential method to improve injectivity and, thereby, recovery from the field. An initial experimental analysis targets the wettability of the rock from the field, followed by testing for wettability-altering surfactants. Based on the findings of the screening study and experimental analysis, it is recommended that we initiate a core flooding experimental program to investigate wettability changes and enhance injection and recovery from the field. [ABSTRACT FROM AUTHOR]

Using multiple input power sources increases the reliability of electric vehicles compared to a single source. However, the inclusion of other sources exhibits complexity in the controller system, such as computing time, program difficulty, and switching speed to connect or disconnect the input power to load. To ensure optimal performance and avoid overloading issues, the EV system needs sophisticated control. This work introduces a machine-learning-based controller using an artificial neural network to solve these problems. This paper describes the detailed power management control methodology using multiple sources like solar PV, fuel cells, and batteries. Novel control with an instantaneous reference current scheme is used to manage the input power sources to satisfy the power demand of electric vehicles. The proposed work executes the power split-up operation with standard and actual drive cycles and maximum power point tracking for PV panels using MATLAB Simulink. Finally, power management with a machine learning technique is implemented in an experimental analysis with the LabVIEW software, and an FPGA controller is used to control a 48 V, 1 kW permanent-magnet synchronous machine. [ABSTRACT FROM AUTHOR]

In order to improve the reliability and life of the wind turbine, this paper takes the rolling bearing in the experimental platform of the wind turbine as the research object. In order to obtain the intrinsic mode function (IMF) of each fault type, the original signals of different fault states of the rolling bearing on the experimental platform are decomposed by using the overall average empirical mode decomposition method (EEMD) and the wavelet packet decomposition method (WPD), respectively. Then the energy ratio of the IMF component of the different types of faults to the total energy value is calculated and the eigenvectors of different types of faults are constructed. The extreme learning machine (ELM) and probabilistic neural network (PNN) are used to learn fault types and eigenvector samples to identify the faults of the rolling bearing. It is found that the bearing fault characteristics obtained by the WPD method are more obvious, and the results obtained by the same recognition method are ideal; and the PNN method is obviously superior to the extreme learning machine method in bearing fault recognition rate. [ABSTRACT FROM AUTHOR]

Energy management systems allow the Smart Grids industry to track, improve, and regulate energy use. Particularly, demand-side management is regarded as a crucial component of the entire Smart Grids system. Therefore, by aligning utility offers with customer demand, anticipating future energy demands is essential for regulating consumption. An updated examination of several forecasting techniques for projecting energy short-term load forecasts is provided in this article. Each class of algorithms, including statistical techniques, Machine Learning, Deep Learning, and hybrid combinations, are comparatively evaluated and critically analyzed, based on three real consumption datasets from Spain, Germany, and the United States of America. To increase the size of tiny training datasets, this paper also proposes a data augmentation technique based on Generative Adversarial Networks. The results show that the Deep Learning-hybrid model is more accurate than traditional statistical methods and basic Machine Learning procedures. In the same direction, it is demonstrated that more comprehensive datasets assisted by complementary data, such as energy generation and weather, may significantly boost the accuracy of the models. Additionally, it is also demonstrated that Generative Adversarial Networks-based data augmentation may greatly improve algorithm accuracy. [ABSTRACT FROM AUTHOR]

With the continuous improvement of shale oil and gas recovery technologies and achievements, a large amount of geological information and data have been accumulated for the description of shale reservoirs, and it has become possible to use machine learning methods for "sweet spots" prediction in shale oil and gas areas. Taking the Duvernay shale oil and gas field in Canada as an example, this paper attempts to build recoverable shale oil and gas reserve prediction models using machine learning methods and geological and development big data, to predict the distribution of recoverable shale oil and gas reserves and provide a basis for well location deployment and engineering modifications. The research results of the machine learning model in this study are as follows: ① Three machine learning methods were applied to build a prediction model and random forest showed the best performance. The R2 values of the built recoverable shale oil and gas reserves prediction models are 0.7894 and 0.8210, respectively, with an accuracy that meets the requirements of production applications; ② The geological main controlling factors for recoverable shale oil and gas reserves in this area are organic matter maturity and total organic carbon (TOC), followed by porosity and effective thickness; the main controlling factor for engineering modifications is the total proppant volume, followed by total stages and horizontal lateral length; ③ The abundance of recoverable shale oil and gas reserves in the central part of the study area is predicted to be relatively high, which makes it a favorable area for future well location deployment. [ABSTRACT FROM AUTHOR]

The recent energy crisis has renewed interest in forecasting crude oil prices. This paper focuses on identifying the main drivers determining the evolution of crude oil prices and proposes a statistical learning forecasting algorithm based on regression analysis that can be used to generate future oil price scenarios. A combination of a generalized additive model with a linear transfer function with ARIMA noise is used to capture the existence of combinations of non-linear and linear relationships between selected input variables and the crude oil price. The results demonstrate that the physical market balance or fundamental is the most important metric in explaining the evolution of oil prices. The effect of the trading activity and volatility variables are significant under abnormal market conditions. We show that forecast accuracy under the proposed model supersedes benchmark specifications, including the futures prices and analysts' forecasts. Four oil price scenarios are considered for expository purposes. [ABSTRACT FROM AUTHOR]

