Search

Fruit and vegetable processing comes 6th in terms of energy consumption in the agri-food industry. At the same time, 88.4% of the industry's final energy consumption structure is thermal energy, which depends heavily on electricity consumption. In addition, fruit and vegetable processing has a significant impact on the environment due to consumption of significant amounts of water. Reducing these three indicators simultaneously would increase the efficiency of the process while improving environmental protection. This paper proposes neural models of thermal energy, electricity and water consumption for selected major fruit- and vegetable-processing plants in Poland. These models were the basis for formulating a multi-criteria optimization task. Optimization of thermal energy, electricity and water consumption was carried out using genetic algorithms. The optimization results in the sense of Pareto can be the basis for the use of sustainable technology in selected fruit- and vegetable-processing plants. [ABSTRACT FROM AUTHOR]

In the face of ongoing climate changes and the current geopolitical situation, Renewable Energy Sources (RES) are continuously gaining popularity in many countries. Objectives related to environmental protection and the use of RES set by different countries all over the world, as well as by the European Union (EU), are becoming priorities for many. The increase in the installed capacity of photovoltaic systems has been growing steadily for several years, leading to the creation of new systems accompanying PV installations; this phenomenon has also been observed in Poland. This paper presents a photovoltaic system in the form of a bicycle shed next to a school building as an example of building-integrated photovoltaics (BIPV) without connection to the power grid. It was shown that the energy consumption profile should be properly correlated with the production profile, otherwise significant losses occur. Alternative methods to improve the correlation of production and energy consumption by using SCADA systems or building automation to properly manage the electricity generation and consumption installation were also proposed. Furthermore, it was shown that adopting a fixed discount rate in financial analyses can distort the picture of real profits. An analysis of the changes in the NPV ratio using variable discount rates was carried out when analyzing the entire life of the solar plant. [ABSTRACT FROM AUTHOR]

The analyses presented in the publication allowed, on the basis of the data collected, development of an econometric model for the Polish steel industry from the point of view of the relationship between heat and energy management in the steel production process. The developed model is the main novelty of the paper. The main objective of the study was to develop an econometric model of Poland's heat and energy economy. The following research questions were raised: Is there an econometric model describing heat consumption (intensity) in the steel industry in Poland in relation to steel production and the energy economy? What are the relations between heat intensity and energy prices and steel production in Poland? How might the current energy crisis affect steel production? In the analysis we used data of energy and heat management in the Polish steel industry. An econometric model was developed of the dependence of heat consumption (Yt) on electricity prices (X1t) and steel production (X2t) in Poland. The authors took advantage of open access to data. Annual volumes of heat consumption in steel production processes in Poland were analysed as a function of the annual volume of steel production and the prices of electricity, which are consumed in technological processes in steel mills. We analyzed data for years 2004–2020. The analyses carried out showed that there is an inversely proportional relationship between electricity prices and the intensity of heat consumption by the steel industry. Research shows that rising energy prices lead to lower steel production. This is a dangerous phenomenon for the steel industry in the context of the current energy crisis caused by the pandemic and war in Ukraine. We think that the significance of our results is connected with the fact that the developed model is a useful analytical tool, as it not only allows the analysis of historical data, but can also be used to predict how steel industry parameters will change in the future under the influence of changes in external factors, such as energy prices. This gives a wide range of analytical possibilities for the use of the model. [ABSTRACT FROM AUTHOR]

This paper analyzes the changes in carbon dioxide (CO2) emissions related to energy consumption in the Polish agricultural sector between 2000 and 2019. Based on the Logarithmic Mean Divisia Index (LMDI), the changes in agricultural CO2 emissions are viewed in the context of changes in six factors, i.e., CO2 emission intensity, substitution of fossil fuels, penetration of renewable energies, energy intensity, labor productivity and number of employees. The analysis demonstrated that total energy consumption declined over the study period; this was related to a reduction in the intake of energy derived from solid fossil fuels (−1.05%), crude oil (−1.01%), electricity (−4.89%), and heat (−1.37%), and to an increased consumption of natural gas (5.78%) and biofuels (0.82%). Furthermore, it follows from the analysis that changes in CO2 emissions witnessed in that period were consistent with changes in energy consumption levels; this resulted from a negligible transformation of the energy mix (largely determined by fossil fuels). Generally, CO2 emissions declined over the study period at a rate comparable (−0.9%) to that of the reduction in energy consumption (−1.03%). In light of the LMDI method, the reduction in CO2 emissions from fuel consumption in the Polish agricultural sector was mainly driven by a reduction in energy intensity and in employment. Conversely, rapid growth in labor productivity was the key factor in increasing carbon dioxide emissions. Compared to these impacts, changes in other factors (i.e., emission intensity, energy mix and penetration of renewable energies) had an extremely small or marginal effect on the variation in CO2 emissions. [ABSTRACT FROM AUTHOR]

