Search

Before the COVID-19 pandemic, ventilation in buildings was not always given its due importance. The World Health Organization has highlighted the important role of air exchange with the outdoors in improving the air quality in buildings; buildings should, therefore, be equipped with mechanical ventilation or adequate air conditioning systems. This paper aims to investigate different retrofit solutions for air conditioning, evaluating them in terms of energy consumption and cost and the impact of increased outdoor air exchange rates on countering the propagation of COVID-19; the latter is the main novelty of the paper. As a case study, we take an existing office building located in Central Italy that was previously not equipped with a mechanical ventilation system (a system with primary air was introduced during the study). The energy analysis was conducted using dynamic simulation software after validation through energy bills; energy and economic analyses were conducted considering different external-air exchange rates. An optimal number of outdoor air changes was found to mitigate the risk of COVID-19 infection, a finding in line with the international literature. The increase in air changes with outdoor air leads to a rise in energy consumption and costs. These values were evaluated for different air conditioning systems and operational schedules. These drawbacks can be made less significant by combining interventions in the system with energy-efficiency measures applied to the building envelope. [ABSTRACT FROM AUTHOR]

The integration of renewable energy systems in buildings leads to a reduction in energy bills for end users and a reduction in the carbon footprint of such buildings, usually referred to as prosumers. In addition, the installation of charging points for the electric vehicles of people working or living in these buildings can further improve the energy efficiency of the whole system if innovative technologies, such as vehicle-to-building (V2B) technologies, are implemented. The aim of this paper is to present an Energy Management System (EMS) based on mathematical programming that has been developed to optimally manage a prosumer building equipped with photovoltaics, a micro wind turbine and several charging points for electric vehicles. Capabilities curves of renewable power plant inverters are modelled within the EMS, as well as the possibility to apply power curtailment and V2B. The use of V2B technology reduces the amount of electricity purchased from the public grid, while the use of smart inverters for the power plants allows zero reactive power to be drawn from the grid. Levelized cost of electricity (LCOE) is used to quantify curtailment costs, while penalties on reactive power absorption from the distribution network are evaluated in accordance with the current regulatory framework. Specifically, the model is applied to a prosumer building owned by the postal service in a large city in Italy. The paper reports the main results of the study and proposes a sensitivity analysis on the number of charging stations and vehicles, as well as on the consideration of different typical days characterized by different load and generation profiles. This paper also investigates how errors in forecasting energy production from renewable sources impact the optimal operation of the whole system. [ABSTRACT FROM AUTHOR]

The use of biomass can be a strategic way to realize a carbon-neutral energy plan, ensuring a fuel feedstock. Residual biomass arising from pruning is demonstrated to be an important energy resource in terms of quantity and quality. In the Salento peninsula, Apulia Region, in the south of Italy, a dramatic outbreak of Xylella fastidiosa has decimated olive trees since 2013, gaining a considerable amount of wood biomass. This paper, starting from the need to find a way to optimize the use of this available stock, reviews the main technologies on the utilization of olive wood for energy purposes. In particular, processes and products are here described, and an energy analysis compares lower heating value (LHV), higher heating value (HHV), mass yield, process operating conditions, and energy generated and spent by the process in order to find the most effective technology in order to optimize the energy use of olive biomass. The conclusions show the advantages and disadvantages of each technology. Pyrolysis performs well, showing the best results for both char HHV and syngas yield under different operating conditions. Gasification seems to be the most appropriate among conversion technologies to optimize olive tree pruning for energy purposes, as it can be used to produce both electrical and thermal energy. In terms of economic valorization, char is the most promising material representing a value-added product, the quality and versatility of which ranges from fuel to soil improvers and additives for the construction of supercapacitors. Conversely, its disadvantages are mainly represented by high ash content, which can slightly decrease the boiler efficiency. Finally, the amount of alkali metals can produce several problems, such as fouling, slagging, corrosion, etc., posing a challenge for combustion control and pollutant minimization. [ABSTRACT FROM AUTHOR]

The building and construction sector has a significant impact on the CO2 emissions and pollutants released into the atmosphere, which contribute to climate change. The EPDB Directive mandates the achievement of minimum energy class E for all residential buildings by 2030 and energy class D by 2033. Particularly, in Italy, about 86% of the existing building stock predates the enactment of any energy laws or regulations, making it imperative to apply the energy efficiency interventions. This paper provides a support decision tool for the identification of the standardized interventions in the building envelope, the air conditioning system, and domestic hot water production. This study is focused on a specific construction period class (1976–1990) in six different climatic zones. The methodological approach is based on a cataloguing phase and the definition of ante operam energy classes as well as on case study identification, energy requalification intervention identification, solution simulations, and cost estimation. By simulating the standardized interventions for each climatic zone, a range of possible combinations is identified. The most advantageous ones are determined based on a cost–benefit analysis considering the potential class jump achieved. The research result is a matrix of energy efficiency interventions that is applicable to each climatic zone and can be extended to the existing housing stock. [ABSTRACT FROM AUTHOR]