This paper presents a new approach for the online estimation of stator and rotor resistance of induction motors for speed sensorless vector-controlled drives, using feed-forward artificial neural networks with advanced adaptive learning rates. For the rotor resistance estimation, a neural network model based on rotor speed and stator currents is developed. The rotor flux linkages acquired from the voltage model are compared with the neural network model. The feed-forward neural network employs an adaptive learning rate as the function of the obtained error during training for quick convergence with minimal estimation error. A two-layered neural network model based on the stator voltage and current equations is developed for the stator resistance estimation. The d-q axes stator currents obtained from the developed model are compared with the acquired d-q axes stator currents. For the fast convergence with minimal estimation error, an adaptive learning rate as the function of error is adopted during training. Furthermore, the neural network estimates the induction motor's speed. The simulation and experimental results justify that the developed algorithms track variation in the resistances quickly and precisely along with the speed as compared with the conventional constant learning rate algorithm, leading to reliable operation of the drive. [ABSTRACT FROM AUTHOR]

Increasingly stringent pollutant emission regulations and a customer demand for a high-fuel economy drive the modern automotive industry to hurriedly solve the problem of decarbonization and powertrain efficiency, leading R&D towards alternative powertrain solutions and fuels. Electrification, today, plays the biggest role in the topic, with Mild Hybrid Electrified Vehicles (MHEVs) being the most cost-effective architectures, displaying dominance in smaller markets such as Brazil. One of the biggest challenges for HEVs' development is the complexity of the hybrid control system, knowing when to actuate the electric machine, and the optimum power delivery, plus the gearshift schedule becomes a hard optimization problem that plays a key role in powertrain efficiency and cost savings for the customer. This paper proposes the implementation of a genetic algorithm (GA) as a machine learning-based control strategy to determine the torque split and the gear engaged for each driving condition of an MHEV operation, aiming to optimize fuel consumption. A quasi-static model of the vehicle was developed in Matlab/Simulink version 2022b, the virtual vehicle was then tested following the FTP75 and HWFET driving cycles. Simulation results indicate that the control decisions taken by the GA are qualitatively coherent for all operation conditions, and even quantitatively coherent in some cases, and that the software has the potential to be used as a control strategy outside the simulation environment, in future steps of development. [ABSTRACT FROM AUTHOR]

Non-Intrusive Load Monitoring (NILM), which provides sufficient load for the energy consumption of an entire building, has become crucial in improving the operation of energy systems. Although NILM can decompose overall energy consumption into individual electrical sub-loads, it struggles to estimate thermal-driven sub-loads such as occupants. Previous studies proposed Non-Intrusive Thermal Load Monitoring (NITLM), which disaggregates the overall thermal load into sub-loads; however, these studies evaluated only a single building. The results change for other buildings due to individual building factors, such as floor area, location, and occupancy patterns; thus, it is necessary to analyze how these factors affect the accuracy of disaggregation for accurate monitoring. In this paper, we conduct a fundamental evaluation of NITLM in various realistic office buildings to accurately disaggregate the overall thermal load into sub-loads, focusing on occupant thermal load. Through experiments, we introduce NITLM with deep learning models and evaluate these models using thermal load datasets. These thermal load datasets are generated by a building energy simulation, and its inputs for the simulation were derived from realistic data like HVAC on/off data. Such fundamental evaluation has not been done before, but insights obtained from the comparison of learning models are necessary and useful for improving learning models. Our experimental results shed light on the deep learning-based NITLM models for building-level efficient energy management systems. [ABSTRACT FROM AUTHOR]

In the Industry 4.0 era of smart grids, the real-world problem of blackouts and cascading failures due to cyberattacks is a significant concern and highly challenging because the existing Intrusion Detection System (IDS) falls behind in handling missing rates, response times, and detection accuracy. Addressing this problem with an early attack detection mechanism with a reduced missing rate and decreased response time is critical. The development of an Intelligent IDS is vital to the mission-critical infrastructure of a smart grid to prevent physical sabotage and processing downtime. This paper aims to develop a robust Anomaly-based IDS using a statistical approach with a machine learning classifier to discriminate cyberattacks from natural faults and man-made events to avoid blackouts and cascading failures. The novel mechanism of a statistical approach with a machine learning (SAML) classifier based on Neighborhood Component Analysis, ExtraTrees, and AdaBoost for feature extraction, bagging, and boosting, respectively, is proposed with optimal hyperparameter tuning for the early discrimination of cyberattacks from natural faults and man-made events. The proposed model is tested using the publicly available Industrial Control Systems Cyber Attack Power System (Triple Class) dataset with a three-bus/two-line transmission system from Mississippi State University and Oak Ridge National Laboratory. Furthermore, the proposed model is evaluated for scalability and generalization using the publicly accessible IEEE 14-bus and 57-bus system datasets of False Data Injection (FDI) attacks. The test results achieved higher detection accuracy, lower missing rates, decreased false alarm rates, and reduced response time compared to the existing approaches. [ABSTRACT FROM AUTHOR]

