Search

The EU has set the ambitious target of raising the share of EU energy consumption produced from renewable resources to 32% by 2030, with a target of climate neutrality by 2050. The aim of this paper is to assess the role of biomass usage in the context of these targets. The paper identifies the progress made between 2013 and 2022 by focusing on a selection of EU countries. The largest bioenergy increments of 130, 77, and 60 PJ were reported for Poland, Sweden, and the Netherlands. This study evaluates the crucial role of co-generation and heat in EU regions, with biomass usage between 55 and 80% of the combined heat and power (CHP) energy in Nordic countries. The future perspectives for bioenergy based on EU policies, biomass resources, and technical issues were addressed. The EU possesses around 9% of the global biomass supply, ensuring a certain level of biomass resource dependence. Thus, the biomass usage demand in energy production, non-energy sectors, and transport is expected to rise, leading to increments of 13–76% on biomass imports. It appears that bioenergy development is mostly limited by economic issues and uneven support for bioenergy in different EU countries as well as environmental issues. The study shows a promising and sustainable potential of bioenergy in the EU as a renewable energy source while minimizing negative impacts on the environment and the economy. By 2050, liquid biofuels are likely to be increasingly used in the transport sector. Non-energy sector usage of biomass is still in an early stage of development, except for the pulp and paper industry, and significant use of biomass in non-energy sectors seems unlikely in the near future. [ABSTRACT FROM AUTHOR]

The objective of this study is to analyze the economic viability of municipal household solid waste (organic matter + paper) for the production of gas, coke and biofuel through the pyrolysis and distillation process. The waste was collected in the city of Belém do Pará-Brazil and pretreated at the Federal University of Pará. The analyzed fraction (organic matter + paper) was subjected to the pretreatment of drying, crushing, and sieving and was subsequently subjected to proximate characterization and, finally, pyrolysis of the organic fraction (organic matter + paper) in a fixed bed reactor. Initially, it was necessary to review the literature, and with the yields obtained by pyrolysis of the fraction, economic feasibility analyses were carried out. The economic indicators for evaluating the most viable pyrolysis process were basic payback, discounted payback, net present value, internal rate of return, and profitability index, which are all financial metrics commonly used in investment analysis and decision making. These metrics provide valuable insights into the financial viability and attractiveness of investment projects. They are essential tools for assessing the feasibility and profitability of various ventures, helping decision-makers make informed choices in allocating resources. The analysis of the indicators showed the economic viability considering an analysis horizon of 10 years of materials based on organic material and paper. The breakeven point obtained was USD 0.96/dm3 and the minimum biofuel sales price found in this project was USD 1.30/dm3. The sensitivity research found that material costs (organic matter + paper), bio-oil yield, total project investment and electricity, respectively, are the variables that most affect the minimum biofuel sales price. [ABSTRACT FROM AUTHOR]

Producers of biofuels for the EU market may use 'low ILUC-risk' certification as evidence that they have not deprived other economic sectors of feedstock material, and hence that indirect land use change (ILUC) emissions have been avoided. At present, the uptake of low ILUC-risk certification is limited to a handful of niche projects, as there is little commercial incentive for obtaining certification. This may be considered a missed opportunity, because low ILUC-risk farming methods offer a range of sustainability co-benefits beyond the mitigation of ILUC emissions. This paper examines the policy foundations of low ILUC-risk and develops policy recommendations that would aim to confer advantages to low ILUC-risk biofuels. Some weaknesses in the low ILUC-risk system's environmental safeguards are also highlighted. [ABSTRACT FROM AUTHOR]

