Search

On the basis of "Carbon Peak and Carbon Neutral" goals, carbon sequestration projects are increasing in China. The integrity of cement sheaths, as an important factor affecting carbon sequestration projects, has also received more attention and research. When CO2 is injected into the subsurface from sequestration wells, the cement sheath may mechanically fail due to the pressure accumulated inside the casing, which leads to the sealing of the cement sheath failing. The elasticity and strength parameters of the cement sheath are considered in this paper. The critical bottom-hole injection pressures of inclined well sections under anisotropic formation stresses at different depths were calculated for actual carbon-sealing wells in the X block—the CO2 sequestration target block. The sensitivity factors of the critical bottom-hole injection pressure were also analyzed. It was found that the cement sheath damage criterion was tensile damage. The Young's modulus and tensile strength of the cement sheath are the main factors affecting the mechanical failure of the cement sheath, with Poisson's ratio having the second highest influence. An increase in the Young's modulus, Poisson's ratio, and tensile strength of the cement sheath can help to improve the mechanical stability of cement sheaths in CO2 sequestration wells. This model can be used for the design and evaluation of cement in carbon sequestration wells. [ABSTRACT FROM AUTHOR]

With a significant share of renewable power generation integrated into the power supply, it is crucial to timely adjust the regulating peak load for coal-fired power plants equipped with CO2 capture to ensure the stable operation of the multi-energy supply system. In this paper, the effects of varying boiler loads on the techno-economic performance of the retrofitted power plant were studied. Furthermore, the potential for reducing the cost of CO2 capture was investigated, and early opportunities for demonstration were discussed. Results showed that when the boiler load decreased from 100% turbine heat acceptance condition to 50% turbine heat acceptance condition, the cost of CO2 capture increased from 37.0 $/t CO2 to 57.0 $/t CO2, cost contribution of energy penalty and extra capital investment also increased from 20.6 $/t-CO2 to 25.7 $/t-CO2, and from 16.4 $/t-CO2 to 31.3 $/t-CO2, respectively. Furthermore, by improving separation efficiency from 0.15 to 0.5, a 25% to 30% reduction in CO2 capture cost can be achieved. The cost of CO2 capture could decrease by 42.2–50.5% when the cumulative capacity reaches 250 GW under the high investment learning rate scenario. According to the distribution of coal prices and renewable energy sources in China, the early demonstration projects of multi-energy supply systems should prioritize the northern region. The results of this work can provide informative references for making roadmaps and policies for CO2 emission reduction toward carbon neutrality. [ABSTRACT FROM AUTHOR]

The research and application of CO2 storage and enhanced oil recovery (EOR) have gradually emerged in China. However, the vast unconventional oil and gas resources are stored in reservoir pores ranging from several nanometers to several hundred micrometers in size. Additionally, CO2 geological sequestration involves the migration of fluids in tight caprock and target layers, which directly alters the transport and phase behavior of reservoir fluids at different scales. Micro- and nanoscale fluidics technology, with their advantages of in situ visualization, high temperature and pressure resistance, and rapid response, have become a new technical approach to investigate gas–liquid interactions in confined domains and an effective supplement to traditional core displacement experiments. The research progress of micro–nano fluidics visualization technology in various aspects, such as CO2 capture, utilization, and storage, is summarized in this paper, and the future development trends and research directions of micro–nano fluidics technology in the field of carbon capture, utilization, and storage (CCUS) are predicted. [ABSTRACT FROM AUTHOR]

As the largest carbon emitter in China's manufacturing sector, the low-carbon transition of the steel industry is urgent. CO2 capture, utilization, and storage (CCUS) technology is one of the effective measures to reduce carbon emissions in steel industry. In this paper, a comprehensive assessment model of source–sink matching-levelized cost in China's steel industry is constructed to evaluate the potential, economy, and spatial distribution of CCUS retrofits of blast furnaces in the BF-BOF steel industry. The results show that, if no extra incentive policy is included, the levelized cost of carbon dioxide (LCOCD) of 111 steel plants with a 420.07 Mt/a CO2 abatement potential ranges from −134.87 to 142.95 USD/t. The levelized cost of crude steel (LCOS) range of steel plants after the CCUS retrofits of blast furnaces is 341.81 to 541.41 USD/t. The incentives such as carbon market and government subsidies will all contribute to the early deployment of CCUS projects. The CCUS technology could be prioritized for deployment in North China, Northwest China, and East China's Shandong Province, but more powerful incentives are still needed for current large-scale deployment. The research results can provide references for the early deployment and policy formulation of CCUS in China's steel industry. [ABSTRACT FROM AUTHOR]