Accurate prediction of crude petroleum production in oil fields plays a crucial role in analyzing reservoir dynamics, formulating measures to increase production, and selecting ways to improve recovery factors. Current prediction methods mainly include reservoir engineering methods, numerical simulation methods, and deep learning methods, and the required prerequisite is a large amount of historical data. However, when the data used to train the model are insufficient, the prediction effect will be reduced dramatically. In this paper, a time series-related meta-learning (TsrML) method is proposed that can be applied to the prediction of petroleum time series containing small samples and can address the limitations of traditional deep learning methods for the few-shot problem, thereby supporting the development of production measures. The approach involves an architecture divided into meta-learner and base-learner, which learns initialization parameters from 89 time series datasets. It can be quickly adapted to achieve excellent and accurate predictions with small samples in the oil field. Three case studies were performed using time series from two actual oil fields. For objective evaluation, the proposed method is compared with several traditional methods. Compared to traditional deep learning methods, RMSE is decreased by 0.1766 on average, and MAPE is decreased by 4.8013 on average. The empirical results show that the proposed method outperforms the traditional deep learning methods. [ABSTRACT FROM AUTHOR]

The scientific community has shown considerable interest in Industry 4.0 due to its capacity to revolutionise the manufacturing sector through digitalisation and data-driven decision-making. However, the actual implementation of Industry 4.0 within complex industrial settings presents obstacles that are typically beyond the scope of mainstream research articles. In this paper, a comprehensive case-study detailing our collaborative partnership with a leading medical device manufacturer is presented. The study traces its evolution from a state of limited digitalisation to the development of a digital intelligence platform that leverages data and machine learning models to enhance operations across a wide range of critical machines and assets. The main business objective was to enhance the energy efficiency of the manufacturing process, thereby improving its sustainability measures while also saving costs. The project encompasses energy modelling and analytics, Fault Detection and Diagnostics (FDD), renewable energy integration and advanced visualisation tools. Together, these components enable informed decision making in the context of energy efficiency. [ABSTRACT FROM AUTHOR]

Transient stability of the electric power system still heavily rests on a timely and correct operation of the relay protection of individual power generators. Power swings and generator pole slips, following network short-circuit events, can initiate false relay activations, with negative repercussions for the overall system stability. This paper will examine the generator's underimpedance (21G) and out-of-step (78) protection functions and will propose a machine learning based classifier for supporting and reinforcing their decision-making logic. The classifier, based on a support vector machine, will aid in blocking the underimpedance protection during stable generator swings. It will also enable faster tripping of the out-of-step protection for unstable generator swings. Both protection functions will feature polygonal protection characteristics. Their implementation will be based on European practice and IEC standards. Classifier will be trained and tested on the data derived from simulations of the IEEE New England 10-generator benchmark power system. [ABSTRACT FROM AUTHOR]

Proton exchange membrane fuel cells (PEMFCs) constitute nonlinear systems that are challenging to model accurately. Therefore, a controller with robustness and adaptability is imperative for temperature control within the PEMFC stack. This paper introduces a data-driven controller utilizing deep reinforcement learning for stack temperature control. Given the PEMFC system's characteristics, such as nonlinearity, uncertainty, and environmental conditions, we propose a novel deep reinforcement learning algorithm—the deep deterministic policy gradient with priority experience playback and importance sampling method (PEI-DDPG). Algorithm design incorporates technologies such as priority experience playback, importance sampling, and optimized sample data storage structure, enhancing the controller's performance. Simulation results demonstrate the proposed algorithm's superior effectiveness in temperature control for PEMFC, leveraging the PEI-DDPG algorithm's high adaptability and robustness. The proposed algorithm's effectiveness is additionally validated on the RT-LAB experimental platform. The proposed PEI-DDPG algorithm reduces the average adjustment time by 8.3%, 17.13%, and 24.56% and overshoots by 2.12 times, 4.16 times, and 4.32 times compared to the TD3, GA-PID, and PID algorithms, respectively. [ABSTRACT FROM AUTHOR]

