Search

The pulp and paper industry (PPI) has several opportunities to contribute to meeting prevailing climate targets. It can cut its own CO2 emissions, which currently account for 2% of global industrial fossil CO2 emissions, and it has an opportunity to produce renewable energy, fuels, and materials for other sectors. The purpose of this study is to improve understanding of the decarbonization prospects of the PPI. The study provides insights on the magnitude of needed annual renewal rates for several possible net-zero target years of industrial fossil CO2 emissions in the PPI and discusses decarbonization opportunities, namely, energy and material efficiency improvement, fuel switching, electrification, renewable energy production, carbon capture, and new products. The effects of climate policies on the decarbonization opportunities are critically evaluated to provide an overview of the current and future business environment of the European PPI. The focus is on Europe, but other regions are analyzed briefly to widen the view. The analysis shows that there are no major technical barriers to the fossil-free operation of the PPI, but the sector renovates slowly, and many new opportunities are not implemented on a large scale due to immature technology, poor economic feasibility, or unclear political environment. [ABSTRACT FROM AUTHOR]

The EU has set the ambitious target of raising the share of EU energy consumption produced from renewable resources to 32% by 2030, with a target of climate neutrality by 2050. The aim of this paper is to assess the role of biomass usage in the context of these targets. The paper identifies the progress made between 2013 and 2022 by focusing on a selection of EU countries. The largest bioenergy increments of 130, 77, and 60 PJ were reported for Poland, Sweden, and the Netherlands. This study evaluates the crucial role of co-generation and heat in EU regions, with biomass usage between 55 and 80% of the combined heat and power (CHP) energy in Nordic countries. The future perspectives for bioenergy based on EU policies, biomass resources, and technical issues were addressed. The EU possesses around 9% of the global biomass supply, ensuring a certain level of biomass resource dependence. Thus, the biomass usage demand in energy production, non-energy sectors, and transport is expected to rise, leading to increments of 13–76% on biomass imports. It appears that bioenergy development is mostly limited by economic issues and uneven support for bioenergy in different EU countries as well as environmental issues. The study shows a promising and sustainable potential of bioenergy in the EU as a renewable energy source while minimizing negative impacts on the environment and the economy. By 2050, liquid biofuels are likely to be increasingly used in the transport sector. Non-energy sector usage of biomass is still in an early stage of development, except for the pulp and paper industry, and significant use of biomass in non-energy sectors seems unlikely in the near future. [ABSTRACT FROM AUTHOR]

In this framework, experimental tests on different battery technologies, BMS and cooling systems are extremely important to extend the battery life and BEV performance (Sehil et al. [[13]]). Electrical machines and magnetic components, high-voltage voltage power converters, and battery storage systems are some basic bricks to build an effective and efficient energy conversion environment. Electrical Machines and Power Converters The electrical power conversion from renewable energy sources plays a crucial role in the development of a sustainable society. Finally, the fil rouge of every contribution in this section is oriented to investigate the power converters, electrical machines, magnetic components, and battery storage systems in actual energy conversion applications for renewable energy sources integration by a modelling approach. [Extracted from the article]

This study explored the association between renewable energy uptake and digitalization in the sector by reviewing relevant literature (published 2010–2022), with the aim of identifying the existing utilization of digital technologies within the sector, challenges to adoption, and future prospects. Different search engines (SCOPUS, Web of Science, and Google Scholar) were used to locate relevant papers and documents. The results revealed the high significance of digital technologies in supporting the renewable energy sector, with high costs and security risks representing the key challenges. Most papers reviewed had a positive outlook, but recommended further research and development for effective energy transition and resilient infrastructure. The current drivers of the integration of digital technologies to support the diffusion of renewable energy sources appear to extend beyond energy demand and involve many aspects of sustainability and sustainable development. Compared with previous reviews, this work has unique scope and novelty since it considers the bigger picture of the coupling between digitalization and the renewable energy sector, with a greater focus on critical areas in these two interconnected bodies that need to be addressed. The relatively small sample of relevant papers (69 from 836 hits) located in the literature review confirms the need for more research covering the subject in greater depth. [ABSTRACT FROM AUTHOR]

Emerging global environmental pollution issues have caused a reduction in coal utilization, leading to an increased research focus on biomass use as an alternative. However, due to the low heat values of biomass, studies in this field are still in progress. Biomass primarily comprises cellulose, hemicellulose, and lignin. To determine the composition of these three components, the measurement methods recommended by TAPPI (Technical Association of the Pulp and Paper Industry) and NREL (National Renewable Energy Laboratory) are typically employed involving equipment such as HPLC. However, these methods are time consuming. In this study, we proposed a model for predicting cellulose, hemicellulose, and lignin contents based on elemental and industrial analyses. A dataset comprising 174 samples was used to develop this model. This was validated using 25 additional samples. The R2P values for cellulose, hemicellulose, and lignin were 0.6104–0.6362, 0.4803–0.5112, and 0.7247–0.7914, respectively; however, the R2CV values obtained from the validation results were 0.7387–0.7837, 0.3280–0.4004, and 0.7427–0.7757, respectively. The optimal models selected for cellulose, lignin, and hemicellulose were C1, L2, and 100-(C1-L2) or H2, respectively. Our predictions for woody and herbaceous biomass, including torrefied samples, should be applied with caution to other biomass types due to the potential accuracy limitations. To enhance the prediction accuracy, future research should broaden the range of biomass types considered and gather more data specifically related to woody and herbaceous biomass. [ABSTRACT FROM AUTHOR]

This document is a compilation of research papers that explore the topics of Smart Cities and Positive Energy Districts (PEDs). The papers cover a range of subjects including energy efficiency, renewable energy communities, smart urban management, and financial schemes for sustainable neighborhoods. The findings emphasize the importance of energy renovation, potential energy and financial savings, and the need for collaborative approaches and policy direction to achieve sustainable urban development. The papers also provide insights into innovative solutions and technological advancements that can contribute to the realization of carbon-neutral and sustainable cities. This document serves as a valuable resource for library patrons conducting research on energy efficiency and sustainable building practices. [Extracted from the article]

This review paper synthesizes the recent advancements in voltage regulation techniques for active distribution networks (ADNs), particularly in contexts with high renewable energy source (RES) penetration, using photovoltaics (PVs) as a highlighted example. It covers a comprehensive analysis of various innovative strategies and optimization algorithms aimed at mitigating voltage fluctuations, optimizing network performance, and integrating smart technologies like smart inverters and energy storage systems (ESSs). The review highlights key developments in decentralized control algorithms, multi-objective optimization techniques, and the integration of advanced technologies such as soft open points (SOPs) to enhance grid stability and efficiency. The paper categorizes these strategies into two main types: analytical methods and computational methods. In conclusion, this review underscores the critical need for advanced analytical and computational methods in the voltage regulation of ADNs with high renewable energy penetration levels, highlighting the potential for significant improvements in grid stability and efficiency. [ABSTRACT FROM AUTHOR]

