Search

Low-carbon travel is an important part of low-carbon cities and low-carbon transportation, and low-carbon transportation is an inevitable choice to slow down the growth of carbon emissions in China. All countries in the world are actively promoting new energy vehicles and attach great importance to the application of the new energy industry in urban transportation. Commuting is an important part of urban life, and the choice of travel behavior has an important impact on traffic and environmental protection. Taking the Xi'an metropolitan area as an example, this paper expounds on the integrated development path of the industrial chain of new energy + travel in the metropolitan area and clarifies the energy transformation model of the integrated development of low-carbon transportation and energy. From the perspective of green and low-carbon, 1000 commuters were interviewed using a questionnaire survey, and the cumulative prospect model was used to verify the internal mechanism affecting commuters in metropolitan areas to choose new energy commuting. The results of the study show that new energy transportation modes play an important role in the low-carbon economy, and under different scenarios and assumptions, there are significant differences in the cumulative prospect values of the subway, new energy buses and fuel private cars, and corresponding optimization measures are proposed to increase the proportion of new energy commuting trips. The results will help further promote the development of a low-carbon economy and energy integration in the field of transportation and provide a reference for the sustainable development of public transportation. [ABSTRACT FROM AUTHOR]

The exploitation and utilization of shallow geothermal energy are of great significance to realizing China's "double carbon" goal and promoting a green economy and social development. However, many projects using ground source heat pumps to exploit shallow geothermal energy have disrupted the thermal balance of the geothermal field due to insufficient preliminary research, affecting the sustainable utilization of shallow geothermal energy. Therefore, a 3D groundwater–thermal coupling model was established in this paper using the geotemperature data of a ground source heat pump system in Xi'an. This study investigated the response characteristics of the groundwater–thermal system to the ground source heat pump system using the numerical simulation method and discussed the optimal layout scheme of the system on this basis. After years of simulation, it was found that long-term operation of the ground source heat pump system under actual operation produces "cold accumulation". In addition to artificial intervention of the groundwater flow field, the effects of the system operating parameters and layout settings are also investigated to alleviate this cold accumulation. The results show that changing the operating parameters so that the heat transfer is the same in winter and summer, cross-locating the cooling holes with the heating holes, and placing multiple pumping and recharge wells downstream can alleviate the cold accumulation in the heat exchange zone. The results of this numerical simulation study provide an important reference for solutions to mitigate the accumulation of ground cold and heat in developing shallow geothermal energy using borehole heat exchangers and to suppress the downstream geotemperature disturbance via the ground source heat pump system. [ABSTRACT FROM AUTHOR]

In the age of the digital economy, the data center is the most crucial piece of infrastructure. The issue of the excessive power consumption of a data center's cooling system needs to be addressed as the national objective of "peak carbon and carbon neutrality" is increasingly promoted. In this study, a microchannel-separated heat pipe-cooling system with evaporative condensation is introduced. The system may switch between three modes of operation in response to changes in outdoor air quality parameters, thereby maximizing the utilization of natural cooling sources while lowering data centers' cooling costs. The purpose of this paper is to analyze the energy-saving potential of the hybrid system through experimental tests. The results show that 114.4% is the ideal liquid-loading rate for the heat pipe system. Under working conditions in Xi'an, the annual operating hours of the three modes accounted for 47.2%, 6.1%, and 46.7%. The hybrid cooling system may save 62.04% of the energy used annually compared to the standard cooling system and the cooling system in the server room thanks to its yearly average COP of 9.43. [ABSTRACT FROM AUTHOR]

The variability and inhomogeneity of solar energy limits the development of solar heating systems (SHS) in many fields. In order to improve the utilization efficiency of SHS, this paper takes three typical cities (Xi'an, Dunhuang, Lhasa) as the research object, studies the operation state of SHS in student dormitory buildings, and puts forward a corresponding optimization strategy. The research shows that the reduction of water supply temperature will improve the operation efficiency and energy saving effect of a spontaneous combustion heat pump and that there is an optimal volume of heat storage water tank (HSWT), which can make the energy saving effect of SHS run better. The optimization of the SHS shows the water supply temperature is 35 °C, and the optimal volume of HSWT is 15 m3 in the "Resource-general area (Ⅲ)" represented by Xi'an, 25 m3 in the "Resource-rich area (Ⅱ)" represented by Dunhuang, and 40 m3 in the "Resource-richer area (Ⅰ)" represented by Lhasa. With the increase in the abundance of solar energy resources in the region, the optimal volume of HSWT also increases. Meanwhile, the solar energy contribution rate of the three regions in descending order is 61.3% (Lhasa), 32.8% (Dunhuang), and 25.9% (Xi'an). After optimization, the contribution of SHS increased by about 5%. The research results will help improve the efficiency of SHS in cold areas of China and make the system more efficient and energy efficient during operation. [ABSTRACT FROM AUTHOR]