The electricity market is constantly evolving, being driven by factors such as market liberalization, the increasing use of renewable energy sources (RESs), and various economic and political influences. These dynamics make it challenging to predict wholesale electricity prices. Accurate short-term forecasting is crucial to maintaining system balance and addressing anomalies such as negative prices and deviations from predictions. This paper investigates short-term electricity price forecasting using historical time series data and employs advanced deep learning algorithms. First, four deep learning models are implemented and proposed, which are a convolutional neural network (CNN) with an integrated attention mechanism, a hybrid CNN followed by a gated recurrent unit model (CNN-GRU) with an attention mechanism, and two ensemble learning models, which are a soft voting ensemble and a stacking ensemble model. Also, the optimized version of a transformer model, the Multi-Head Attention model, is introduced. Finally, the perceptron model is used as a benchmark for comparison. Our results show excellent prediction accuracy, particularly in the hybrid CNN-GRU model with attention, thereby achieving a mean absolute percentage error (MAPE) of 6.333%. The soft voting ensemble model and the Multi-Head Attention model also performed well, with MAPEs of 6.125% and 6.889%, respectively. These findings are significant, as previous studies have not shown high performance with transformer models and attention mechanisms. The presented results offer promising insights for future research in this field. [ABSTRACT FROM AUTHOR]

The prognosis of wind turbine failures in real operating conditions is a significant gap in the academic literature and is essential for achieving viable performance parameters for the operation and maintenance of these machines, especially those located offshore. This paper presents a framework for estimating the remaining useful life (RUL) of the main bearing using regression models fed operational data (temperature, wind speed, and the active power of the network) collected by a supervisory control and data acquisition (SCADA) system. The framework begins with a careful data filtering process, followed by creating a degradation profile based on identifying the behavior of temperature time series. It also uses a cross-validation strategy to mitigate data scarcity and increase model robustness by combining subsets of data from different available turbines. Support vector, gradient boosting, random forest, and extra trees models were created, which, in the tests, showed an average of 20 days in estimating the remaining useful life and presented mean absolute error (MAE) values of 0.047 and mean squared errors (MSE) of 0.012. As its main contributions, this work proposes (i) a robust and effective regression modeling method for estimating RUL based on temperature and (ii) an approach for dealing with a lack of data, a common problem in wind turbine operation. The results demonstrate the potential of using these forecasts to support the decision making of the teams responsible for operating and maintaining wind farms. [ABSTRACT FROM AUTHOR]

Optimal power flow (OPF) is a crucial tool in the operation and planning of modern power systems. However, as power system optimization shifts towards larger-scale frameworks, and with the growing integration of distributed generations, the computational time and memory requirements of solving the alternating current (AC) OPF problems can increase exponentially with system size, posing computational challenges. In recent years, machine learning (ML) has demonstrated notable advantages in efficient computation and has been extensively applied to tackle OPF challenges. This paper presents five commonly employed OPF transformation techniques that leverage ML, offering a critical overview of the latest applications of advanced ML in solving OPF problems. The future directions in the application of machine learning to AC OPF are also discussed. [ABSTRACT FROM AUTHOR]

Distribution network scheduling (DNS) is the basis for distribution network management, which is computed in a periodical way via solving the formulated mixed-integer programming (MIP). To achieve the online scheduling, a provably robust learn-to-optimize approach for online DNS is proposed in this paper, whose key lies in the transformation of the MIP-based DNS into the simple linear program problem with a much faster solving time. It formulates the parametric DNS model to construct the offline training dataset and then proposes the provably robust learning approach to learn the integer variables of MIP. The proposed learning approach is adversarial to minor perturbation of input scenario. After training, the learning model can predict the integer variables to achieve online scheduling. Case study verifies the acceleration effectiveness for online DNS. [ABSTRACT FROM AUTHOR]

This present review explores the application of artificial intelligence (AI) methods in analysing the prediction of thermophysical properties of nanofluids. Nanofluids, colloidal solutions comprising nanoparticles dispersed in various base fluids, have received significant attention for their enhanced thermal properties and broad application in industries ranging from electronics cooling to renewable energy systems. In particular, nanofluids' complexity and non-linear behaviour necessitate advanced predictive models in heat transfer applications. The AI techniques, which include genetic algorithms (GAs) and machine learning (ML) methods, have emerged as powerful tools to address these challenges and offer novel alternatives to traditional mathematical and physical models. Artificial Neural Networks (ANNs) and other AI algorithms are highlighted for their capacity to process large datasets and identify intricate patterns, thereby proving effective in predicting nanofluid thermophysical properties (e.g., thermal conductivity and specific heat capacity). This review paper presents a comprehensive overview of various published studies devoted to the thermal behaviour of nanofluids, where AI methods (like ANNs, support vector regression (SVR), and genetic algorithms) are employed to enhance the accuracy of predictions of their thermophysical properties. The reviewed works conclusively demonstrate the superiority of AI models over the classical approaches, emphasizing the role of AI in advancing research for nanofluids used in heat transfer applications. [ABSTRACT FROM AUTHOR]