10.3390/en14102947 3 Pilatowska M., Geise A., Wlodarczyk A. The effect of renewable and nuclear energy consumption on decoupling economic growth from CO2 emissions in Spain. The last article, "Empirical Research on the Relationship amongst Renewable Energy Consumption, Economic Growth and Foreign Direct Investment in Kazakhstan and Uzbekistan", is authored by [[3]]. This editorial paper presents a brief review of the 11 selected papers recently published: nine from I Energies i and two from other journals, and their citations are compared. They examine the associations between foreign direct investment, economic growth, and renewable energy consumption in the case of Kazakhstan and Uzbekistan. [Extracted from the article]

In the context of the global drive towards sustainability and rapid integration of renewables, electric vehicles, and charging infrastructure, the need arises for advanced operational strategies that support the grid while managing the intermittent nature of these resources. Microgrids emerge as a solution, operating independently or alongside the main grid to facilitate power flow management among interconnected sources and different loads locally. This review paper aims to offer a comprehensive overview of the different control strategies proposed in the literature to control microgrids with electric vehicle charging stations. The surveyed research is primarily categorized according to the employed control algorithms, although distinctions are also made based on defined microgrid architecture, utilization of specific power sources, and charging stations configurations. Additionally, this paper identifies research gaps in the current research. These gaps encompass the use of oversimplified models for charging stations and/or renewable sources operation, limited simulation time periods, or lack of experimental testing of proposed approaches. In the light of these identified shortcomings, this manuscript presents recommendations for guiding future research. [ABSTRACT FROM AUTHOR]

The efficient utilization of low-cost carbon feedstocks, such as municipal solid waste (MSW), in biorefineries has become increasingly important for reducing GHG emissions and meeting the growing demand for renewable energy sources. However, MSW as a feedstock presents several challenges, including high moisture content, compositional variability, particle size and shape, density, and ash content. To address these challenges, the potential of mechanical dewatering and high-moisture pelleting processes for densifying MSW fractions, such as paper, cardboard, thin plastic, and thick plastic, into low-cost carbon feedstocks with improved handling and conversion properties were investigated. The effect of these preprocessing technologies on the critical quality attributes (CQAs) of the resulting pellets, including bulk density, durability, and size uniformity, were evaluated. The results showed that with these preprocessing technologies, the paper and cardboard fractions could be pelleted at moisture contents over 40% (w.b.) while achieving >99% durability and >300 kg/m3, while the high moisture plastic fractions were not suitable for pelleting. The thick plastic fraction processed in a screw press was shown to remove up to 30% of the moisture content in a single pass. These findings suggest that these mechanical preprocessing technologies can improve the physical properties of low-cost municipal solid waste fractions for biofuels production. [ABSTRACT FROM AUTHOR]

The green port multi-energy microgrid, featuring renewable energy generation, hydrogen energy, and energy storage systems, is an important gateway to achieve the net-zero emission goal. But there are many forms of energy in green port multi-energy microgrid systems, the power fluctuates frequently, and the port loads with large fluctuations and fast changes. These factors can easily lead to the problem of the state of charge exceeding the limit of the energy storage system. To distribute the fluctuating power in the green port multi-energy microgrid system reasonably and maintain the state of charge (SOC) of the hybrid energy storage system in an moderate range, an energy management strategy (EMS) based on dual-stage fuzzy control with a low pass-filter algorithm is proposed in this paper. First, the mathematical model of a green port multi-energy microgrid system is established. Then, fuzzy rules are designed, and the dual-stage fuzzy controller is used to change the time constant of the low-pass filter (LPF) and modify the initial power distribution by an LPF algorithm. Finally, simulation models are built in Matlab 2016a/Simulink. The simulation results demonstrate that, compared with other algorithms under the control of the EMS proposed in this paper, the high-frequency component in the flywheel power is smaller, and the SOC of the supercapacitor is maintained in a reasonable range of 34–78%, which extends the lifespan of the flywheel and supercapacitor. Additionally, it has a faster automatic adjustment ability for the state of charge of the energy storage system, which is conducive to better maintaining the stable operation of green port multi-energy microgrid systems. [ABSTRACT FROM AUTHOR]

Civil aviation significantly contributes to "hard-to-abate" emissions, responsible for 2% of global CO2 emissions. This paper examines the most effective policies to promote Sustainable Aviation Fuels (SAFs) in Italy, using a multi-level policy analysis and a stakeholder-based case study approach. The policies reviewed comprise the international, European, and national level. The paper analyses at the international level, ICAO CORSIA and, at the European level, the Renewable Energy Directive (RED), ReFuel EU, and the EU Emissions Trading System (EU ETS) for aviation. Italy has not yet implemented specific policies targeting SAF transition, which is challenging due to commercialization issues and policy inconsistencies. These include the price gap between SAF and conventional fuels, different definitions adopted, and environmental objectives pursued with respect to sustainable fuels by ICAO and the EU. Other challenges include double-counting risks and fuel tankering practices. This article contributes to Italy's SAF policymaking by developing a stakeholder-based quantitative survey, whose results suggest that three measures are key: tax subsidies for technology and infrastructure users, tax credits for upgrading production infrastructure, and tax breaks for SAF-using companies, fuel handlers, and distributors. [ABSTRACT FROM AUTHOR]

This paper presents a comprehensive bibliometric review and visualization of smart and sustainable energy consumption, delving into the challenges and opportunities of developing renewable and non-renewable energy sources. The study examines research trends and emerging themes about integrating smart solutions and sustainable energy resource consumption. The analytical methods used involve thoroughly analyzing empirical data, case studies, and review papers to map the research landscape. The results highlight dominant research topics, influential authors, and publication timelines in this field. The review identifies the key challenges in harnessing renewable and non-renewable energy sources, including the need for reliable energy sources, energy storage systems, and smart grid technologies. The paper concludes with insights into the most effective practices for promoting smart and energy-efficient methods while emphasizing the complexity of sustainable energy solutions. [ABSTRACT FROM AUTHOR]

The European Union, in pursuit of the goal of reducing emissions by at least 55% by 2030 and achieving climate neutrality by 2050, is deploying different actions, with industry decarbonization as a key strategy. However, increasing electricity demand requires an intensification of energy generation from clean technologies, and the energy system's expansion is hindered by renewable generation's climatic dependencies and the imperative for substantial electrical infrastructure investments. Although the transmission grid is expected to grow, flexibility mechanisms and innovative technologies need to be applied to avoid an overwhelming growth. In this context, this paper presents a thorough assessment, conducted within the FLEXINDUSTRIES project, of the flexibility potential across seven energy-intensive industries (automotive industry, biofuel production, polymer manufacturing, steel manufacturing, paper mills, pharmaceutical industry, and cement production). The methodology followed during the analysis entails reviewing the state-of-the-art existing flexibility mechanisms, industries' energy markets engagement, and technical/operational readiness. The results highlight the feasibility of the proposed actions for enabling energy market flexibility through demand-response programs, quantifying energy opportunities, and pinpointing regulatory and technical barriers. [ABSTRACT FROM AUTHOR]

