Search

Economic Dispatch Problems (EDP) refer to the process of determining the power output of generation units such that the electricity demand of the system is satisfied at a minimum cost while technical and operational constraints of the system are satisfied. This procedure is vital in the efficient energy management of electricity networks since it can ensure the reliable and efficient operation of power systems. As power systems transition from conventional to modern ones, new components and constraints are introduced to power systems, making the EDP increasingly complex. This highlights the importance of developing advanced optimization techniques that can efficiently handle these new complexities to ensure optimal operation and cost-effectiveness of power systems. This review paper provides a comprehensive exploration of the EDP, encompassing its mathematical formulation and the examination of commonly used problem formulation techniques, including single and multi-objective optimization methods. It also explores the progression of paradigms in economic dispatch, tracing the journey from traditional methods to contemporary strategies in power system management. The paper categorizes the commonly utilized techniques for solving EDP into four groups: conventional mathematical approaches, uncertainty modelling methods, artificial intelligence-driven techniques, and hybrid algorithms. It identifies critical research gaps, a predominant focus on single-case studies that limit the generalizability of findings, and the challenge of comparing research due to arbitrary system choices and formulation variations. The present paper calls for the implementation of standardized evaluation criteria and the inclusion of a diverse range of case studies to enhance the practicality of optimization techniques in the field. [ABSTRACT FROM AUTHOR]

In this paper, a heuristic approach to doubly fed induction generator (DFIG) protection and low voltage ride through (LVRT) is carried out. DFIG-based wind systems are rapidly penetrating the power generation section. Despite their advantages, their direct coupling grid makes them highly sensitive to symmetrical faults. A well-known solution to this is the crowbar method of DFIG protection. This paper provides a method to determine the optimal crowbar resistance value, to ensure a strong trade-off between the rotor current and DC voltage transients. Further, since the crowbar method requires disconnection from the grid, the linear quadratic regulator (LQR) is applied to the system. This is to ensure fault ride through compliance with recent grid code requirements. The well-known PSO, as well as the recently developed African vultures optimization algorithm (AVOA), was applied to the problem. The first set of results show that for severe symmetrical voltage dips, the AVOA provides a good option for crowbar magnitude optimization, whereas PSO performed better for moderately severe dips. Secondly, when the LQR was optimized via the AVOA, it exhibited superiority over the conventional PSO-based PI controller. This superiority was in terms of rotor current transient magnitude, DC voltage transient magnitude, and reactive power steady-state ripple and were in the order of 67.5%, 20.35%, and 37.55%, respectively. When comparing the crowbar method and the LQR, it was observed that despite the LQR exhibiting superiority in terms of transient performance, the crowbar method offered a unanimously superior settling time. [ABSTRACT FROM AUTHOR]

The pursuit of achieving total power network observability in smart grids using Phasor Measurement Units (PMUs) carries a significant promise of real-time Wide-Area Monitoring, Protection, and Control (WAMPAC). PMU applications eliminate periodical measurements, thereby increasing accuracy through a high sampling rate of the measured power systems quantities. The high costs of installation of PMUs for total power system observability presents a challenge in the implementation of PMUs. This is due to the expensive costs of PMU devices. This has led to a prominent optimal PMU placement (OPP) problem that researchers tirelessly aim to solve by ensuring a complete power network observability while using the least installed PMU devices possible. In this paper, a novel Binary Firefly Algorithm (BFA) based on the node degree centrality scores of each bus is proposed to minimize PMU installations. The BFA solves the OPP problem in consideration of the effect of Zero Injection Buses (ZIBs) under normal operation and single PMU outage (SPO). The robustness and efficiency of the proposed algorithm is tested on IEEE-approved test systems and visualized with a force-directed technique on an undirected power network graph. The proposed BFA yields the same but better optimal PMU numbers, obtained by existing meta-heuristic optimization techniques found in the literature for each of the IEEE test cases, as well as highlighting the cost–benefit of having a robust system against single PMU loss while considering the ZIB effect for an improved system measurement availability. [ABSTRACT FROM AUTHOR]

Accurate and effective wind power prediction plays an important role in wind power generation, distribution, and management. Inthis paper, a hybrid algorithm based on gradient descent and meta-heuristic optimization is designed to improve the accuracy of prediction and reduce the computational burden. The hybrid algorithm includes three steps: in the first step, we use the gradient descent algorithm to get the initial parameters. Secondly, we input the initial parameters into the meta-heuristic optimization algorithm to search for the "best parameters" (high-quality inferior solutions). Finally, we input optimized parameters into the RMSProp optimization algorithm and conduct gradient descent again to find a better solution. We used 2021 wind power data from Guangxi, China for the experiment. The results show that the hybrid prediction algorithm has better performance than the traditional Back Propagation (BP) in accuracy, stability, and efficiency. [ABSTRACT FROM AUTHOR]