Selected and tested poplar clones are very suitable biomass resources for various applications such as biofuels, the pulp and paper industry as well as chemicals production. In this study, we determined the content of lignin, cellulose, holocellulose, and extractives, syringyl to guaiacyl (S/G) ratio in lignin, and also calculated higher heating values (HHV) among eight examined clones of Populus grown on three different experimental sites. The highest lignin content for all the examined sites was determined in 'I-214' and 'Baka 5' clones, whereas the highest content of extractives was found in 'Villafranca' and 'Baka 5' clones. The highest S/G ratio for all the examined sites was determined in 'Villafranca' and 'Agathe F' clones. The chemical profiles of main wood components, extractives, and the S/G ratio in lignin were also influenced by both the experimental site and the clone × site interaction. Higher heating values, derived from calculations based on the contents of lignin and extractives (or lignin only), were in close agreement with the previously published data. The highest heating values were found for 'Baka 5' and 'I-214' clones. The optimal method of poplar biomass utilization can be chosen on basis of the lignocellulosics chemical composition and the S/G ratio in lignin. [ABSTRACT FROM AUTHOR]

Ecofuels and their feedstock come in three main product classes: electrofuels (e-Fuels), biofuels, and non-biowaste-derived fuels. Ecofuels originate from non-fossil sources, derived from circular raw materials such as non-food organic waste, renewable hydrogen, and captured CO2 through a rapid process of carbon fixation. Proposed regulation drafts under discussion indicate that new fuels would need to reach a substantial degree of climate neutrality. The manufacture of all ecofuels, however, requires energy input to accomplish the conversion of the initial feedstock; their climate neutrality claims stem from the use of renewable electric energy and/or biomasses in the production process, but fossil fuels are still the main primary sources of global (and the EU's) electric power, and most biofuels consumed in the EU transport mix are still crop-based, with potential conflicts with food and land use. Furthermore, entirely neglecting GHG emissions from renewable energy generation is scientifically debatable, as the impact of the energy (and the related GHG emissions) embedded in the materials used to build renewable energy facilities is small, but not nil. The paper reports ecofuel trends according to the above-mentioned originating technologies and discusses the issues related to their development. [ABSTRACT FROM AUTHOR]

Energy (including thermal) needs are growing rapidly worldwide thus leading to increased energy production. Considering stricter requirements for the employment of non-renewable energy sources, the use of biofuel in energy facilities appears as one of the best options, having high potential for growth that will increase in the long run both in the Baltic region and the European Union as a whole. This publication investigates the possibilities of using various blends of biofuel containing lignin for heat production and emissions to the air during combustion processes. The paper examines the chemical composition of lignin and bottom ash and explores the impact of a different ratio of lignin in the fuel mixture, the effect of the power of biofuel combustion plants (boilers) and the influence of fuel supply to the combustion chamber on gaseous pollutants (CO, NOx, SO2) and particulate matter emissions. The results of the conducted study demonstrate that, in contrast to pure lignin, the concentrations of alkali metals, boron and, to a lesser extent, nickel and chlorine have increased the most in bottom ash. The use of lignin can effectively reduce the need for conventional biofuel by 30–100% and to increase the temperature of exhaust gases. The lowest emissions have been observed using a mixture of 30% of lignin and biofuel at the lowest range of power (2.5–4 MW). Under the optimal oxygen/temperature mode, carbon monoxide concentrations are approximately 20 mg/Nm3 and those of nitrogen oxides–500 mg/Nm3. Particulate matter emissions reach 150 mg/Nm3, and hence applying air treatment equipment is required. [ABSTRACT FROM AUTHOR]

Forests are a potentially carbon-negative energy source and function as carbon sinks. However, both of these functions have become threatened significantly by spruce bark beetle infestation in Czechia. This paper assesses how this ecological issue may affect the future energy mix, and in the process, affect carbon emission reduction targets and the available share of renewable energy sources (RESs). We assess several forest development scenarios with three policy incentives: subsidising wood pellet production, striving for climate neutrality, and adhering to ecological constraints. We build a spatially enriched energy system model, TIMES-CZ, based on Eurostat's NUTS3 regions. We find that the spruce bark beetle infestation may not exert a lasting influence on overall decarbonisation pathways, the energy mix, or system-wide costs in any forest scenario. The RESs share is affected only until 2030, and the effect is minimal, at <1.5 percentage points. Nevertheless, Czechia's RES contribution is far below the 45% 2030 EU target. Subsidising wood pellet production is a costly transition that does not contribute to meeting the target. Limiting forest biomass availability and adhering to ecological constraints increase the overall system costs and worsen the chances of meeting decarbonisation targets. [ABSTRACT FROM AUTHOR]