The transition process from fossil fuels to environmentally friendly renewable energy sources carries the risk of creating new environmental damages. Photovoltaic technology represents one of the alternatives with the least risk of harmful environmental impact. However, this technology has two important drawbacks: the significant land occupation for the installation of PV systems and the uncontrollability of production. By constructing floating photovoltaic plants on hydroelectric reservoirs, both of these problems can be reduced to an acceptable level. Some artificial reservoirs, originally built for hydroelectric power plants, have acquired a significant secondary function as recreational areas and fish breeding sites. Therefore, there is justified resistance from the local community to change the existing appearance and purpose of such reservoirs. This paper proposes a completely new concept of integrating the interests of the local community into such objects. In addition to preserving existing uses, the concept also offers new features. This can make the entire system environmentally friendly and sustainable. This paper details the technology behind the construction of floating photovoltaic power plants on artificial reservoirs and emphasizes their various advantages. These benefits include the non-utilization of cultivable land, the ease of assembly and construction, integration into existing power grids, and the potential to address electricity storage issues. For instance, Buško Lake, covering an area of 55.8 km2, may host 2.93 km2 of installed floating photovoltaic (FPV) facilities, enabling a total installed capacity of 240 MW. With an average of 5.5 h of daily sunshine, this totals 2007 annual hours, equivalent to a 55 MW thermal power plant. An analysis showed that, with losses of 18.2%, the average annual production stands at 302 G W h , translating to an annual production value of 18 million € at 60 €/MWh. The integration of this production into an existing hydroelectric power plant featuring an artificial reservoir might boost its output by 91%. The available transmission line capacity of 237 MW is shared between the hydroelectric power plant (HPP) and FPV; hence during the FPV maximum power generation time, the HPP halts its production. HPP Orlovac operates a small number of hours annually at full capacity (1489 h); therefore in combination with the FPV, this number can be increased to 2852 h. This integration maintains the lake's functions in tourism and fishing while expanding its capabilities without environmental harm. [ABSTRACT FROM AUTHOR]

Full- and reduced-order observers have been used in many engineering applications, particularly for energy systems. Applications of observers to energy systems are twofold: (1) the use of observed variables of dynamic systems for the purpose of feedback control and (2) the use of observers in their own right to observe (estimate) state variables of particular energy processes and systems. In addition to the classical Luenberger-type observers, we will review some papers on functional, fractional, and disturbance observers, as well as sliding-mode observers used for energy systems. Observers have been applied to energy systems in both continuous and discrete time domains and in both deterministic and stochastic problem formulations to observe (estimate) state variables over either finite or infinite time (steady-state) intervals. This overview paper will provide a detailed overview of observers used for linear and linearized mathematical models of energy systems and review the most important and most recent papers on the use of observers for nonlinear lumped (concentrated)-parameter systems. The emphasis will be on applications of observers to renewable energy systems, such as fuel cells, batteries, solar cells, and wind turbines. In addition, we will present recent research results on the use of observers for distributed-parameter systems and comment on their actual and potential applications in energy processes and systems. Due to the large number of papers that have been published on this topic, we will concentrate our attention mostly on papers published in high-quality journals in recent years, mostly in the past decade. [ABSTRACT FROM AUTHOR]

Aiming at the problem of source-load uncertainty caused by the increasing penetration of renewable energy and the large-scale integration of electric vehicles (EVs) into modern power system, a robust optimal operation scheduling algorithm for regional integrated energy systems (RIESs) with such uncertain situations is urgently needed. Based on this background, aiming at the problem of the irregular charging demand of EV, this paper first proposes an EV charging demand model based on the trip chain theory. Secondly, a multi-RIES optimization operation model including a shared energy storage station (SESS) and integrated demand response (IDR) is established. Aiming at the uncertainty problem of renewable energy, this paper transforms this kind of problem into a dynamic robust optimization with time-varying parameters and proposes an improved robust optimization over time (ROOT) algorithm based on the scenario method and establishes an optimal scheduling mode with the minimum daily operation cost of a multi-regional integrated energy system. Finally, the proposed uncertainty analysis method is verified by an example of multi-RIES. The simulation results show that in the case of the improved ROOT proposed in this paper to solve the robust solution of renewable energy, compared with the traditional charging load demand that regards the EVs as a whole, the EV charging load demand based on the trip chain can reduce the cost of EV charging by 3.5% and the operating cost of the multi-RIES by 11.7%. With the increasing number of EVs, the choice of the starting point of the future EV trip chain is more variable, and the choice of charging methods is more abundant. Therefore, modeling the charging demand of EVs under more complex trip chains is the work that needs to be studied in the future. [ABSTRACT FROM AUTHOR]

10.3390/en13143519 15 Yang R., Yuan Y., Ying R., Shen B., Long T. A novel energy management strategy for a ship's hybrid solar energy generation system using a particle swarm optimization algorithm. Unfortunately, the paper does not take into account the fragility of the European Energy System with respect to the Energy suppliers. Moreover, the Energy Plant is strongly constrained by the primary energy providers and the energy distribution system must provide the difficult tasks related to implement dispatching and energy saving systems. 10.3390/en13040894 10 Nikolaou T., Stavrakakis G.S., Tsamoudalis K. Modeling and optimal dimensioning of a pumped hydro energy storage system for the exploitation of the rejected wind energy in the non-interconnected electrical power system of the Crete island, Greece. [Extracted from the article]

The widely recognised Energiewende, ("energy transition") in Germany has lost its original momentum. We therefore address the question of how the transition process to a new energy system can be reignited. To do so, we developed the "5Ds approach", which lays the groundwork for a process analysis and the identification of important catalysts and barriers. Focusing on the five major fields required for the energy transition, we analyse the effects of: (1) Decarbonisation: How can efficiency and renewable energies be expanded successfully? (2) Digitalisation: Which digital solutions facilitate this conversion and would be suitable as sustainable business models? (3) Decentralisation: How can potential decentralised energy and efficiency opportunities be developed? (4) Democratisation: How can participation be strengthened in order to foster acceptance (and prevent "yellow vest" protests, etc.)? (5) Diversification of service: Which services can make significant contributions in the context of flexible power generation, demand-side management, storage and grids? Our paper comes to the conclusion that German policy efforts in the "5D" fields have been implemented very differently. Particularly with regard to democratisation, the opportunities for genuine participation among the different social actors must be further strengthened to get the Energiewende back on track. New market models are needed to meet the challenges of the energy transition and to increase the performance of "5D" through economic incentives. [ABSTRACT FROM AUTHOR]