Fuel cell hybrid electric trucks have become a cutting-edge field in understanding urban traffic emissions due to their enormous potential in low-carbon areas. In order to improve the economy of fuel cell hybrid electric trucks and reduce the decline of fuel cell lifespan, this paper proposes a multi-objective energy management strategy that optimizes weight coefficients. On the basis of establishing a fuel cell battery hybrid system model, three modes of uniform speed, acceleration, and deceleration were identified through clustering analysis of vehicle speed. Reinforcement learning algorithms were used to learn the corresponding weights for different modes, which reduced the decline in fuel cell life while improving the economic efficiency. The simulation results indicate that, under the conditions of no load, half load, and full load, the truck only sacrificed 0.9–5.6%, 1.7–2.6%, and 1.2–1.6% SOC, saving 5.7–6.45%, 5.9–6.67%, and 6.1–6.67% in lifespan loss, and reducing hydrogen consumption by 3.0–7.1%, 2.8–4.4%, and 1.0–3.0%, respectively. [ABSTRACT FROM AUTHOR]

This study aims to forecast New York and Los Angeles gasoline spot prices on a daily frequency. The dataset includes gasoline prices and a big set of 128 other relevant variables spanning the period from 17 February 2004 to 26 March 2022. These variables were fed to three tree-based machine learning algorithms: decision trees, random forest, and XGBoost. Furthermore, a variable importance measure (VIM) technique was applied to identify and rank the most important explanatory variables. The optimal model, a trained random forest, achieves a mean absolute percent error (MAPE) in the out-of-sample of 3.23% for the New York and 3.78% for the Los Angeles gasoline spot prices. The first lag, AR (1), of gasoline is the most important variable in both markets; the top five variables are all energy-related. This paper can strengthen the understanding of price determinants and has the potential to inform strategic decisions and policy directions within the energy sector, making it a valuable asset for both industry practitioners and policymakers. [ABSTRACT FROM AUTHOR]

Building energy baseline models, particularly machine learning-based models, are a core aspect in the evaluation of building energy performance to identify inefficient energy consumption behavior. In smart city design, energy planners and decision makers require comprehensive information on energy consumption across diverse building types as well as comparisons between different types of buildings. However, there is no comprehensive study of baseline modeling across the main building types to help identify factors that influence the performance of different machine learning algorithms for baseline modeling. Therefore, the goal of this paper is to review and analyze energy consumption behavior and evaluate the prediction performance and interpretability of machine learning-based baseline modeling techniques across major building types. The results have shown that the Extreme Gradient Boosting Machine (XGBoost) model is the most accurate baseline modeling method for all building types. Time-related factors, especially the week of the year and the day of the week, have the most impact on energy consumption across all building types. This study is presented as a useful resource for smart city energy managers to help in choosing and setting up appropriate methodologies for better operational effectiveness and efficiencies when designing and planning smart energy systems. [ABSTRACT FROM AUTHOR]

In the era of burgeoning electric vehicle (EV) popularity, understanding the patterns of EV users' behavior is imperative. This paper examines the trends in household charging sessions' timing, duration, and energy consumption by analyzing real-world residential charging data. By leveraging the information collected from each session, a novel framework is introduced for the efficient, real-time prediction of important charging characteristics. Utilizing historical data and user-specific features, machine learning models are trained to predict the connection duration, charging duration, charging demand, and time until the next session. These models enhance the understanding of EV users' behavior and provide practical tools for optimizing the EV charging infrastructure and effectively managing the charging demand. As the transportation sector becomes increasingly electrified, this work aims to empower stakeholders with insights and reliable models, enabling them to anticipate the localized demand and contribute to the sustainable integration of electric vehicles into the grid. [ABSTRACT FROM AUTHOR]

The paper presents a novel approach for predicting battery energy consumption in electric city buses (e-buses) by means of a trip-based data-driven regression model. The model was parameterized based on the data collected by running a physical experimentally validated e-bus simulation model, and it consists of powertrain and heating, ventilation, and air conditioning (HVAC) system submodels. The main advantage of the proposed approach is its reliance on readily available trip-related data, such as travel distance, mean velocity, average passenger count, mean and standard deviation of road slope, and mean ambient temperature and solar irradiance, as opposed to the physical model, which requires high-sampling-rate driving cycle data. Additionally, the data-driven model is executed significantly faster than the physical model, thus making it suitable for large-scale city bus electrification planning or online energy consumption prediction applications. The data-driven model development began with applying feature selection techniques to identify the most relevant set of model inputs. Machine learning methods were then employed to achieve a model that effectively balances accuracy, simplicity, and interpretability. The validation results of the final eight-input quadratic-form e-bus model demonstrated its high precision and generalization, which was reflected in the R2 value of 0.981 when tested on unseen data. Owing to the trip-based, mean-value formulation, the model executed six orders of magnitude faster than the physical model. [ABSTRACT FROM AUTHOR]