The supply logistics of energy biomasses generally involves a complex system of supply chains, which aim to achieve timely and cost-efficient feedstock deliveries to biomass demand points. The performance of supply chains is often examined in case studies where spatial data about biomass sources and transportation networks are deployed in varying resolutions and to different geographical extents. In this paper, we have reviewed 94 publications, in which spatial data were used in case studies that focused on analysing and optimising energy biomass supply chains. The reviewed publications were classified into 16 categories, according to the publication year, study methods and objectives, biomass types, supply system complexity and the spatial features of each study area. This review found that the use of geographical information systems in this context has increased in popularity in recent years, and that and the multiformity of the applied methods, study objectives and data sources have increased simultaneously. Another finding was that most of the studies that we reviewed focused on countries in which spatial biomass and transport network data of high quality were unrestrictedly available. Nevertheless, case studies, including spatial data from multiple countries, were represented marginally in the papers that we reviewed. In this paper we also argue that a standard way of reporting geographical contents in biomass case studies should be developed to improve the comprehension and reproducibility of the publications in this field of research. [ABSTRACT FROM AUTHOR]

Environmental pollution caused by marine engines fueled with fossil fuels is a matter of growing significance. The search for renewable and clean energy sources and improvements in the way fossil fuels are burnt aims to reduce the environmental impact of these engines. For this purpose, fatty acid methyl esters were produced from pure canola oil using KOH-assisted methanol-based transesterification with a maximum yield of 90.68 ± 1.6%. The marine engine's model was created with CONVERGE software, followed by experimental verification. This paper examines the blended fuel characteristics of a diesel engine with biodiesel blends (0%, 5%, 10%, and 15%) at different loads of engines (50%, 75%, and 100%). It also explores the variation in these characteristics of B10 (10% biodiesel–diesel blends) at three different load conditions and four different EGR rates (0%, 5%, 10%, and 15%). The results indicate that the addition of biodiesel to diesel fuel reduces CO, HC, and soot emissions, while increasing NOx emissions. Additionally, the EGR rate decreases NOx emissions but results in higher levels of soot, CO, and HC emissions. Finally, response surface methodology was used to elicit the engine's characteristics. It was determined that the optimum experimental operating conditions were 100% engine load, 6.9% biodiesel addition, and 7.7% EGR. The corresponding BTE, BSFC, NOx, and HC emissions were 38.15%, 282.62 g/(kW-h), 274.38 ppm, and 410.37 ppm, respectively. [ABSTRACT FROM AUTHOR]

The 2030 sustainable development goal (SDG7) target progress indicators show that developing countries are off track. Ethiopia's low performance to the SDG7 has endangered its economic, societal, and environmental sustainability. The performance in clean cooking has contested its policy, institutional setup, and R&D. The objective of this paper lies in evaluating four improved cook stoves against a traditional stove based on fuel consumption, cooking time, and emission. The study would contribute to solving the clean-cooking challenges by giving scientific evidence on the technological status of these stoves. The evaluation results show that the TCS consumed 2.7 kg of fuel, had a cooking time of 1:30 h, and used 4.3 kg CO2 per cooking period. Similarly, the ICSs required: 1.2 kg, 2 h, and 1.9 kg (EZY); 1.5 kg, 3 h, and 2.4 kg (Tikikkle); and 1.4 kg, 5 h, and 3.2 kg (Lakech), respectively. In addition, these stoves registered a thermal efficiency of 25, 17, and 19%, respectively. The metal body, insulation, and air inlet caused EZY to perform better. However, these technologies are low-order technologies, and their performance is found to be a major locking factor in ICS adoption. This evidence would help ICS actors to understand where to intervene for better adoption. Furthermore, the authors gave implementation fix recommendations to improve ICS programs. [ABSTRACT FROM AUTHOR]