To advance carbon neutrality policies, many countries are increasingly integrating Renewable Energy Sources (RESs) into their energy mix. However, for harnessing natural energy in power generation, RESs present challenges in output control, potentially leading to power imbalances. Such imbalances, when coupled with an excessive reliance on unpredictable RES, may necessitate the curtailment of grid-integrated renewable generation, halting production despite available capacity. This paper proposes strategies to mitigate the economic and operational efficiency impacts of increased RESs on the power grid. It focuses on the optimal operation of Battery Energy Storage Systems (BESSs) and Power to Gas (P2G) technology, which flexibly converts surplus electricity into hydrogen. By employing Mixed Integer Linear Programming (MILP) for optimization and Stochastic Programming (SP) for the management of the uncertainty of renewable energy output, this paper evaluates the anticipated benefits of BESS and P2G applications. [ABSTRACT FROM AUTHOR]

With the rapid development of renewable energy and the increasing maturity of energy storage technology, microgrids are quickly becoming popular worldwide. The stochastic scheduling problem of microgrids can increase operational costs and resource wastage. In order to reduce operational costs and optimize resource utilization efficiency, the real-time scheduling of microgrids becomes particularly important. After collecting extensive data, reinforcement learning (RL) can provide good strategies. However, it cannot make quick and rational decisions in different environments. As a method with generalization ability, meta-learning can compensate for this deficiency. Therefore, this paper introduces a microgrid scheduling strategy based on RL and meta-learning. This method can quickly adapt to different environments with a small amount of training data, enabling rapid energy scheduling policy generation in the early stages of microgrid operation. This paper first establishes a microgrid model, including components such as energy storage, load, and distributed generation (DG). Then, we use a meta-reinforcement learning framework to train the initial scheduling strategy, considering the various operational constraints of the microgrid. The experimental results show that the MAML-based RL strategy has advantages in improving energy utilization and reducing operational costs in the early stages of microgrid operation. This research provides a new intelligent solution for microgrids' efficient, stable, and economical operation in their initial stages. [ABSTRACT FROM AUTHOR]

Energy security is a main challenge in today's economies [[1]]. Bielowicz in the paper entitled "Petrographic Characteristics of Coal Gasification and Combustion By-Products from High Volatile Bituminous Coal" showed the benefits of coal gasification in a fluidized bed reactor with CO SB 2 sb as a gasifying agent at the temperature 889-980 °C [[18]]. Among the clean coal technologies, the new, innovative thermochemical conversion of coal technologies such a (combustion, gasification, pyrolysis, and hydrogenation) and co-gasification with biomass/biowaste/sewage sludge will be discussed. In this special issue "The effectiveness of clean coal technologies in global carbon dioxide mitigation", seven research papers were published as examples of recent developments in widely understand area of clean thermochemical conversion of fossil fuels with maximization of CO SB 2 sb emission reduction. [Extracted from the article]

Charging electric vehicles (EVs) is of great concern both for future vehicle owners and grid operators, with charging at home being the preferred solution by 90% of owners. In addition, the supplied electricity needs to be clean in order to reduce emissions. This paper presents solutions for charging EVs at home using renewable electricity that fulfils such needs. It discusses: (1) the current landscape; (2) the latest hardware developments in the fields of renewable sources and storage; (3) software optimization for home energy management; (4) residential charging station standards and incentives offered by governments; (5) the evolution towards designing smart homes with low energy consumption from the grid; (6) case studies of particular interest. [ABSTRACT FROM AUTHOR]

The research aims were to construct an air-breathing paper-based microfluidic fuel cell (paper-based μ FC) and to evaluated it with different soft drinks to provide energy for their prospective use in portable devices as an emergency power source. First, in a half-cell configuration, cyclic voltammetry showed that glucose, maltose, and fructose had specific oxidation zones in the presence of platinum-ruthenium on carbon (PtRu/C) when they were individual. Still, when they were mixed, glucose was observed to be oxidized to a greater extent than fructose and maltose. After, when a paper-based μ FC was constructed, PtRu/C and platinum on carbon (Pt/C) were used as anode and cathode, the performance of this μ FC was mostly influenced by the concentration of glucose present in each soft drink, obtaining maximum power densities at room temperature of 0.061, 0.063, 0.060, and 0.073 mW cm − 2 for Coca Cola ® , Pepsi ® , Dr. Pepper ® , and 7up ® , respectively. Interestingly, when the soft drinks were cooled, the performance was increased up to 85%. Furthermore, a four-cell stack μ FC was constructed to demonstrate its usefulness as a possible power supply, obtaining a power density of 0.4 mW cm − 2 , using Coca Cola ® as fuel and air as oxidant. Together, the results of the present study indicate an alternative application of an μ FC using soft drinks as a backup source of energy in emergencies. [ABSTRACT FROM AUTHOR]

Additive manufacturing (AM) offers unique capabilities in terms of design freedom and customization, contributing to sustainable manufacturing. However, energy efficiency remains a challenge in the widespread adoption of AM processes. In this paper, we present a comprehensive review of the current research on energy efficiency in AM, addressing challenges, opportunities, and future directions. Our analysis reveals a lack of standardization in the measurement and reporting of energy consumption, making it difficult to evaluate and compare the energy performance of various systems. We propose a holistic framework to address energy efficiency throughout the entire life cycle of the AM process, highlighting the importance of design optimization, material selection, advanced control systems, and energy management strategies. The paper also emphasizes the need for further research on the interactions between process parameters, along with the potential of integrating renewable energy sources into AM systems. This review offers valuable insights for both academics and industry professionals, calling for standardized methodologies and a focus on energy management to optimize energy efficiency in AM processes, ultimately enhancing competitiveness and sustainability in modern manufacturing. [ABSTRACT FROM AUTHOR]

The global energy sector is in a period of transition, during which time it is expected that renewable and low-carbon energy sources, such as wind and solar, will replace traditional fossil fuels, including oil, gas, and coal. The energy transition is happening not only to limit the environmental impact of fossil fuel production and consumption but also to ensure energy security, reliability, access, affordability, and sustainability. The importance of the energy transition has been amplified by recent events, notably the Russian-Ukraine conflict. Economic, financial, and trade sanctions against Russia, and in particular its oil and gas industry, have forced countries to find new suppliers in the short term, but also to investigate new and more sustainable sources to guarantee long-term energy security. Given the importance of energy, it is perhaps not unexpected that there is a considerable body of recent academic literature, particularly over the last 4–5 years, studying what industries, consumers, governments, and markets can do to help bring about a faster energy transition. In this paper, we provide a review of the literature that pertains to the economic aspects of the energy transition. While our initial search of the literature is targeted at uncovering all relevant articles on the subject, we focus most of our discussion on the most influential articles in prominent journals and articles published in this journal—Energies. This review is intended to help identify active topics and potential research gaps and provide future direction, so we hope it will prove useful to the readers and authors interested in this topic. [ABSTRACT FROM AUTHOR]