The operation of the photovoltaic (PV) system under partial shading conditions (PSC) is complicated since the output characteristic of the PV system is profoundly affected by the heterogeneous irradiance of PSC. This paper proposes a dynamic reconfiguration framework to tackle PSC in the PV array. Continuous operation of the dynamic PV array reconfiguration under cloud-induced partial shading is considered by developing an emulator of the moving cloud. In addition, the Particle Swarm Optimization and Rao algorithms are improved to obtain the optimal PV array configuration under PSC. The operation of switching is enhanced by simultaneously considering the total switching times and the operation of highly active switches. The simulation results on the 9 × 9 PV array demonstrate the effectiveness of the proposed framework in terms of reducing the number of local maximum power points on the power-voltage characteristic, enhancing power output, and relieving stress on the switching operation of the PV array under different PSC. [ABSTRACT FROM AUTHOR]

In fault detection and the diagnosis of large industrial systems, whose chemical processes usually exhibit complex, high-dimensional, time-varying and non-Gaussian characteristics, the classification accuracy of traditional methods is low. In this paper, a kernel limit learning machine (KELM) based on an adaptive variation sparrow search algorithm (AVSSA) is proposed. Firstly, the dataset is optimized by removing redundant features using the eXtreme Gradient Boosting (XGBOOST) model. Secondly, a new optimization algorithm, AVSSA, is proposed to automatically adjust the network hyperparameters of KELM to improve the performance of the fault classifier. Finally, the optimized feature sequences are fed into the proposed classifier to obtain the final diagnosis results. The Tennessee Eastman (TE) chemical process is used to verify the effectiveness of the proposed method through multidimensional diagnostic metrics. The results show that our proposed diagnosis method can significantly improve the accuracy of TE process fault diagnosis compared with traditional optimization algorithms. The average diagnosis rate for 21 faults was 91.00%. [ABSTRACT FROM AUTHOR]

Energy saving is an important issue for multiple-chiller systems. Optimal chiller loading (OCL) in multiple-chiller systems has been investigated with many optimization algorithms to save energy. Particle swarm optimization (PSO) algorithm has been successful in solving this problem in some cases, but not in all. This study innovatively added a team evolution to the original particle swarm optimization algorithm, called team particle swarm optimization (TPSO). The TPSO enhances the effectiveness of original particle swarm optimization to better solve the OCL problem. The TPSO algorithm is composed of two evolutions: particle evolution and team evolution. The partial load ratio (PLR) of each operating chiller and the on-off state of each chiller are the particle evolution parameters and team evolution parameters, respectively. To evaluate the performance of the proposed method, this paper adopts three case studies so the results generated from the proposed algorithm TPSO, the original particle swarm optimization (PSO) and other recently published algorithms can be compared. In these three case studies, the optimal results generated by using TPSO algorithm are the same as those by other compared algorithms. In case 1 under 5717 RT and 5334 RT cooling load, the results generated using the TPSO are lower than those by the original PSO in the amounts of 63.35 and 79.33 kW, respectively. The results indicated that the TPSO algorithm not only enabled the optimal solution in minimizing energy consumption, but also demonstrated the best stability when compared to other algorithms. In conclusion, the presented TPSO algorithm is an efficient and promising new algorithm for solving the OCL problem. [ABSTRACT FROM AUTHOR]

Electromagnetic design problems are generally formulated as nonlinear programming problems with multimodal objective functions and continuous variables. These can be solved by either a deterministic or a stochastic optimization algorithm. Recently, many intelligent optimization algorithms, such as particle swarm optimization (PSO), genetic algorithm (GA) and artificial bee colony (ABC), have been proposed and applied to electromagnetic design problems with promising results. However, there is no universal algorithm which can be used to solve engineering design problems. In this paper, a stochastic smart quantum particle swarm optimization (SQPSO) algorithm is introduced. In the proposed SQPSO, to tackle the premature convergence problem in order to improve the global search ability, a smart particle and a memory archive are adopted instead of mutation operations. Moreover, to enhance the exploration searching ability, a new set of random numbers and control parameters are introduced. Experimental results validate that the adopted control policy in this work can achieve a good balance between exploration and exploitation. Finally, the SQPSO has been tested on well-known optimization benchmark functions and implemented on the electromagnetic TEAM workshop problem 22. The simulation result shows an outstanding capability of the proposed algorithm in speeding convergence compared to other algorithms. [ABSTRACT FROM AUTHOR]