Technological improvements are crucial for achieving decarbonisation targets and addressing the impacts of climate change in the built environment via mitigation and adaptation measures. Data-driven methods for building performance prediction are particularly important in this regard. Nevertheless, the deployment of these technologies faces challenges, particularly in the domains of artificial intelligence (AI) ethics, interpretability and explainability of machine learning (ML) algorithms. The challenges encountered in applications for the built environment are amplified, particularly when data-driven solutions need to be applied throughout all the stages of the building life cycle and to address problems from a socio-technical perspective, where human behaviour needs to be considered. This requires a consistent use of analytics to assess the performance of a building, ideally by employing a digital twin (DT) approach, which involves the creation of a digital counterpart of the building for continuous analysis and improvement. This paper presents an in-depth review of the critical connections between data-driven methods, AI ethics, interpretability and their implementation in the built environment, acknowledging the complex and interconnected nature of these topics. The review is organised into three distinct analytical levels: The first level explores key issues of the current research on the interpretability of machine learning methods. The second level considers the adoption of interpretable data-driven methods for building energy modelling and the problem of establishing a link with the third level, which examines physics-driven grey-box modelling techniques, in order to provide integrated modelling solutions. The review's findings highlight how the interpretability concept is relevant in multiple contexts pertaining to energy and the built environment and how some of the current knowledge gaps can be addressed by further research in the broad area of data-driven methods. [ABSTRACT FROM AUTHOR]

This paper introduces a frequency-domain false data injection attack called Frequency Spectrum Attack (FSA) and explores its effects on load forecasting and the energy management system (EMS) in a microgrid. The FSA analyzes time-series signals in the frequency domain to identify patterns in their frequency spectrum. It learns the distribution of dominant frequencies in a dataset of healthy signals. Subsequently, it manipulates the amplitudes of dominant frequencies within this healthy distribution, ensuring a stealthy attack against statistical analysis of the signal spectrum. We evaluated the performance of FSA on LSTM, a state-of-the-art network for load forecasting. The results show that FSA can triple the Mean Absolute Error (MAE) of predictions compared to the normal case and increase it by 70% compared to noise injection attacks. Furthermore, FSA indirectly enhances battery utilization in the EMS by 45%. We then proposed a detection method that combines statistical analysis and machine-learning-based classification techniques with features. The model effectively distinguishes FSA from healthy and noisy signals, achieving an accuracy of 98.7% and an F1-score of 98.1% on a load dataset, covering healthy, FSA, and noisy load data. Finally, a countermeasure was introduced based on the statistical analysis of the frequency spectrum of healthy signals to mitigate the impact of FSA. This countermeasure successfully reduces the MAE of the attacked model from 0.135 to 0.053, validating its effectiveness in mitigating FSA. [ABSTRACT FROM AUTHOR]

Accurate instantaneous electricity peak load prediction is crucial for efficient capacity planning and cost-effective electricity network establishment. This paper aims to enhance the accuracy of instantaneous peak load forecasting by employing models incorporating various optimization and machine learning (ML) methods. This study examines the impact of independent inputs on peak load estimation through various combinations and subsets using multilinear regression (MLR) equations. This research utilizes input data from 1980 to 2020, including import and export data, population, and gross domestic product (GDP), to forecast the instantaneous electricity peak load as the output value. The effectiveness of these techniques is evaluated based on error metrics, including mean absolute error (MAE), mean square error (MSE), mean absolute percentage error (MAPE), root mean square error (RMSE), and R2. The comparison extends to popular optimization methods, such as particle swarm optimization (PSO), and the newest method in the field, including dandelion optimizer (DO) and gold rush optimizer (GRO). This comparison is made against conventional machine learning methods, such as support vector regression (SVR) and artificial neural network (ANN), in terms of their prediction accuracy. The findings indicate that the ANN and GRO approaches produce the least statistical errors. Furthermore, the correlation matrix indicates a robust positive linear correlation between GDP and instantaneous peak load. The proposed model demonstrates strong predictive capabilities for estimating peak load, with ANN and GRO performing exceptionally well compared to other methods. [ABSTRACT FROM AUTHOR]

This paper presents innovative machine-learning solutions to enhance energy efficiency in electrical tomography for industrial reactors. Addressing the key challenge of optimizing the neural model's loss function, a classifier tailored to precisely recommend optimal loss functions based on the measurement data is designed. This classifier recommends which model, equipped with given loss functions, should be used to ensure the best reconstruction quality. The novelty of this study lies in the optimal adjustment of the loss function to a specific measurement vector, which allows for better reconstructions than that by traditional models trained based on a constant loss function. This study presents a methodology enabling the development of an optimal loss function classifier to determine the optimal model and loss function for specific datasets. The approach eliminates the randomness inherent in traditional methods, leading to more accurate and reliable reconstructions. In order to achieve the set goal, four models based on a simple LSTM network structure were first trained, each connected with various loss functions: HMSE (half mean squared error), Huber, l1loss (L1 loss for regression tasks—mean absolute error), and l2loss (L2 loss for regression tasks—mean squared error). The best classifier training results were obtained for support vector machines. The quality of the obtained reconstructions was evaluated using three image quality indicators: PSNR, ICC, and MSE. When applied to simulated cases and real measurements from the Netrix S.A. laboratory, the classifier demonstrated effective performance, consistently recommending models that produced reconstructions that closely resembled the real objects. Such a classifier can significantly optimize the use of EIT in industrial reactors by increasing the accuracy and efficiency of imaging, resulting in improved energy management and efficiency. [ABSTRACT FROM AUTHOR]