Microgrids have increased in popularity thanks to both the integration of renewable energy resources and their energy distribution capability for remote locations. Moreover, the microgrids, mainly using multiple generators connected in parallel, acquire additional advantages by using both Hot-Swap and Current-Sharing techniques. This paper presents the development of a Hardware in the Loop platform to test Current-Sharing algorithms. It is reinforced that the use of a real-time simulation based on Hardware in the Loop is a viable and cost-effective alternative in the validation of controllers. The platform was developed in a graphical programming environment (LabVIEW 2015) and implemented with NI MyRIO 1900 (National Instruments Corp., Austin, TX, USA) development boards for easier reproducibility. The entire code project is openly available and provided in this paper. A system of photovoltaic energy generators was used to evaluate the performance of the HIL platform. As a result, the platform was able to reproduce a similar behavior to the photovoltaic generator, presenting average mean errors of 0.4 V and 0.2 A in its voltage and current, respectively. Additionally, the platform showed its capability to test Current-Sharing algorithms in the occurrence of Hot-Swap events. This work contributes with a validation tool for energy management systems applied to microgrids. [ABSTRACT FROM AUTHOR]

The present paper illustrates the results of an experimental study aimed at evaluating the effect of lubricant oil features on the emissive behaviour of a heavy duty spark ignition engine fuelled with methane. The activity was performed within a research project between CNR-STEMS and TotalEnergies in which oils with different formulations were characterized, focusing on their potentiality in particle emission reduction. Considering the ultralow particle emission level in the exhaust of gas engines, a specific testing procedure was designed to guarantee highly reliable and accurate results. In particular, the engine was operated under transient conditions, along the World Harmonized Transient Cycle in cold- and hot-start conditions. The results of the test campaign clearly highlight that the lubricant formulation is a key technology for the control of particles, revealing this as an important aspect in view of the upcoming severe regulation limits on particle emissions. The experimental findings show the capability of reformulated oils to drop down the total particle number to 60–70% with respect to a baseline standard oil. The interest in the present study also lies in providing information extendable to more sustainable fuels, like hydrogen or biomethane, nowadays of great interest as alternative energy sources. [ABSTRACT FROM AUTHOR]

This paper addresses the growing challenges and developments in frequency control within power systems influenced by the increasing penetration of renewable energy sources. It evaluates the advancements and limitations of renewable-based control technologies and explores the critical role of diverse energy storage technologies in providing fast frequency response ancillary services. Through a comprehensive analysis of the global literature, this paper categorises energy storage solutions according to their efficacy in meeting fast frequency response demands and potential for revenue generation. It reveals significant gaps in the current research, which predominantly focuses on battery energy storage systems and microgrid applications, with insufficient attention to grid-scale storage solutions and innovative energy storage technologies. This analysis identifies a lack of detailed technical simulations and hybrid storage models for frequency control, as well as a minimal exploration of the environmental benefits, particularly in terms of carbon dioxide emission reductions, associated with deploying new energy storage technologies in ancillary service markets. The paper concludes by emphasising the urgent need for further research incorporating detailed techno-economic evaluations and the carbon dioxide reduction potential of modular, scalable energy storage technologies, which should be facilitated by advanced network simulation models and comprehensive market analysis to drive future advancements in the field. [ABSTRACT FROM AUTHOR]

With a substantial fraction of renewable energy integrated into the electrical grid, the new power system urgently requires grid planning scheme displaying adaptability to different energy types and their volatility. Considering the indeterminacy of renewable energy generation output and the different attitudes of decision-makers towards its risk, this paper proposes an adaptability assessment methodology for power grid planning schemes considering multiple decision psychology. First, an evaluation indicator framework is established based on the adaptive requirements of the grid planning for novel power system, and the weights of indicators are calculated based on an improved AHP-CRITIC combination weighting method. Second, improved cumulative prospect theory (ICPT) is adopted to improve to the calculation method of the distance between the evaluation program and the positive and negative ideal programs in the GRA and TOPSIS, which effectively characterize the different decision-making psychologies, and a combination evaluation model is constructed based on a cooperative game (CG), namely, an adaptability evaluation model of grid planning schemes for novel power systems based on GRA-TOPSIS integrating CG and ICPT. Finally, the proposed model serves to evaluate grid planning schemes of three regions in China's 14th Five-Year Plan. The evaluation results show that the adaptability of the schemes varies under different decision-making psychologies, and under the risk-aggressive and loss-sensitive decision-making psychologies, grid planning scheme of Region 1 with the greatest accommodation capacity of renewable energy is preferable. [ABSTRACT FROM AUTHOR]

This paper surveys the energy literature and systematically reviews the path to an inclusive and sustainable energy transition by exploring factors that drive the current energy transitions, countries with advanced energy transition programs, and the roles of energy literacy and justice in energy transition. Utilizing an exhaustive literature search from 2001 to 2023 via the Scopus database, the study identifies strong policy frameworks, technological advancements, economic incentives, and international collaborations as pivotal factors in successful energy transitions. Case studies from the Nordic countries, Germany, and Poland highlight diverse approaches and significant progress, revealing valuable lessons for global application. Although energy literacy emerges as crucial for public acceptance and participation, fostering informed decision-making and supportive behaviors toward renewable energy initiatives, energy justice ensures equitable access to the benefits of energy transitions, addressing socio-economic impacts on marginalized communities. The study identifies a scarcity of research that articulates and integrates energy literacy and justice concurrently within the purview of energy transition. The paper recommends the adoption, integration, and institutionalization of frameworks that concurrently propagate energy literacy and guide fair and equitable energy transitions. The frameworks should encourage active community involvement, promote community ownership of renewable energy projects, ensure transparency and inclusivity, implement measures for equitable economic benefits, protect livelihoods, address historical distrust, and leverage social media to promote energy literacy and justice. Finally, the continuous monitoring and evaluation of energy transition initiatives are crucial to ensure that they meet evolving societal needs and environmental goals. [ABSTRACT FROM AUTHOR]