Formulating energy policies at national, European, and global levels is extremely challenging. The move away from fossil fuels is associated with a variety of technological, economic, and social implications, each of which is subject to dynamic changes and societal scrutiny and can hardly be predicted with certainty. Therefore, a fact-based assessment for the path to a sustainable green energy future is sought out in this paper, using the road-based mobility sector of the Federal Republic of Germany as an example. The analysis performed in this paper is built on publicly accessible, reputable sources like DESTATIS and EUROSTAT. In addition, some very simple calculations were made, e.g., on the potential for wind and photovoltaic energy within Germany. Such an analysis needs to start with the overall energy consumption of any one country. A basic assumption of the paper is that the energy system of the future will be based to a large extent on electricity and its storage in chemical energy. It is assumed that, in addition to hydrogen, liquid energy sources will play a significant role due to the simplicity of their logistics and the subsequent implications on cost. Examples of green, electricity-based fuels with great potential are methanol, methane, and ammonia. Additionally, biomass plays an important role, either for direct use as a fuel or as a source of non-fossil carbon. Today, biofuels, i.e., biodiesel and bioethanol, deliver the largest contribution to climate protection in the EU transport sector. The main goal—the reduction of greenhouse gas emissions—often collides with geopolitical circumstances or national political necessities. This includes, for example, the current world market situation and its national impacts caused by the Russian attack on Ukraine. The prospect for a green, sustainable, and defossilized energy supply are discussed in this context. The paper concludes that a defossilized world energy supply and trade based on renewable electricity and its derivatives, eHydrogen and refuels, and on biomass, is feasible. [ABSTRACT FROM AUTHOR]

This paper presents methodologies and equipment for SI-traceable inline measurements of water content (a critical quality parameter) in solid biofuels. Inline measurement systems for water content are commonly used at CHP plants, providing continuous real-time data. However, the accuracy of these systems is in most cases unsatisfactory, mainly because the systems are not calibrated representatively for the relevant material, and until now, calibrations traceable to the SI system have not been available. To provide reliable and accurate inline water content data, new procedures and equipment for calibrating measurement systems were developed. Two reference methods for the determination of water content were developed; one measures the airflow and dewpoint of desorbed water in the air passing a test sample, while the other uses a P2O₅-sensor. Additionally, a transfer standard based on a cavity resonance sensor was developed for fast onsite calibration of the inline sensor at the power plant. This new instrument allows for quick and accurate measurements. The transfer standard is made metrologically traceable to the primary measurement standards. The entire system was demonstrated by calibrating an inline microwave-based (MW) sensor at the CHP plant of VERDO in Randers, Denmark. Thus, a complete metrological traceability chain was established from an industrial to a primary standard. [ABSTRACT FROM AUTHOR]

The development of civilization is related to an increase in energy demand, while its production is still based mainly on fossil fuels. The release of carbon into the environment, which disturbs the balance of the global system, is the consequence of using these fuels. One possible way to reduce the carbon footprint of the energy sector is the widespread use of cover crops' biomass for energy production. The aim of this paper is to critically review the knowledge on the dissemination of catch and cover crops' cultivation in different regions of the world, and the yield, chemical composition and biomethane potential of their biomass. Additionally, the environmental benefits, as well as the challenges and opportunities associated with this biomass use in the energy sector, are considered. The review showed that the aboveground biomass of cover and catch crops is a valuable source for the production of bioenergy in biogas plants. However, the key role of these crops is to prevent soil degradation. Therefore, changes in biomass target use must be preceded by a multi-aspect analysis that allows their impact on the environment to be assessed. [ABSTRACT FROM AUTHOR]