Photovoltaic (PV) power generation forecasting is an important research topic, aiming to mitigate variability caused by weather conditions and improve power generation planning. Climate factors, including solar irradiance, temperature, and cloud cover, influence the energy conversion achieved by PV systems. Long-term weather forecasting improves PV power generation planning, while short-term forecasting enhances control methods, such as managing ramp rates. The stochastic nature of weather variables poses a challenge for linear regression methods. Consequently, advanced, state-of-the-art machine learning (ML) approaches capable of handling non-linear data, such as long short-term memory (LSTM), have emerged. This paper introduces the implementation of a multivariate machine learning model to forecast PV power generation, considering multiple weather variables. A deep learning solution was implemented to analyze weather variables in a short time horizon. Utilizing a hidden Markov model for data preprocessing, an LSTM model was trained using the Alice Spring dataset provided by DKA Solar Center. The proposed workflow demonstrated superior performance compared to the results obtained by state-of-the-art methods, including support vector machine, radiation classification coordinate with LSTM (RCC-LSTM), and ESNCNN specifically concerning the proposed multi-input single-output LSTM model. This improvement is attributed to incorporating input features such as active power, temperature, humidity, horizontal and diffuse irradiance, and wind direction, with active power serving as the output variable. The proposed workflow achieved a mean square error (MSE) of 2.17 × 10 − 7 , a root mean square error (RMSE) of 4.65 × 10 − 4 , and a mean absolute error (MAE) of 4.04 × 10 − 4 . [ABSTRACT FROM AUTHOR]

Energy management systems (EMSs) are regarded as essential components within smart grids. In pursuit of efficiency, reliability, stability, and sustainability, an integrated EMS empowered by machine learning (ML) has been addressed as a promising solution. A comprehensive review of current literature and trends has been conducted with a focus on key areas, such as distributed energy resources, energy management information systems, energy storage systems, energy trading risk management systems, demand-side management systems, grid automation, and self-healing systems. The application of ML in EMS is discussed, highlighting enhancements in data analytics, improvements in system stability, facilitation of efficient energy distribution and optimization of energy flow. Moreover, architectural frameworks, operational constraints, and challenging issues in ML-based EMS are explored by focusing on its effectiveness, efficiency, and suitability. This paper is intended to provide valuable insights into the future of EMS. [ABSTRACT FROM AUTHOR]

Increasing building energy consumption has led to environmental and economic issues. Energy demand prediction (DP) aims to reduce energy use. Machine learning (ML) methods have been used to improve building energy consumption, but not all have performed well in terms of accuracy and efficiency. In this paper, these methods are examined and evaluated for modern building (MB) DP. [ABSTRACT FROM AUTHOR]

Integrating renewable energy sources (RES), such as photovoltaic (PV) systems, into power system networks increases uncertainty, leading to practical challenges. Therefore, an accurate photovoltaic (PV) power prediction model is required to provide essential data that supports smooth power system operation. Hence, the work presented in this paper compares and discusses the results of different machine learning (ML) techniques in predicting the power produced by the 300 MW Sakaka PV Power Plant in the north of Saudi Arabia. The validation of the presented work is performed using real-world operational data obtained from the specified solar farm. Several performance measures, including accuracy, precision, recall, F1 Score, and mean square error (MSE), are used in this work to evaluate the performance of the different ML approaches and determine the most precise prediction model. The obtained results show that the Support Vector Machine (SVM) with a Radial basis function (RBF) is the most effective approach for optimizing solar power prediction in large-scale solar farms. [ABSTRACT FROM AUTHOR]

Within the past few decades, thousands of experiments have been performed to characterize urban waste and biomass to estimate their bioenergy potential and product identification. There is a need to develop an integrated process model based on the experimental literature, as well as simulations to obtain suitable products. In this study, municipal solid waste (MSW), including paper and plastic characterization and an integrated process model, were developed to optimize the final products in a reactor system. The process model has two modes, R&D and reactor control (RC), to obtain suitable products including bio-oil, char, and gases. A database was integrated based on thermokinetics, machine learning, and simulation models to optimize product efficiency. The experimental data include those obtained by thermogravimetric analysis and Fourier-transform infrared spectroscopy, which were linked to a pyrolysis experimental setup. Feedstock product mapping models were incorporated into the database along with the temperature, heating rates, elemental analysis, and final product concentration, which were utilized for the pyrolysis reactor setup. Product feasibility was conducted based on life cycle cost, affordability, and product efficiency. The present work will bridge the gap between experimental studies and decision-making based on obtained products under several experimental conditions around the world. [ABSTRACT FROM AUTHOR]