Renewable energy has emerged as a promising solution to address the challenges of climate change, energy security, and socio-economic development. South Africa, with its abundant renewable energy resources, has made significant strides in the utilization of renewable energy over the past decade. This paper provides a comprehensive review of the progress of renewable energy advancement in South Africa, examining the policies, initiatives, and achievements in various renewable energy sectors. This study explores the country's transition from a heavily coal-dependent energy system to a diversified and sustainable energy mix. It analyses the growth of renewable energy technologies, such as wind power and solar photovoltaic (PV), highlighting the key milestones, challenges, and opportunities. Furthermore, this paper discusses the role of government support, regulatory frameworks, and private sector investments in driving renewable energy deployment in South Africa. Finally, it identifies the prospects and potential areas for further advancement in the renewable energy sector. This review aims to contribute to the understanding of South Africa's renewable energy journey and provides valuable insights for policy-makers, researchers, and stakeholders involved in the sustainable energy transition. [ABSTRACT FROM AUTHOR]

Under the background of building a new-type power system, as the core of the energy system, the restructuring of the power system will inevitably have a linked impact on the coordinated development of the economy–energy–environment system. A "Dual Triangle" theoretical framework consisting of the "Energy Impossibility Triangle" and "Sustainable Development Triangle" was constructed in this paper. By combining historical statistical analysis with scenario predictive analysis, the historical characteristics of the "Dual Triangle" and future trends under different scenarios were analyzed, and the coupled interaction relationship of the "Dual Triangle" was also studied. Conclusions were as follows: The energy system gradually inclined towards economy and cleanliness from 2010 to 2022, and the operation status of the "Dual Triangle" was stable. A positive coupling relationship within the "Dual Triangle" in vigorously promoting renewable energy scenarios is close, which can be regarded as the preferred path for the reconstruction of the power system. The security and low-carbon phased development scenario is a development model that dynamically mitigates the challenges of the "Energy Impossibility Triangle". Security has become the core contradiction of the "Energy Impossibility Triangle". This paper conducts an integrated and innovative application of the "Dual Triangle" theory and provides a case basis for how to achieve the coupled interaction of the "Dual Triangle". [ABSTRACT FROM AUTHOR]

In recent decades, Saudi Arabia has experienced a significant surge in energy consumption as a result of population growth and economic expansion. This has presented utility companies with the formidable challenge of upgrading their facilities and expanding their capacity to keep pace with future energy demands. In order to address this issue, there is an urgent need to implement energy-saving solutions such as energy storage systems (ESSs) and renewable energy sources, which can help to reduce demand during peak hours. To ensure optimal use of ESSs, it is crucial to integrate a load forecasting model with the ESS in order to control charging and discharging rates and schedules. The irregular load profile is a particularly significant consumer of energy, consuming approximately 2.5 GWh annually at the cost of USD 3 billion in Saudi Arabia. In light of this, this paper develops a load forecasting model for the irregular load profile with a high degree of accuracy: achieving 95%. One of the key applications of this model is load peak shaving. Given the region's abundance of solar irradiation, the paper propose an integration of a solar PV system with a battery energy storage system (BESS) and analyzes various scenarios to determine the efficacy of the proposed approach. The results demonstrate significant savings when the proposed forecasting model is integrated with a BESS and PV system, with the potential to reduce monthly imported power by more than 22% during the summer season. [ABSTRACT FROM AUTHOR]

South Africa is currently experiencing an energy crisis because of a mismatch between energy supply and demand. Increasing energy demand necessitates the adequate operation of generation and transmission facilities to maintain the reliability of the power system. Transmission line compensation is used to increase the ability to transfer power, thereby enhancing system stability, voltage regulation, and reactive power balance. Also, in recent years, the introduction of renewable energy sources (RES) has proven to be effective in supporting the grid by providing additional energy. As a result, the dynamics of power systems have changed, and many developing nations are adopting the integration of renewable energy into the grid to increase the aspect ratio of the energy availability factor. While both techniques contribute to the grid's ability to meet energy demand, they frequently introduce technical challenges that affect the stability and protection of the systems. This paper provides a comprehensive review of the challenges introduced by transmission line compensation and the integration of renewable energy, as well as the various techniques proposed in the literature to address these issues. Different compensation techniques, including fault detection, classification, and location, for compensated and uncompensated transmission lines, including those connected to renewable energy sources, are reviewed. This paper then analyzes the adaptive distance protection schemes available in the literature to mitigate the impact of compensation/integration of RES into the grid. Based on the literature reviewed, it is essential for protection engineers to understand the dynamics introduced by network topology incorporating a combination of RES and heavily compensated transmission lines. [ABSTRACT FROM AUTHOR]

In the context of increasing energy demands and the integration of renewable energy sources, this review focuses on recent advancements in energy storage control strategies from 2016 to the present, evaluating both experimental and simulation studies at component, system, building, and district scales. Out of 426 papers screened, 147 were assessed for eligibility, with 56 included in the final review. As a first outcome, this work proposes a novel classification and taxonomy update for advanced storage control systems, aiming to bridge the gap between theoretical research and practical implementation. Furthermore, the study emphasizes experimental case studies, moving beyond numerical analyses to provide practical insights. It investigates how the literature on energy storage is enhancing building flexibility and resilience, highlighting the application of advanced algorithms and artificial intelligence methods and their impact on energy and financial savings. By exploring the correlation between control algorithms and the resulting benefits, this review provides a comprehensive analysis of the current state and future perspectives of energy storage control in smart grids and buildings. [ABSTRACT FROM AUTHOR]

Wind energy, as a key link in renewable energy, has seen its penetration in the power grid increase in recent years. In this context, accurate and reliable short-term wind power prediction is particularly important for the real-time scheduling and operation of power systems. However, many deep learning-based methods rely on the relationship between wind speed and wind power to build a prediction model. These methods tend to consider only the temporal features and ignore the spatial and frequency domain features of the wind power variables, resulting in poor prediction accuracy. In addition to this, existing power forecasts for wind farms are often based on the wind farm level, without considering the impact of individual turbines on the wind power forecast. Therefore, this paper proposes a wind power prediction model based on multi-feature domain learning (MFDnet). Firstly, the model captures the similarity between turbines using the latitude, longitude and wind speed of the turbines, and constructs a turbine group with similar features as input based on the nearest neighbor algorithm. On this basis, the Seq2Seq framework is utilized to achieve weighted fusion with temporal and spatial features in multi-feature domains through high-frequency feature extraction by DWT. Finally, the validity of the model is verified with data from a wind farm in the U.S. The results show that the overall performance of the model outperforms other wind farm power prediction algorithms, and reduces MAE by 25.5% and RMSE by 20.6% compared to the baseline persistence model in predicting the next hour of wind power. [ABSTRACT FROM AUTHOR]