Enhancing carbon emission mitigation and carbon utilization have become necessary for the world to respond to climate change caused by the increase of greenhouse gas concentrations. As a result, carbon capture, utilization, and storage (CCUS) technologies have attracted considerable attention worldwide, especially in China, which plans to achieve a carbon peak before 2030 and carbon neutrality before 2060. This paper proposed six priorities for China, the current world's largest carbon emitter, to achieve its dual carbon strategy in the green energy transition process. We analyzed and summarized the challenges and potentialities of conventional carbon utilization (CU), carbon capture utilization (CCU), and CCUS. Based on the current development trend, carbon dioxide capture, circular utilization, and storage (CCCUS) technology that integrates carbon circular utilization and partial sequestration, with large-scale underground energy storage were proposed, namely biomethanation. Technically and economically, biomethanation was believed to have an essential contribution to China's renewable energy utilization and storage, as well as the carbon circular economy. The preliminary investigation reveals significant potential, with a corresponding carbon storage capacity of 5.94 × 108 t~7.98 × 108 t and energy storage of 3.29 × 1012 kWh~4.42 × 1012 kWh. Therefore, we believe that in addition to vigorously developing classical CCUS technology, technical research and pilot projects of CCCUS technology that combined large-scale underground energy storage also need to be carried out to complete the technical reserve and the dual-carbon target. [ABSTRACT FROM AUTHOR]

This perspective paper elaborates on how the burden of environmental issues on public health and the economy led China's government to declare its revised environmental policies or "war on pollution". It explains the importance of photovoltaic solar (PV), electric vehicles (EV), and carbon capture and storage (CCS) in helping China to mitigate its environmental concerns while maintaining economic growth. China already leads PV solar and EV manufacturing; however, it has not made a tangible contribution to CCS technology yet. On the other hand, CCS is far behind its envisaged role in contributing to the reduction of greenhouse gas emissions and supporting countries to meet their net carbon zero targets. China's existing coal power plants are good candidates to be retrofitted with CCS. Similar to PV and EV technologies, China could influence this technology globally, by reducing the uncertainties, demonstrating the viability, and driving the costs lower. China's revised policies have been effective and shown global impacts, but their implementations remain as strong as the political will behind them. [ABSTRACT FROM AUTHOR]

Hydrogen (H2) is considered one of the main pillars for transforming the conventional "dark" energy system to a net-zero carbon or "green" energy system. This work reviewed the potential resources for producing low-carbon hydrogen in China, as well as the possible hydrogen production methods based on the available resources. The analysis and comparison of the levelized cost of hydrogen (LCOH) for different hydrogen production pathways, and the optimal technology mixes to produce H2 in China from 2020 to 2050 were obtained using the mixed-integer linear programming (MILP) optimization model. The results were concluded as three major ones: (a) By 2050, the LCOH of solar- and onshore-wind-powered hydrogen will reach around 70–80 $/MWh, which is lower than the current H2 price and the future low-carbon H2 price. (b) Fuel costs (>40%) and capital investments (~20%) of different hydrogen technologies are the major cost components, and also are the major direction to further reduce the hydrogen price. (c) For the optimal hydrogen technology mix under the higher renewable ratio (70%) in 2050, the installed capacities of the renewable-powered electrolysers are all more than 200 GW, and the overall LCOH is 68.46 $/MWh. This value is higher than the LCOH (62.95 $/MWh) of the scenario with higher coal gasification with carbon capture and the storage (CG-CCS) ratio (>50%). Overall, this work is the first time that hydrogen production methods in China has been discussed comprehensively, as well as the acquisition of the optimal H2 production technology mix by the MILP optimization model, which can provide guidance on future hydrogen development pathways and technology development potential in China. [ABSTRACT FROM AUTHOR]