In the current context of joint efforts towards the decarbonisation of buildings, integrating occupants' comfort and health with latest technological advancements for energy efficiency is at the center of the latest development of research, policies and professional practice. Radiant systems are encountering great success since the low-thickness systems can also be used in renovation projects for both heating and cooling, while guaranteeing optimal comfort. However, dehumidification is often required for optimal radiant cooling operation with no condensation risks, and the great potential of mechanical ventilation systems to optimally address the needs for dehumidification, air renewal, health and energy efficiency appears to be far from its full exploitation in the post-COVID-19 era. The present paper aims at providing a quantification of the energy and financial impacts of the implementation of a controlled mechanical ventilation system (CMV) coupled to a radiant system in a typical residential case study building in Italy. The results show that the sole CMV may decrease primary energy demand and energy costs by more than 30% and contribute to an increase in the smart readiness of the building by 8%, but further incentive policies must be developed to cover the still high investment and maintenance cost. [ABSTRACT FROM AUTHOR]

As the urgency to mitigate climate change intensifies, the achievement of zero carbon targets in the built environment has become a critical objective. Building retrofitting plays a vital role in reducing energy consumption and carbon emissions in existing buildings. This paper presents an approach that combines Building Information Modeling (BIM) with multiple domains to strive for zero carbon targets in building retrofit projects. The proposed approach is based on a dynamic multi-parameter analysis that integrates indoor comfort, energy savings, CO2eq reduction, and the social cost of carbon while considering investment costs. Renewable energy technologies, such as photovoltaic panels and solar thermal systems, are emphasized to achieve the desired zero-carbon outcomes. Real-time monitoring mechanisms enable continuous performance evaluation and adaptive retrofit strategies for further energy savings. This approach is validated through a case study of an existing thermal bath building, known as "Terme Lucane", located in southern Italy. The results of the study demonstrate significant reductions in energy consumption and carbon emissions, highlighting the potential of the proposed approach to achieve zero carbon targets through the integration of multi-data BIM implementation. These findings offer a promising pathway for building retrofit projects aiming for zero carbon targets through multi-data BIM modeling. [ABSTRACT FROM AUTHOR]

The Renovation Wave for Europe highlighted the role of the public building stock for which Directive 2012/27/EU has set an annual renewal rate of 3%, which should rise to reach the goal of decarbonization by 2050. In this paper, the energy retrofit of an educational building—at the academic level—in Southern Italy was investigated. The aim was to evaluate the incentive share, which could accelerate the energy efficiency process, to achieve a cost-effective nZEB. The results show that the highest incentive rate is required for interventions on the opaque building envelope, which are also those that allow the least energy savings. An incentive rate of about 45% for the energy efficiency of the transparent envelope is necessary to reduce the payback time by about 7 years. The efficiency of the plants and the installation of a PV system are energetically and economically convenient even without forms of economic incentive. Finally, if the building is brought to high energy standards—a primary energy saving of 46% and energy class A3—an incentive rate of 40% is required to repay the intervention in about 10 years. [ABSTRACT FROM AUTHOR]

Increasing interest in natural gas-fired gensets is motivated by District Heating (DH) network applications, especially in urban areas. Even if they represent customary solutions, when used in DH, duty regimes are driven by network thermal energy demands resulting in discontinuous operation, which affects their remaining useful life. As such, the attention on effective condition-based maintenance has gained momentum. In this paper, a novel unsupervised anomaly detection framework is proposed for gensets in DH networks based on Supervisory Control And Data Acquisition (SCADA) data. The framework relies on multivariate Machine-Learning (ML) regression models trained with a Leave-One-Out Cross-Validation method. Model residuals generated during the testing phase are then post-processed with a sliding threshold approach based on a rolling average. This methodology is tested against nine major failures that occurred on the gas genset installed in the Aosta DH plant in Italy. The results show that the proposed framework successfully detects anomalies and anticipates SCADA alarms related to unscheduled downtime. [ABSTRACT FROM AUTHOR]

Green hydrogen exploitation plays a crucial role in achieving carbon neutrality by 2050. Hydrogen, in fact, provides a number of key benefits for the energy system, due to its integrability with other clean technologies for energy production and consumption. This paper is aimed at presenting the project of recovery of an abandoned industrial area located in central Italy by developing a site for the production of green hydrogen. To this aim, the analysis of the territorial and industrial context of the area allowed us to design the project phases and to define the sizing criteria of the hydrogen production plant. The results of a preliminary cost–benefit analysis show that a huge initial investment is required and that, in the short term, the project is sustainable only with a very large public grant. On the other hand, in the long term, the project is sustainable, and the benefits significantly overcome the costs. [ABSTRACT FROM AUTHOR]