The use of renewable energy sources is becoming increasingly widespread around the world due to various factors, the most relevant of which is the high environmental friendliness of these types of energy resources. However, the large-scale involvement of green energy leads to the creation of distributed energy networks that combine several different generation methods, each of which has its own specific features, and as a result, the data collection and processing necessary to optimize the operation of such energy systems become more relevant. Development of new technologies for the more optimal use of RES is one of the main tasks of modern research in the field of energy, where an important place is assigned to the use of technologies based on artificial intelligence, allowing researchers to significantly increase the efficiency of the use of all types of RES within energy systems. This paper proposes to consider the methodology of application of modern approaches to the assessment of the amount of energy obtained from renewable energy sources based on artificial intelligence technologies, approaches used for data processing and for optimization of the control processes for operating energy systems with the integration of renewable energy sources. The relevance of the work lies in the formation of a general approach applied to the evaluation of renewable energy sources such as solar and wind energy based on the use of artificial intelligence technologies. As a verification of the approach considered by the authors, a number of models for predicting the amount of solar power generation using photovoltaic panels have been implemented, for which modern machine-learning methods have been used. As a result of testing for quality and accuracy, the best results were obtained using a hybrid forecasting model, which combines the joint use of a random forest model applied at the stage of the normalization of the input data, exponential smoothing model, and LSTM model. [ABSTRACT FROM AUTHOR]

This study focuses on using machine learning techniques to accurately predict the generated power in a two-stage back-pressure steam turbine used in the paper production industry. In order to accurately predict power production by a steam turbine, it is crucial to consider the time dependence of the input data. For this purpose, the long-short-term memory (LSTM) approach is employed. Correlation analysis is performed to select parameters with a correlation coefficient greater than 0.8. Initially, nine inputs are considered, and the study showcases the superior performance of the LSTM method, with an accuracy rate of 0.47. Further refinement is conducted by reducing the inputs to four based on correlation analysis, resulting in an improved accuracy rate of 0.39. The comparison between the LSTM method and the Willans line model evaluates the efficacy of the former in predicting production power. The root mean square error (RMSE) evaluation parameter is used to assess the accuracy of the prediction algorithm used for the generator's production power. By highlighting the importance of selecting appropriate machine learning techniques, high-quality input data, and utilising correlation analysis for input refinement, this work demonstrates a valuable approach to accurately estimating and predicting power production in the energy industry. [ABSTRACT FROM AUTHOR]

This paper presents a methodology for static security assessment of transmission network planning using machine learning (ML). The objective is to accelerate the probabilistic risk assessment of the Hydro-Quebec (HQ) TransÉnergie transmission grid. The model takes the expected power supply and the status of the elements in a N − k contingency scenario as inputs. The output is the reliability metric Expecting Load Shedding Cost ( E L S C ). To train and test the regression model, stochastic data are performed, resulting in a set of N − k and k = 1 , 2 , 3 contingency scenarios used as inputs. Subsequently, the output is computed for each scenario by performing load shedding using an optimal power flow algorithm, with the objective function of minimizing E L S C . Experimental results on the well-known IEEE-39 bus test system and PEGASE-1354 system demonstrate the potential of the proposed methodology in generalizing E L S C during an N − k contingency. For up to k = 3 the coefficient of determination R 2 obtained was close to 98% for both case studies, achieving a speed-up of over four orders of magnitude with the use of a Multilayer Perceptron ( M L P ). This approach and its results have not been addressed in the literature, making this methodology a contribution to the state of the art. [ABSTRACT FROM AUTHOR]

Battery aging is a complex phenomenon, and precise state of health (SoH) monitoring is essential for effective battery management. This paper presents a data-driven method for SoH estimation based on support vector regression (SVR), utilizing features built from both full and partial discharge capacity curves, as well as battery temperature data. It provides an in-depth discussion of the novel features constructed from different voltage intervals. Moreover, three combinations of features were analyzed, demonstrating how their efficacy changes across different voltage ranges. Successful results were obtained using the full discharge capacity curves, built from the full interval of 2 to 3.4 V and achieving a mean R2 value of 0.962 for the test set, thus showcasing the adequacy of the selected SVR strategy. Finally, the features constructed from the full voltage range were compared with ones built from 10 small voltage ranges. Similar success was observed, evidenced by a mean R2 value ranging between 0.939 and 0.973 across different voltage ranges. This indicates the practical applicability of the developed models in real-world scenarios. The tuning and evaluation of the proposed models were carried out using a substantial dataset created by Toyota, consisting of 124 lithium iron phosphate batteries. [ABSTRACT FROM AUTHOR]