The combustion of fossil fuels constitutes a significant catalyst for climate change, resulting in the annual release of about two billion tonnes of carbon dioxide (CO2). The increase in CO2 emission is directly linked to a heightened occurrence of natural calamities and health-related issues. The substitution of fossil fuels with renewable energy sources is a fundamental approach to reduce the negative impacts caused by consumption of these nonrenewable energy resources. The utilisation of biological methodologies to produce environmentally friendly energy from renewable sources holds significant potential for the sustainable production of fuel. However, the cultivation of first- and second-generation biofuel crops presents a challenge, since they compete for limited cropland, hence constraining their overall viability. In contrast, photosynthetic microorganisms such as algae and cyanobacteria exhibit significant potential as third-generation biofuel catalysts, devoid of the limitations associated with contemporary biofuels. Cyanobacteria, a type of photosynthetic prokaryotes, exhibit significant potential for the direct conversion of carbon dioxide (CO2) into biofuels, chemicals, and various other valuable compounds. There has been a growing interest in the concept of utilising biological processes to convert carbon dioxide into fuels and chemicals. The introduction of a limited number of heterologous genes has the potential to confer upon cyanobacteria the capability to convert particular central metabolites into a diverse range of end products. The progress in the field of synthetic biology and genetic manipulation has enabled the manipulation of cyanobacteria to synthesise compounds that are not generally produced by these organisms in their natural environment. This study focuses on recent papers that employ various methodologies to engineer cyanobacteria for the purpose of producing high-value compounds, such as biofuels. [ABSTRACT FROM AUTHOR]

As the climate crisis worsens, power grids are gradually transforming into a more sustainable state through renewable energy sources (RESs), energy storage systems (ESSs), and smart loads. Virtual power plants (VPP) are an emerging concept that can flexibly integrate distributed energy resources (DERs), managing manage the power output of each DER unit, as well as the power consumption of loads, to balance electricity supply and demand in real time. VPPs can participate in energy markets, enable self-scheduling of RESs, facilitate energy trading and sharing, and provide demand-side frequency control ancillary services (D-FCAS) to enhance the stability of the system frequency. As a result, studies considering VPPs have become the focus of recent energy research, with the purpose of reducing the uncertainty resulting from RESs distributed in the power grid and improving technology related to energy management system (EMS). However, comprehensive reviews of VPPs considering their formation, control techniques, and D-FCAS are still lacking in the literature. Therefore, this paper aims to provide a thorough overview of state-of-the-art VPP technologies for building sustainable power grids in the future. The review mainly considers the development of VPPs, the information transmission and control methods among DERs and loads in VPPs, as well as the relevant technologies for providing D-FCAS from VPPs. This review paper describes the significant economic, social, and environmental benefits of VPPs, as well as the technological advancements, challenges, and possible future research directions in VPP research. [ABSTRACT FROM AUTHOR]

In this study, biorefinery as a concept is applied to thermomechanical pulp (TMP)-based paper production to evaluate the possibility of co-production of synthetic natural gas (SNG), electricity and district heating in addition to mechanical pulp and paper. The combined heat and power plant (CHP) associated to TMP is replaced by a biomass-to-SNG (BtSNG) plant. Implementing BtSNG in a mechanical pulp production line might improve the profitability of a TMP mill and also help to commercialize the BtSNG technology by taking into account of some key issues such as biomass availability, heat utilization, etc. A TMP + BtSNG mathematical model is developed with ASPEN Plus. The model prediction shows that the scale of the TMP + BtSNG mill and SNG price are two strong factors for the implementation of BtSNG in a TMP mill. A BtSNG plant associated to a TMP mill should be built at a scale above 100 MW of biomass thermal input. For the case of Swedish economic condition, commercialization of SNG production as a transport biofuel has not matured yet. Political instruments to support commercialization of transport biofuel are necessary. [ABSTRACT FROM AUTHOR]

The world is moving towards a low-carbon economy through renewable energy sources. In this context, concentrating solar power (CSP) technologies can exploit the rich solar resource in Brazil, diversifying the national electricity mix. The aim of this paper is to support the insertion of CSP generation in the Brazilian bottom-up model MATRIZ by analyzing the environmental performance of three CSP technologies: (i) solar tower power (STP) with a thermal storage system (TSS) of 7.5 h; (ii) solar thermal parabolic trough (STPT) with a TSS of 6 h; and (iii) STPT without TSS. From a life cycle perspective, their freshwater consumption and greenhouse gas (GHG) emissions are addressed by employing the software SimaPro, the Ecoinvent database, and the ReCiPe 2016 method, as well as information from the system advisory model (SAM) and the literature. As a result, STP is the most environmentally sound CSP alternative, presenting lower GHG emissions and water consumption than the two STPT technologies. In general, CSP generation proves to be more environmentally attractive than some fossil-fired power plants and renewable energy sources. Moreover, moving the manufacturing of CSP technologies to Brazil has the potential to reduce GHG emissions from the upstream processes of their value chain. [ABSTRACT FROM AUTHOR]

