Search

Geothermal energy exploration, development, and research have been ongoing in Canada for several decades. The country's cold climate and the push to develop renewable energy sources have driven interest in geothermal energy. Despite this drive, regulatory complexities and competition with other relatively inexpensive energy sources with existing infrastructure have hindered development. As such, interest has grown and waned with changes in the energy economy over several decades, leaving many projects at a standstill. As of January 2023, there are currently no operational geothermal power projects in Canada. Many hot spring pool and spa complexes remain active, and Canada is a leading country in the installation of ground source heat pumps (GSHPs; also called geo-exchange systems). However, in the last decade, the interest in deep geothermal systems has renewed, with many new projects starting up across several provinces and territories. Moreover, projects that had shown limited progress for many years—such as Mount Meager in British Columbia—have begun to renew their development efforts. Research is also expanding within prominent research groups and universities. The areas of focus include both building upon previous studies (such as thermal gradients and the heat flow in sedimentary basins) and researching new methods and resources (such as GSHPs, closed-loop systems, integrated geothermal operations, and hybrid systems, including heat storage). The development is supported by federal, provincial, and territorial governments through grants and the development of regulatory frameworks. Although challenges still remain for Canada to develop its geothermal energy resources, several power, thermal, and co-production projects, ongoing research, funding, and regulatory acts are all moving forward to support geothermal development. This paper aims to study Canada's geothermal energy update in 2023 regarding the aspects mentioned above. [ABSTRACT FROM AUTHOR]

There is a large amount of drilling core data in the Mackay River oil sands block in Canada, and the accurate identification of facies from the cores is important and necessary for the understanding of the subsurface reservoir. The traditional recognition method of facies from cores is by human work and is very time consuming. Furthermore, the results are different according to different geologists because of the subjective judgment criterion. An efficient and objective method is important to solve the above problem. In this paper, the deep learning image-recognition algorithm is used to automatically and intelligently recognize the facies type from the core image. Through a series of high-reliability preprocessing operations, such as cropping, segmentation, rotation transformation, and noise removal of the original core image, that have been manually identified, the key feature information in the images is extracted based on the ResNet50 convolutional neural network. On the dataset of about 200 core images from 13 facies, an intelligent identification system of facies from core images is constructed, which realizes automatic facies identification from core images. Comparing this method with traditional convolutional neural networks and support vector machines (SVM), the results show that the recognition accuracy of this model is as high as 91.12%, which is higher than the other two models. It is also shown that for a relatively special dataset, such as core images, it is necessary to rely on their global features in order to classify them, and, with a large similarity between some of the categories, it is extremely difficult to classify them. The selection of a suitable neural network model can have a great impact on the accuracy of recognition results. Then, the recognized facies are input as hard data to construct the three-dimensional facies model, which reveals the complex heterogeneity and distribution of the subsurface reservoir for further exploration and development. [ABSTRACT FROM AUTHOR]

With the implementation of new policies supporting renewable natural gas production from organic wastes, Canada began replacing traditional disposal methods with highly integrated biogas production strategies. Herein, data from published papers, Canadian Biogas Association, Canada's national statistical agency, and energy companies' websites were gathered to gain insight into the current status of anaerobic digestion plants in recovering energy and resource from organic wastes. The availability of materials prepared for recycling by companies and local waste management organizations and existing infrastructures for municipal solid waste management were examined. Governmental incentives and discouragements in Canada and world anaerobic digestion leaders regarding organic fraction municipal solid waste management were comprehensively reviewed to identify the opportunities for developing large-scale anaerobic digestion in Canada. A range of anaerobic digestion facilities, including water resource recovery facilities, standalone digesters, and on-farm digesters throughout Ontario, were compared in terms of digestion type, digester volume, feedstock (s), and electricity capacity to better understand the current role of biogas plants in this province. Finally, technology perspectives, solutions, and roadmaps were discussed to shape the future in terms of organic fraction municipal solid waste management. The findings suggested that the biogas industry growth in Canada relies on provincial energy and waste management policies, advanced technologies for diverting organic waste from landfills, improving biogas yield using existing pretreatment methods, and educating farmers regarding digester operations. [ABSTRACT FROM AUTHOR]