Market-based instruments such as white certificates offer the potential to increase efficiency gains, reduce primary energy consumption and make energy systems more resilient. The purpose of this paper is to provide insights into the white certificate scheme through a case study analysis. In light of increasing decarbonization and energy efficiency targets, it is important to rethink the role that policy instruments play in the energy transition, including the energy efficiency obligation schemes within which white certificate schemes fall. We focus on Italy's white certificate scheme because it is among the longest-lived and has achieved notable results. The scheme is characterized by annually increasing energy savings targets, flexibility, the opportunity to include many interventions, and the role of energy services companies. We provide evidence based on an empirical survey and fill the research gap left by the latest updates to the scheme along with an appraisal of those updates, which covers prominent scheme innovations such as its stability mechanism. Our research can serve as a baseline for policymakers in designing white certificate schemes in countries with little related previous experience and provide useful information from countries where similar schemes have been implemented to fine-tune similar market-based mechanisms to improve energy efficiency. [ABSTRACT FROM AUTHOR]

This paper contributes to the climate policy discussion by focusing on the challenges and opportunities of reaching net zero emissions by 2050 in Italy. To support Italian energy planning, we developed energy roadmaps towards national climate neutrality, consistent with the Paris Agreement objectives and the IPCC goal of limiting the increase in global surface temperature to 1.5 °C. Starting from the Italian framework, these scenarios identify the correlations among the main pillars for the change of the energy paradigm towards net emissions by 2050. The energy scenarios were developed using TIMES-RSE, a partial equilibrium and technology-rich optimization model of the entire Italian energy system. Subsequently, an in-depth analysis was developed with the sMTISIM, a long-term simulator of power system and electricity markets. The results show that, to achieve climate neutrality by 2050, the Italian energy system will have to experience profound transformations on multiple and strongly related dimensions. A predominantly renewable-based energy mix (at least 80–90% by 2050) is essential to decarbonize most of the final energy consumption. However, the strong increase of non-programmable renewable sources requires particular attention to new flexibility resources needed for the power system, such as Power-to-X. The green fuels produced from renewables via Power-to-X will be a vital energy source for those sectors where electrification faces technical and economic barriers. The paper's findings also confirm that the European "energy efficiency first" principle represents the very first step on the road to climate neutrality. [ABSTRACT FROM AUTHOR]

The last ten years have witnessed an increase in publications focusing on bioeconomy as a proposal to confront the global challenges of climate change, depletion of non-renewable resources and ecosystem degradation. This paper investigates the scientific literature on issues related agricultural bioeconomy by applying a bibliometric network analysis. Bibliometric analysis is applied to the publications of the Scopus database during the period 2010–2020 in order to provide an overview of the main aspects that characterize agricultural bioeconomy. The results showed that out of a total of 1100 scientific papers, only 2.45% were published in 2010, while the corresponding share in 2020 was 20.81%. In the five years of 2016–2020, cumulatively, 70.63% of the publications were made, showing the dynamic evolution of bioeconomy. In addition, out of 85 countries in total, Germany and Italy are the two countries with most publications, while the fragmentation of research is evident with the creation of two main nodes, the European and the American. Moreover, keyword analysis showed that biomass and sustainability are two main recurring concepts, confirming that, currently, bioeconomy operates at three different levels: energy demand, land demand, and governance. It is apparent that to boost the development of agricultural bioeconomy, the following aspects should be assessed: the effective use of resources, an understanding of the key drivers of agricultural bioeconomy, and a clear perception of their associations. There is still no consensus as to which are the key factors that will accelerate its sustainable development. Our pursuit is to use the tools of bibliometric analysis to reach more critical conclusions regarding the agricultural bioeconomy, rather than approach it in a static way. [ABSTRACT FROM AUTHOR]

The current paper contributes to the literature on community renewable energy by considering two projects developed in the north-west of Italy, in the Piedmont region. Community renewable energy is increasingly regarded by academic literature and policy discourse as crucial to ensure a socially and environmentally just energy transition. In spite of the growing diffusion of community renewable energy projects, there is still a lack of theoretically informed analyses. Our article tries to address this gap by combining two theoretical perspectives: the multilevel perspective and the socio-technical imaginaries approach. Applying the first perspective helps reconstruct the context and circumstances that have permitted the Piedmont's energy community projects to emerge. Particular attention is given to the windows of opportunity created by the Regional Law 12/2018, which acknowledged the establishment of energy communities for the first time in Italy. The socio-technical imaginaries perspective allows the identification of collective ideas and meanings that emerge when individuals or groups promote a socio-technical innovation. Based on this analysis, three main future changes are associated with community renewable energy: an integral ecology approach, a stronger sense of community, and a local development opportunity for rural areas characterised by depopulation, a low employment rate, and high energy demand. [ABSTRACT FROM AUTHOR]