There is a global move toward being "carbon neutral". Reducing the use of coal to generate power has become an inevitable choice for many countries when transforming their energy structures. Many countries have proposed phasing out coal. China is a major energy producing and consuming country and intends to reach a carbon peak by 2030 and become carbon neutral by 2060. China has repeatedly emphasized coal reduction, but has not explicitly proposed phasing out coal, due to the influence of local governments, coal-related enterprises, and the public. This paper explores whether China could declare a "coal phase-out", and the possible reasons for doing so, by constructing an evolutionary game model with two correlations. MATLAB was used to simulate the model results to determine the effectiveness of the fractal results of the model, and the entropy method was used to calculate the development level of "coal phase-out" related indicators in China and Germany. The results show that: (1) The government can phase out coal only when coal-related enterprises and the public can benefit from reducing coal production and consumption. In addition, these benefits are needed to ensure stable economic and social development without affecting people's daily lives; (2) The development level of relevant indicators of "coal retreat" in China is lower than that in Germany. Based on these results, it is concluded that it is difficult for China to announce a "coal phase-out" at present. Faced with this reality, China should improve the efficiency of coal use, install carbon capture and storage facilities, vigorously develop renewable energy and reduce the share of coal in the energy system. [ABSTRACT FROM AUTHOR]

To achieve carbon neutrality and improve emission reduction efficiency, capturing carbon dioxide from the air on a large scale and promoting the application and innovation of carbon capture technology (CCUS) are the most important goals. This study undertakes an annual and comprehensive evaluation of the policy and the technological innovation efficiency (TIE) of 10 listed companies in China using the DEA model and the Malmquist index analysis method. The number of relevant laws and policies is significant, but they are not well coordinated. The static evaluation results indicate that the complete factor production rate is low, generally lower than 0.9, and the technical innovation efficiency is weak, mainly because of technological backwardness. The dynamic evaluation results indicate that the changes in total factor productivity (TFP) each year are primarily affected by changes in technological progress. This suggests that most domestic enterprises are still exploring technological innovation (TI) and operational business models. Finally, this study proposes measures to improve the TIE of carbon capture technology enterprises in China, including giving full play to the role of the government, expanding effective investment, and improving innovational ability. [ABSTRACT FROM AUTHOR]

China hosts over half of global coal-fired power generation capacity and has the world's largest coal reserves. Its 2060 carbon neutrality goal will require coal-fired electricity generation to shrink dramatically, with or without carbon capture and storage technology. Two macroeconomic areas in which the socioeconomic impact of this decline is felt are losses in jobs and tax revenues supported by thermal coal mining, transport and power generation. At the national level, under a 'baseline' (B) scenario consistent with China's carbon neutrality goal, labour productivity growth in coal mining implies that significant job losses will occur nationally in the medium term, even if all coal plants continue operating as planned. Jobs supported by the coal power industry would decline from an estimated 2.7 million in 2021, to 1.44 million in 2035 and 94,000 in 2050, with jobs losses from mining alone expected to exceed 1.1 million by 2035. Tax revenues from thermal coal would total approximately CNY 300 billion annually from 2021–2030, peaking in 2023 at CNY 340 billion. This is significantly less than estimated subsidies of at least CNY 480 billion, suggesting coal is likely a net fiscal drain on China's public finances, even without accounting for the costs of local pollution and the social cost of carbon. As coal plant retirements accelerate, from 2034 onwards, fiscal revenues begin to fall more rapidly, with rates of decline rising from 1% in the 2020s to over 10% a year by the 2040s. More aggressive climate policy and technology scenarios bring job and tax losses forward in time, while a No Transition policy, in which all currently planned coal plants are built, delays but does not ultimately prevent these losses. At the provincial level, China's major coal-producing provinces will likely face challenges in managing the localised effects of expected job losses and finding productive alternative uses for this labour. Governments of coal-producing provinces like Inner Mongolia, with an industry highly dependent on exports to other provinces, are more exposed than others to declining tax revenues from coal, and more insulated from job losses, given their high current degree of labour efficiency. Although their provincial revenues are likely to remain stable until the early 2030s under the B scenario, the possibility of increasing policy stringency underlines the need for revenue and skill base diversification. At the firm level, China's 'Big Five' state-owned power companies were responsible for over 40% of both jobs and tax revenues in 2021. The number of jobs supported by the activities of each of the largest ten firms, with one exception, will decline by 71–84% by the early 2040s, with the tax contribution of each declining by 43–69% in the same period. [ABSTRACT FROM AUTHOR]