System strength is both supplied and demanded in a power system during normal operations and in the presence of disturbances. This is characterised by stable voltage and frequency, supporting renewable generation such as wind and solar. Because the retirement of synchronous generators reduces system strength supply, and the connection of new inverter-based resource (IBR) generators increases demand, there is an urgent need for new sources of system strength. This paper provides an overview of the challenges brought about by grid modernisation. It highlights tangible solutions provided by synchronous condensers (SCs) to bolster grid strength, stability, and reliability while accommodating the rising influx of renewable energy sources (RESs). Furthermore, this paper examines the role of SCs in improving weak grids, voltage control, power quality, short-circuit levels, and inertia management. It introduces the role of innovative hybrid synchronous condenser (HSC) systems to boost grid reliability and resilience. It also elaborates on the optimisation strategies for SC sizing, placement, and control and outlines economic aspects of their deployment. The review also highlights future directions and challenges in SC technology, emphasising the need for ongoing research and development to enhance system design and operation. [ABSTRACT FROM AUTHOR]

With the growing adoption of battery energy storage systems in renewable energy sources, electric vehicles (EVs), and portable electronic devices, the effective management of battery systems has become increasingly critical. The advent of wireless battery management systems (wBMSs) represents a significant innovation in battery management technology. Traditional wired battery management systems (BMSs) face challenges, including complexity, increased weight, maintenance difficulties, and a higher chance of connection failure. In contrast, wBMSs offer a robust solution, eliminating physical connections. wBMSs offer enhanced flexibility, reduced packaging complexity, and improved reliability. Given that wBMSs are still in a preliminary stage, this review paper explores their evolution, current state, and future directions. A comprehensive survey of state-of-the-art wBMS technologies, including academic and commercial solutions, is elaborated in this paper. We compare wireless communication technologies like Bluetooth Low Energy (BLE), Zigbee, Near-Field Communication (NFC), Wi-Fi, and cellular networks in the context of wBMSs. We discuss their performance in terms of efficiency, reliability, scalability, and security. Despite its promising outlook, wBMSs still face challenges such as data security, signal interference, regulatory and standardization issues, and competition from the continued advancement of wired BMS technologies, making the advantages of wBMSs less evident. This paper concludes with guidelines for future research and development of wBMSs, aiming to address these challenges and pave the way for a broad adoption of wBMSs across various applications. This paper aims to inspire further research and innovation in the field, contributing to developing an industry-ready wBMS. [ABSTRACT FROM AUTHOR]

Accelerating the transition to a cleaner global energy system is essential for tackling the climate crisis, and green hydrogen energy systems hold significant promise for integrating renewable energy sources. This paper offers a thorough evaluation of green hydrogen's potential as a groundbreaking alternative to achieve near-zero greenhouse gas (GHG) emissions within a renewable energy framework. The paper explores current technological options and assesses the industry's present status alongside future challenges. It also includes an economic analysis to gauge the feasibility of integrating green hydrogen, providing a critical review of the current and future expectations for the levelized cost of hydrogen (LCOH). Depending on the geographic location and the technology employed, the LCOH for green hydrogen can range from as low as EUR 1.12/kg to as high as EUR 16.06/kg. Nonetheless, the findings suggest that green hydrogen could play a crucial role in reducing GHG emissions, particularly in hard-to-decarbonize sectors. A target LCOH of approximately EUR 1/kg by 2050 seems attainable, in some geographies. However, there are still significant hurdles to overcome before green hydrogen can become a cost-competitive alternative. Key challenges include the need for further technological advancements and the establishment of hydrogen policies to achieve cost reductions in electrolyzers, which are vital for green hydrogen production. [ABSTRACT FROM AUTHOR]

This paper presents the design and performance of an energy subsystem (ES) dedicated to hybrid energy harvesters (HEHs): wave energy converters (WECs) combined with photovoltaic panels (PVPs). The considered ES is intended for compact HEHs powering autonomous end-node devices in distributed IoT networks. The designed ES was tested experimentally and evaluated in relation to the mobile and wireless distributed communication use case. The numerical evaluation was based on the balance of the harvested energy versus the energy consumed in the considered use case. The evaluation results proved that the ES ensured energy surplus over the considered IoT node consumption. It confirmed the proposed solution as convenient to the compact HEHs applied for sustainable IoT devices to power them with renewable energy harvested from light and sea waves. It was found that the proposed ES can provide the energy autonomy of the IoT end node and increase its reliability through a hybrid energy-harvesting approach. [ABSTRACT FROM AUTHOR]

With the increasing use of renewable energy sources and decentralized power systems, certain challenges have emerged in meeting consumers' electrical energy demands. The intermittent nature of renewable energy generation means that it cannot always align with consumers' needs, resulting in periods of excess energy production when it is not required. To bridge this gap between production and consumption, energy storage systems are necessary. This paper defines the work of an isolated microgrid, which consists of renewable sources (wind and PV) for energy production, households with electric vehicles as consumers, and a combined storage system. This storage system is made from batteries, hydrogen storage, and a control system that defines the best use of the storage. Stored energy is utilized through fuel cells to generate electricity for consumption when renewable sources cannot meet the demand. This paper presents the principles of electrolysis and models of individual elements within such a system, as well as the definition and principle of control of the system functionality based on rules and conditions. The proposed control system aims to increase the energy storage lifecycle by deciding when and how to utilize which type of storage and define a self-sufficient microgrid based on renewable sources of production. An economic analysis of the storage part of the system was carried out in which the levelized cost of energy stored and the NPC of the storage systems are calculated. A simulation of the system's operation is conducted using one-hour measurements of wind turbines, solar panels, and household consumption in Serbia. To analyze the system's behavior, a one-week time horizon is considered. [ABSTRACT FROM AUTHOR]

The electrification of society, increasing renewable energy sources and mobility charging lead to new loading patterns for power transformers. Dynamic load conditions induce enhanced mechanical stress on the transformers' windings, potentially causing degradation of the solid insulation over time and compromising the transformer's short-circuit withstand capability. Thermal expansion of the windings, caused by losses in the copper conductors, occurring as the transformer is loaded, increases the stress. Conversely, magnetic losses in the core and tie plate expansion contribute to a reduction in stress. This paper presents the effect of step changes in core losses and copper losses by on-line measurements of the clamping pressure, to better understand the mechanical stresses acting upon the solid insulation cellulose materials. Energisation is found to decrease the clamping pressure following warming up of the transformer, and loading the transformer increased the pressure as the windings increased in temperature. The converse effect was found when unloading and de-energising. The on-line monitoring system provides a new and important step towards ensuring the short-circuit performance of power transformers. [ABSTRACT FROM AUTHOR]