This paper proposes an original multi-criteria decision-making optimization algorithm to select the best solar panels in an existing market and optimally size the photovoltaic (PV) system for an electric vehicle parking lot (EVPL). Our proposed algorithm is called rank-weigh-rank (RWR), and it is compared to the well-known technique for order of preference by similarity to ideal solution (TOPSIS) optimization algorithm under the same conditions for validation purposes. Results show that the speed of our proposed algorithm (RWR) in finding the best solution increases exponentially compared to TOPSIS when the numbers of alternatives and criteria increase. Moreover, 77% is the probability of obtaining results with more than 80% accuracy compared to TOPSIS, which validates the efficiency of our algorithm. In addition, we were able to design an EVPL with a power self-sufficiency ratio of 60.8%, the energy self-sufficiency ratio of 74.7%, and a payback period of 10.58 years. Moreover, the renewable energy-based EVPL was able to reduce the power losses on the network by 95.7% compared to an EVPL without a renewable energy system and improve the voltage deviation. [ABSTRACT FROM AUTHOR]

Recently, the introduction of electric vehicles has given rise to a new paradigm in the transportation field, spurring the public transport service in the direction of using completely electric bus fleets. In this context, one of the main challenges is that of guaranteeing an optimal scheduling of the charging process, while reducing the power supply requested from the main grid, and improving the efficiency of the resource allocation. Therefore, in this paper, a power allocation strategy is proposed in order to optimize the charging of electric bus fleets, while fulfilling the limitation imposed on the maximum available power, as well as ensuring limited charging times. Specifically, relying on real bus charging scenarios, a charging optimization algorithm based on a Nonlinear Additive Increase Multiplicative Decrease (NAIMD) strategy is proposed and discussed. This approach is designed on the basis of real charging power curves related to the batteries of the considered vehicles. Moreover, the adopted NAIMD algorithm allows us to minimize the sum of charging times in the presence of saturation constraints in a distributed way and with a small amount of aggregated data sent over the communication network. Finally, an extensive simulation campaign is illustrated, showing the effectiveness of the proposed approach both in allocating the power resources and in sizing the maximum power capacity of charging plants in progress. [ABSTRACT FROM AUTHOR]

Reformulating the history matching problem from a least-square mathematical optimization problem into a Markov Decision Process introduces a method in which reinforcement learning can be utilized to solve the problem. This method provides a mechanism where an artificial deep neural network agent can interact with the reservoir simulator and find multiple different solutions to the problem. Such a formulation allows for solving the problem in parallel by launching multiple concurrent environments enabling the agent to learn simultaneously from all the environments at once, achieving significant speed up. [ABSTRACT FROM AUTHOR]

This paper proposes the application of a metaheuristic algorithm inspired by the social behavior of chimps in nature, called Chimp Optimization Algorithm (ChOA), for the maximum power point tracking of solar photovoltaic (PV) strings. In this algorithm, the chimps hunting process is mathematically articulated, and new mechanisms are designed to perform the exploration and exploitation. To evaluate the ChOA, it is applied to some fixed dimension benchmark functions and engineering problem application of tracking maximum power from solar PV systems under partial shading conditions. Partial shading condition is a common problem that appears in the solar PV modules installed in domestic areas. This shading alters the power developed by the solar PV panel, and exhibits multiple peaks on the power variation with voltage (P-V) characteristic curve. The dynamics of the solar PV system have been considered, and the mathematical model of a single objective function has been framed for tuning the optimal control parameter with the suggested algorithm. Implementing various practical shading patterns of solar PV systems with the ChOA algorithm has shown improved solar power point tracking performance compared to other algorithms in the literature. [ABSTRACT FROM AUTHOR]

Automatic Generation Control (AGC) delivers a high quality electrical energy to energy consumers using efficient and intelligent control systems ensuring nominal operating frequency and organized tie-line power deviation. Subsequently, for the AGC analysis of a two-area interconnected hydro-gas-thermal-wind generating unit, a novel Fractional Order Integral-Tilt Derivative (FOI-TD) controller is proposed that is fine-tuned by a powerful meta-heuristic optimization technique referred as Improved-Fitness Dependent Optimizer (I-FDO) algorithm. For more realistic analysis, various constraints, such as Boiler Dynamics (BD), Time Delay (TD), Generation Rate Constraint (GRC), and Governor Dead Zone (GDZ) having non-linear features are incorporated in the specified system model. Moreover, a comparative analysis of I-FDO algorithm is performed with state-of-the-art approaches, such as FDO, teaching learning based optimization, and particle swarm optimization algorithms. Further, the proposed I-FDO tuned controller is compared with Fractional Order Tilt Integral Derivative (FOTID), PID, and Integral-Tilt Derivative (I-TD) controllers. The performance analysis demonstrates that proposed FOI-TD controller provides better performance and show strong robustness by changing system parameters and load condition in the range of  ± 50%, compared to other controllers. [ABSTRACT FROM AUTHOR]