Poland is an important producer of rapeseed used in the biofuel industry. The rate of production of the biofuel industry increased after Poland's accession to the European Union (EU). The reasons for these changes are numerous, of which the European Union's energy policy is the most important. This paper aims to analyze the performance of the biofuel industry in Poland in view of changes in the market. Moreover, I evaluated changes in the biofuel industry after Poland's accession to the EU. In addition, I analyzed the fixed and current assets of the Polish biofuel. The hypothesis that the price of rapeseed oil is the key determinant of profitability in the biodiesel industry was formulated. A statistical analysis proved the second hypothesis stating that the net profit of biodiesel companies depends on biodiesel production to the greatest extent. The time range of the analysis was 2005–2021. To analyze the economic performance of the biofuel industry in Poland, these changes were used. A regression analysis to find factors influencing the economic performance of the biofuel industry was used. More and more oils are used for the production of first-generation biofuels. Refined rapeseed oil also increased from 386.5 thousand tons to 780.6 thousand tons. Such numbers demonstrate the development of biofuel markets. [ABSTRACT FROM AUTHOR]

The energy use of residues from agriculture, forestry, and solid waste can foster the transition towards a more renewable energy supply. This paper analyzes the energy potential of the above-mentioned sources for energy applications in Kosovo. The analysis is based on statistical data from different studies and reports, analyzing and calculating them to determine the theoretical and energy biomass potential. Kosovo can increase its self-sufficiency by taking advantage of its rich but under-utilized potential of biomass energy sources. This is a novelty study in this area, considering Kosovo lignite-dominated heat energy and electricity consumption and the available special literature. According to our estimates, the theoretical potential is 6.13 million tons/year, while the biomass energy potential should be around 4.57 million tons/year, including approximately 74.6% of biomass, which can be used for energy needs (heating and electricity). Based on the data and calculations, the available and usable potential shows biomass as an energy source with high potential in Kosovo; its share is very low, but it is reasonable to grow for both environmental and economic reasons. [ABSTRACT FROM AUTHOR]

The use of biomass can be a strategic way to realize a carbon-neutral energy plan, ensuring a fuel feedstock. Residual biomass arising from pruning is demonstrated to be an important energy resource in terms of quantity and quality. In the Salento peninsula, Apulia Region, in the south of Italy, a dramatic outbreak of Xylella fastidiosa has decimated olive trees since 2013, gaining a considerable amount of wood biomass. This paper, starting from the need to find a way to optimize the use of this available stock, reviews the main technologies on the utilization of olive wood for energy purposes. In particular, processes and products are here described, and an energy analysis compares lower heating value (LHV), higher heating value (HHV), mass yield, process operating conditions, and energy generated and spent by the process in order to find the most effective technology in order to optimize the energy use of olive biomass. The conclusions show the advantages and disadvantages of each technology. Pyrolysis performs well, showing the best results for both char HHV and syngas yield under different operating conditions. Gasification seems to be the most appropriate among conversion technologies to optimize olive tree pruning for energy purposes, as it can be used to produce both electrical and thermal energy. In terms of economic valorization, char is the most promising material representing a value-added product, the quality and versatility of which ranges from fuel to soil improvers and additives for the construction of supercapacitors. Conversely, its disadvantages are mainly represented by high ash content, which can slightly decrease the boiler efficiency. Finally, the amount of alkali metals can produce several problems, such as fouling, slagging, corrosion, etc., posing a challenge for combustion control and pollutant minimization. [ABSTRACT FROM AUTHOR]