The increasingly extensive use of non-linear loads, mostly including static power converters, in large industry, commercial, and domestic applications, as well as the spread of renewable energy sources in distribution-generated units, make the use of the most efficient power quality improvement systems a current concern. The use of active power filters proved to be the most advanced solution with the best compensation performance for harmonics, reactive power, and load unbalance. Thus, issues related to improving the power quality through active power filters are very topical and addressed by many researchers. This paper presents a topical review on the shunt active power filters in three-phase, three-wire systems. The power circuit and configurations of shunt active filtering systems are considered, including the multilevel topologies and use of advanced power semiconductor devices with lower switching losses and higher switching frequencies. Several compensation strategies, reference current generation methods, current control techniques, and DC-voltage control are pointed out and discussed. The direct power control method is also discussed. New advanced control methods that have better performance than conventional ones and gained attention in the recent literature are highlighted. The current state of renewable energy sources integration with shunt active power filters is analyzed. Concerns regarding the optimum placement and sizing of the active power filters in a given power network to reduce the investment costs are also presented. Trends and future developments are discussed at the end of this paper. For a rigorous substantiation, more than 250 publications on this topic, most of them very recent, constitute the basis of bibliographic references and can assist readers who are interested to explore the subject in greater detail. [ABSTRACT FROM AUTHOR]

With the high proportion of renewable energy sources and power electronic devices accessed in the distribution network, the harmonic pollution problem has become increasingly serious. The traditional centralized harmonic mitigation strategy has difficulty in effectively dealing with these scattered and random harmonics. Therefore, a distributed harmonic mitigation strategy based on the dynamic points incentive of blockchain communities is proposed in this paper. Firstly, a comprehensive voltage sensitivity partitioning method with harmonic weight differentiation is proposed to realize the reasonable partitioning of each control node and controlled node in the distribution network concerning variability in harmonic components and their distribution. Then, a harmonic mitigation strategy based on the dynamic integral excitation of self-learning algorithms is constructed to promote self-organized optimization and active distributed coordinated control of mitigation devices. The strategy ensures that the total harmonic voltage distortion rate of each node meets the requirements by adjusting the partitioned collaboration to realize optimal harmonic mitigation. By setting optimized partitions in different scenarios and conducting simulation verification, the results demonstrate the effectiveness of the strategy in this paper. It stimulates synergy between devices through a dynamic incentive mechanism and significantly reduces the total harmonic voltage distortion rate across various test scenarios, reflecting the adaptability of the harmonic mitigation method presented. [ABSTRACT FROM AUTHOR]

This paper investigates whether renewable energy influences economic growth and happiness. Using panel data from 25 European Union countries for the period 2012–2022, this study employs a panel model for estimation with fixed and random effects, and robust HAC standard errors. According to the research results, in general, the growing share of renewable energy in the energy mix has a positive impact on economic growth and the happiness of citizens. However, detailed research has shown that this effect depends on the type of energy; a significant positive impact was recorded only in solar share energy, wind share energy and economic growth. However, almost all types of renewable energy were included, i.e., biofuel, hydro, solar and other renewable share energy, and all had a significantly positive impact on the level of happiness. The exception was wind share energy, which showed a significant negative impact. The research findings of this paper provide empirical support for promoting renewable energy, which is positive both for economies and the happiness of citizens. It is one of the main aspects of sustainable economic growth. [ABSTRACT FROM AUTHOR]

The integration of renewable generation presents a promising venue for displacing fossil fuels, yet integration remains a challenge. This paper investigates Demand Response (DR) as a means of economically integrating Renewable Energy Resources (RERs). We propose Incentive-Based DR (IBDR) programs, particularly suitable for small customers. The uncertainties in the electricity market price pose a challenge to IBDR programs, which is addressed in this paper through a novel and robust IBDR approach that considers both the electricity market price uncertainties and customer responses to incentives. In this paper, scenarios are simulated premised on the Western Electricity Coordinating Council (WECC) 240-bus system in which coal-fired power plants become inactivated, while the RER contribution increases in the span of one year. The simulation results indicate that the proposed IBDR program mitigates the issues associated with renewable expansion, such as utility benefit loss and market price volatility. In addition, the proposed IBDR effectively manages up to 30% of errors in day-ahead wind forecasts that significantly reduce financial risks linked to IBDR programs. [ABSTRACT FROM AUTHOR]

One of the United Nations' 17 Sustainable Development Goals is to "Ensure access to affordable, sustainable, and clean energy for all." Additionally, the growing concerns about climate change and energy security have heightened the importance of exploring alternative energy sources to replace fossil fuels. The utilisation of agricultural waste for bioenergy production has acquired significant attention due to its potential to mitigate environmental impacts and provide renewable energy sources. However, the major obstacle to producing bioenergy is managing the supply chain while considering economic, environmental, and social factors in an optimal way. This paper presents a comprehensive overview of the literature on the management of agriculture waste supply chains, specifically related to the use of modelling and optimisation techniques for planning. The first section describes different stages of the supply chain and various technologies for converting biomass to bioenergy. This is followed by a synopsis of the literature reviewed based on decision levels, objective functions, modelling methodologies, and optimisation approaches. Finally, the review highlights limitations and gaps in current research and the areas with potential for further exploration. [ABSTRACT FROM AUTHOR]

As the demand for sustainable energy solutions grows, there is a critical requirement for continuous innovation to optimize the performance and safety of renewable energy systems (RESs). Closed-loop digital twins (CLDTs)—synchronized virtual replicas embedded with real-time data and control loops to mirror the behavior of physical systems—have emerged as a promising tool for achieving this goal. This paper presents a systematic literature review on the application of digital twin (DT) technology in the context of RESs with an emphasis on the impact of DTs on the efficiency, performance, and safety assurance of RESs. It explores the concept of CLDTs, highlighting their key functionalities and potential benefits for various renewable energy technologies. However, their effective implementation requires a structured approach to integrate observation, orientation, decision, and action (OODA) processes. This study presents a novel OODA framework specifically designed for CLDTs to systematically identify and manage their key components. These components include real-time monitoring, decision-making, and actuation. The comparison is carried out against the capabilities of DT utilizing the OODA framework. By analyzing the current literature, this review explores how DT empowers RESs with enhanced efficiency, reduced risks, and improved safety assurance. [ABSTRACT FROM AUTHOR]

Today's energy challenges are multifaceted. Over the past 30–40 years, energy issues have been discussed and published on an extensive scale. The green transition involves concrete actions related to increasing energy efficiency, replacing fossil fuels with alternative fuels, producing energy using renewable resources, creating various means of transport that use electric motors, identifying technical solutions that generate an increased energy yield in the case of buildings, and waste reduction, reuse and recycling. In order to attain a climate-neutral environment, it is mandatory to impose regulations, measures and actions to help decarbonize the energy sector. The analysis of published articles on these issues is the subject of this large and information-dense review. Concretely, the transition to climate neutrality will generate obvious advantages at an economic, social and technological level, for example, the opportunity for economic growth, new business models and new markets, and the generation of new jobs or technological development. At the same time, this paper underscores the need for a multifaceted approach, integrating technological innovation, policy intervention and global cooperation for an effective energy transformation. The review suggests future issues and research directions, focusing on viable strategies for energy transition and its socio-economic environmental impacts. [ABSTRACT FROM AUTHOR]