As Alberta increases conventional solar power generation, land-use conflicts with agriculture increase. A solution that enables low-carbon electricity generation and continued (in some cases, increased) agricultural output is the co-locating of solar photovoltaics (PV) and agriculture: agrivoltaics. This review analyzes policies that impact the growth of agrivoltaics in Alberta. Solar PV-based electricity generation is governed by three regulations based on system capacity. In addition, agrivoltaics falls under various legislations, frameworks, and guidelines for land utilization. These include the Land Use Framework, Alberta Land Stewardship Act, Municipal Government Act, Special Areas Disposition, Bill 22, and other policies, which are reviewed in the agrivoltaics context. Several policies are recommended to support the rapid deployment of agrivoltaics. Openly accessible agrivoltaics research will help optimize agrivoltaic systems for the region, and can be coupled with public education to galvanize social acceptability of large-scale PV deployment. Clearly defining and categorizing agrivoltaics technology, developing agrivoltaics standards, making agrivoltaics technology-friendly regulations and frameworks, and developing programs and policies to incentivize agrivoltaics deployment over conventional PV will all accelerate the technology's deployment. Through these measures, Alberta can achieve conservation and sustainability in the food and energy sectors while simultaneously addressing their renewable energy and climate-related goals. [ABSTRACT FROM AUTHOR]

We examine technological progress in the US and Canada to answer the question: has the efficiency (e.g., the edible energy efficiency, or EEE) for producing agricultural products in the US and Canada increased in recent decades? Specifically, we determined the energy efficiency of agriculture at the farm gate in recent decades by dividing the outputs (the total annual crop and animal output in energy units minus the feed used for animal production and the grain used for ethanol production) by the energy inputs: all the energy used by the nation to produce food (the energy used to generate and apply the fertilizer, pesticides, seed and to operate machinery) minus the energy inputs to produce grain for ethanol. Our data comes primarily from national and international agricultural censuses. Our study found that the energy efficiency of US agriculture has more than doubled from 0.8:1 in 1970 to 2.2:1 by 2000, then increased more slowly to 2.3:1 by 2009. The energy efficiency of the agricultural sector in Canada has not changed appreciably since 1980, and has varied about a mean of 2:1 from 1981 to 2009. Our study found that EEE improvements in the US could be attributable in part to advancements in crop production per hectare, and lower direct fuel consumption, but also a greater proportion of less energy-intensive corn and changes to the diet of livestock (e.g., increased use of meals and other by-products which have increased the availability of grain). Thus increases due to technological progress alone for the last several decades appear small, less than one percent a year. [ABSTRACT FROM AUTHOR]

As Canadian crude bitumen production from oil sands has increased in recent decades, the nation's oil and gas industry has become a significant contributor to national greenhouse gas emissions. Canada has developed carbon emission reduction targets to meet its Nationally Determined Contributions and Mid-Century Strategy goals. A detailed profile of energy consumption pathways in the oil sands industry is necessary to identify potential areas of improvement and to monitor progress toward meeting emissions reduction targets. Much of the existing literature for oil sands modeling provides input assumptions with different technological boundaries. For a set of oil sands extraction and upgrading technologies, this study first reviews the literature and then quantifies energy input requirements, CO2 emissions, and operating costs for a set of consistent technological boundaries and energy units. Summary results refer to requirements and costs at the production facility, excluding transportation and blending costs. An energy system diagram of oil sands production that matches these boundaries is provided, which can be used by integrated assessment models, oil sands companies, and government ministries to evaluate the present and future energy consumption and emissions pathways of the oil sands industry. [ABSTRACT FROM AUTHOR]