In this article, we aim to identify the determinants that profoundly impact renewable energy sources development in Poland. To this end, the authors have conducted qualitative and quantitative analyses of Poland's renewable energy sector. In this paper, we demonstrate an original approach considering the different development levels of the given sector across provinces (voivodeships). It uses panel data from the Local Data Bank of the Statistics Poland on electricity production from renewable energy sources in individual voivodeships in Poland from 2005 through 2019. The study confronts the results of previous studies and sheds light on the situation in Poland—specifically, upon the changes that have happened over the ten years (2010–2019). The qualitative analysis shows a negative correlation between energy consumption and the share of renewable energy sources in total energy production. Evidence shows that favorable changes are underway in the energy production structure: RES share is growing and by degrees satisfying energy demand, and there is growing potential of energy entities in Poland. Furthermore, the analysis shows that R&D and total expenditures on environmental protection and water management investments do not significantly affect the development of RES. A dynamic panel data model has been used to analyze the group and time effects on the dependent variable. The findings confirm the existence of the persistency effect and indicate positive effects of total installed electric capacity (IEC) and household electricity consumption (HEC). Nonhousehold electricity consumption (NHEC) has a negative effect on the endogenous variable, i.e., the renewable energy sources share in the gross final energy consumption (RESS). The research results may be applicable as recommendations for energy efficiency policy development based on renewable energy sources depending on the RES development level in the regions of Poland. [ABSTRACT FROM AUTHOR]

The COVID-19 pandemic has caused changes in electricity demand and, consequently, electricity consumption profiles. Given the rapid changes in energy prices, it is significant from the perspective of energy companies, and forecasting consumed energy volume. A necessity for accurate energy volume planning forces the need for analyzing consumers' behaviors during the pandemic, especially under lockdowns, to prepare for the possibility of another pandemic wave. Many business clients analyzed in the paper are economic entities functioning in sectors under restrictions. That is why analyzing the pandemic's impact on the change in energy consumption profiles and volume of these entities is particularly meaningful. The article analyzes the pandemic and restrictions' impact on the total change of energy consumption volume and demand profiles. The analysis was conducted basing on data collected from a Polish energy trading and sales company. It focused on the energy consumption of its corporate clients. Analyzed data included aggregated energy consumption volumes for all company's customers and key groups of economic entities under restrictions. The analysis demonstrates the influence of pandemic restrictions on energy consumption in the group of business clients. Significant differences are observable among various sectors of the economy. The research proves that the largest drops in energy consumption are related to shopping centers and offices. Altogether, the restrictions have caused a 15–23% energy consumption drop during the first lockdown and a maximum 11% during the second against expected values. [ABSTRACT FROM AUTHOR]

A substantial share of the building sector in global energy demand has attracted scholars to focus on the energy efficiency of the building sector. The building's energy consumption has been projected to increase due to mass urbanization, high living comfort standards, and, more importantly, climate change. While climate change has potential impacts on the rate of energy consumption in buildings, several studies have shown that these impacts differ from one region to another. In response, this paper aimed to investigate the impact of climate change on the heating and cooling energy demands of buildings as influential variables in building energy consumption in the city of Poznan, Poland. In this sense, through the statistical downscaling method and considering the most recent Typical Meteorological Year (2004–2018) as the baseline, the future weather data for 2050 and 2080 of the city of Poznan were produced according to the HadCM3 and A2 GHG scenario. These generated files were then used to simulate the energy demands in 16 building prototypes of the ASHRAE 90.1 standard. The results indicate an average increase in cooling load and a decrease in heating load at 135% and 40%, respectively, by 2080. Due to the higher share of heating load, the total thermal load of the buildings decreased within the study period. Therefore, while the total thermal load is currently under the decrease, to avoid its rise in the future, serious measures should be taken to control the increased cooling demand and, consequently, thermal load and GHG emissions. [ABSTRACT FROM AUTHOR]