Search

The integration of distributed generation (DG) into a power distribution network allows the establishment of a microgrid (MG) system when the main grid experiences a malfunction or is undergoing maintenance. In this case, the power-generating capacity of distributed generators may be less than the load demand. This study presents a strategy for the effective utilization of deployed active and reactive power sources under power mismatch conditions in the islanded distribution networks. Initially, the DGs' and capacitors' optimal placement and capacity were identified using the Jaya algorithm (JA) with the aim to reduce power losses in the grid-connected mode. Later, the DG and capacitor combination's optimal power factor was determined to withstand the islanded distribution network's highest possible power demand in the event of a power mismatch. To assess the optimal value of the DG–capacitor pair's operating power factor ( p f s o u r c e ) for the islanded operation, an analytical approach has been proposed that determines the best trade-off between power losses and the under-utilization of accessible generation. The test results on 33-bus and 69-bus IEEE distribution networks demonstrate that holding the islanded network's load power factor ( p f l o a d ) equal to p f s o u r c e during the power imbalance conditions allows the installed distributed sources to effectively operate at full capacity. As expected, the proposed strategy will assist the utility companies in designing efficient energy management or load shedding schemes to effectively cope with the power mismatch conditions. [ABSTRACT FROM AUTHOR]

This paper reviews the optimization strategies for the optimal simultaneous allocation of distributed generation (DG) and shunts capacitor banks (SCBs) in electrical distribution networks. These optimization strategies aim to determine the optimal size, location, and combination of DGs and SCBs to constitute a techno-economic system while satisfying the constraints and energy demand of the load. The optimization strategies explicitly reviewed include the problem formulations, optimization techniques, restrictions posed for optimization problems, decision variables, and network operating modes typically assumed while allocating the DGs and SCBs. In addition, there is an attempt to highlight the limitations of the existing literature and future research directions. This study undertakes a comprehensive review of the literature that systematically considers the simultaneous application of DGs and SCBs to advance the existing literature, which lacks such a review. Expectedly, this review will serve as a principle platform for researchers intending to explore the subject area for further improvement. [ABSTRACT FROM AUTHOR]

For over a decade, distributed generations (DGs) have sufficiently convinced the researchers that they are the economic and environment-friendly solution that can be integrated with the centralized generations. The optimal planning of distributed generations requires the appropriate location and sizing and their corresponding control with various power network types to obtain the best of the technical, economical, commercial, and regulatory objectives. Most of these objectives are conflicting in nature and require multi-objective solutions. Therefore, this paper brings a comprehensive literature review and a critical analysis of the state of the art of the optimal multi-objective planning of DG installation in the power network with different objective functions and their constraints. The paper considers the adoption of optimization techniques for distributed generation planning in radial distribution systems from different power system performance viewpoints; it considers the use of different DG types, distribution models, DG variables, and mathematical formulations; and it considers the participation of different countries in the stated DG placement and sizing problem. Moreover, the summary of the literature review and critical analysis of this article helps the researchers and engineers to explore the research gap and to find the future recommendations for the robust optimal planning of the DGs working with various objectives and algorithms. The paper considers the adoption of uncertainties on the load and generation side, the introduction of DGs with energy storage backups, and the testing of DG placement and sizing on large and complex distribution networks. [ABSTRACT FROM AUTHOR]

In recent years, renewable types of distributed generation in the distribution system have been much appreciated due to their enormous technical and environmental advantages. This paper proposes a methodology for optimal placement and sizing of renewable distributed generation(s) (i.e., wind, solar and biomass) and capacitor banks into a radial distribution system. The intermittency of wind speed and solar irradiance are handled with multi-state modeling using suitable probability distribution functions. The three objective functions, i.e., power loss reduction, voltage stability improvement, and voltage deviation minimization are optimized using advanced Pareto-front non-dominated sorting multi-objective particle swarm optimization method. First a set of non-dominated Pareto-front data are called from the algorithm. Later, a fuzzy decision technique is applied to extract the trade-off solution set. The effectiveness of the proposed methodology is tested on the standard IEEE 33 test system. The overall results reveal that combination of renewable distributed generations and capacitor banks are dominant in power loss reduction, voltage stability and voltage profile improvement. [ABSTRACT FROM AUTHOR]