Due to the increase in environmental problems and air pollution during the heating period, it is important to promote clean heating in cold regions, thereby meeting the heating demand in a green manner. In order to allocate resources more effectively and facilitate the consumption of renewable energy, this paper designs an integrated heating system that incorporates geothermal energy into the framework of an integrated energy system of electricity, heating, and gas. An analysis of the environmental and economic benefits indicates that the system reduces pollutant emissions and decreases the cost of urban heating. Using an example of central heating of residential buildings in Xi'an, the paper conducts a scenario analysis based on the gas peak-shaving ratio and the ratio of geothermal heating loads to basic heating loads. The results demonstrate that the environmental and economic benefits of the integrated heating system are higher compared to central heating using coal-fired boilers. In addition, this paper conducts a sensitivity analysis of the heat source to the price factors and the load ratios. The results show that the operating costs of the integrated heating system are most sensitive to the natural gas price and the gas peak-shaving ratio. Therefore, an optimum natural gas peak-shaving ratio can be determined. [ABSTRACT FROM AUTHOR]

Natural lighting in office buildings is often affected by excessive solar heat gain and discomfort glare, and the transitional seasons are no exception. Therefore, addressing the issue of natural lighting in buildings has always been a challenge in developing shading control strategies. This study designed a model-based calculation method for shading blind control indicators. The method combines existing physical models for sky conditions, solar radiation, heat transfer, thermal comfort, glare, and illuminance calculations and incorporates modifications and additions. Additionally, an equivalent energy-saving model for shading was established. A shading blind control strategy balancing indoor light and the thermal environment with energy savings during transitional seasons was proposed. In transitional seasons, this method can eliminate 100% of glare, reduce discomfort illuminance duration by 81.3% and heat discomfort duration by 87.5% and save 81.3% of lighting energy consumption when air conditioning is used. By comparing the simulation results of an office building in Xi'an with the results obtained from this calculation method, the absolute error percentage was found to be 6.83%, verifying the reliability of the calculation method. Finally, the proposed control strategy was compared with common methods such as no blinds, end-angle control, and fixed-angle control to evaluate its performance in terms of daylighting, thermal comfort, and energy savings. The results showed that the control strategy proposed in this study has significant advantages with respect to various performance indicators. [ABSTRACT FROM AUTHOR]

Solar energy is a sustainable source that can be effectively utilized to address winter heating challenges in buildings. To ensure the efficient application of solar energy for heating purposes and to maintain reliable performance of the heating system, the integration of phase-change materials (PCMs) in thermal energy storage (TES) systems has emerged as a crucial auxiliary approach. This study focuses on the design and simulation of four TES structures: smooth, finned, metallic foam, and metallic foam-finned tubes. It explores their thermal characteristics, such as complete melting time and heat flux, under various flow conditions. Additionally, a residential building in Xi'an is selected as the object, where the proposed solar energy phase-change TES system is employed to meet the heating demand. Economic indicators, including initial investment and investment payback period, are estimated using a static evaluation method. The results highlight that the complete melting time of the TES unit with a metallic foam-finned tube is 4800 s, which is 88.3% less than the smooth tube. Finally, based on the actual project, it is determined that the metallic foam-finned heating system, with an HTF flow rate of 0.25 m/s, requires the fewest TES devices (914) and has a payback period of 13 months. [ABSTRACT FROM AUTHOR]

Behavior-driven energy conservation has been a promising strategy for reducing building energy consumption as well as carbon emissions. With the intention of revealing the impacts of an individual's personality basis on energy conservation behavioral attitudes and intentions in households and offices, the present study proposes and conducts an experiment in Xi'an, China with two groups for the investigation of such attitudes towards household energy-saving behavior (HESB) and office energy-saving behavior (OESB), respectively. The research adopts structural equation modeling for experiment data analysis. The analysis results suggest that the two personality traits, Agreeableness and Neuroticism, are significantly related to both HESB and OESB attitudes. Especially, agreeable people tend to present stronger energy-saving attitudes, while individuals with higher Neuroticism are less likely to do so. The results indicate that the impacts of these two traits on energy-saving attitude are found to be less influenced by different environment settings. Further, the results find that Extraversion positively influences energy-saving attitude in the office environment, while Openness only significantly works in the household environment. It is hoped that the findings of the present study can provide informative references to energy-saving intervention design as well as further studies on the spillover of pro-environmental behaviors. [ABSTRACT FROM AUTHOR]

This study proposed a combined solar-assisted heat pump (SAHP) system that could operate in the serial mode or parallel mode. For this proposed system, a stable year-round operation could be achieved without the assistance of electric heating or low-temperature heat pump. By analyzing the heat balance equations, a correlation of the combined SAHP system for the two modes switched was obtained, which provided a theoretical basis for the optimal operation of this system. In addition, the performance of the proposed system applied in a university bathroom in Xi'an district was investigated using TRNSYS. The results illustrated that compared to the serial and parallel systems, the proposed system exhibited a good performance on energy efficiency. The annual average coefficient of performance (COP) of the proposed system was 5.7, obviously higher than those of the serial system and the parallel system, which were 3.3 and 4.3, respectively. Therefore, the results in this study could provide the theoretical guidance and reference for practical engineering design. [ABSTRACT FROM AUTHOR]