Environmental problems associated with global energy supply systems and the increasing amount of global solid waste production are triggering a shift towards a greater reliance on biomass waste. Waste-to-energy systems have become important for industries and scientists because of the increasing interest in energy production from waste, due to improved efficiency and cost-effective solutions. The shift to biomass is also essential for industries to use their own waste to produce their own energy, which is in line with circular economy concepts. This Special Issue "Biomass Wastes for Energy Production" of Energies comprises ten (10) papers, including one review article, that represent the latest advances of waste-to-energy technologies and contribute to the rethinking of global energy supply systems. The Guest Editor also highlights other relevant topics that fall beyond the coverage of the published articles. [ABSTRACT FROM AUTHOR]

Huge amounts of carbon being sequestered in forest ecosystems make them an important land carbon sink at the global scale. Their ability to withdraw carbon dioxide (CO 2 ) from the atmosphere, whose concentration is gradually increasing due to anthropogenic emissions, renders them important natural climate-mitigation solutions. The urgent need for transition from high to zero net emission on country, continental, and global scales, to slow down the warming to an acceptable level, calls for the analysis of different economic sectors' roles in reaching that ambitious goal. Here, we examine changes in CO 2 emission and sequestration rates during recent decades focusing on the coal-dominated energy sector and Land Use, Land-Use Change, and Forestry (LULUCF) as well as wood production at the country level. The main purpose of the presented study is to examine the potential of storing carbon in standing forest biomass and wood products in Poland as well as the impact of disturbances. The ratio of LULUCF absorption of CO 2 to its emission in Poland has ranged from about 1% in 1992 to over 15% in 2005. From a climate-change mitigation point of view, the main challenge is how to maximize the rate and the duration of CO 2 withdrawal from the atmosphere by its storage in forest biomass and wood products. Enhancing carbon sequestration and storage in forest biomass, via sustainable and smart forestry, is considered to be a nature-based climate solution. However, not only forests but also wood-processing industries should be included as important contributors to climate-change mitigation, since harvested wood products substitute materials like concrete, metal, and plastic, which have a higher carbon footprint. The energy perspective of the paper embraces two aspects. First, CO 2 sequestration in forests and subsequently in harvested wood products, is an effective strategy to offset a part of national CO 2 emissions, resulting largely from fossil fuel burning for energy-production purposes. Second, wood as biomass is a renewable energy source itself, which played an important role in sustaining energy security for many individual citizens of Poland during the unusual conditions of winter 2022/2023, with a scarce coal supply. [ABSTRACT FROM AUTHOR]

Since the impending warning of fossil fuel inadequacy, researchers' focus has shifted to alternative fuel generation. This resulted in the use of a wide variety of renewable biomass sources for making biofuels. Biofuels made from biomass are seen as the most promising long-term strategy for addressing issues associated with conventional energy sources, atypical climate change, and greenhouse gas emissions. Hydrocarbons may be efficiently extracted from biomass, which contains a lot of sugars. Biofuels including bioethanol, biodiesel, biohydrogen, and biogas can be produced from biomass for widespread usage in transportation, industry, and households. In recent years, there have been numerous reports of breakthroughs in the manufacturing of biofuels and biogas. This paper examines the big picture of biogas generation, with an emphasis on the many forms of biomass utilization in both commercial and residential settings in rural areas. [ABSTRACT FROM AUTHOR]

With the strong advancement of the global carbon reduction strategy and the rapid development of renewable energy, compressed air energy storage (CAES) technology has received more and more attention for its key role in large-scale renewable energy access. This paper summarizes the coupling systems of CAES and wind, solar, and biomass energies from the perspective of system topology, and points out the advantages and limitations of each system. It is shown that the coupling of wind energy and CAES is mainly combined in series and in parallel, and sometimes part of the wind power can be converted into thermal energy when coupled to CAES. The coupling between solar heat and CAES is an important form of coupling between solar energy and CAES. Solar-heat-coupled CAES mainly uses solar energy to heat expander inlet air. The coupling forms of solar energy and CAES are based on various CAES forms, various heat heating sequences, reheating, bottom cycle, and other factors. The combination of biomass and CAES is generally based on biomass gasification power generation technology. In the future, a wind–solar–CAES multiple coupling system is expected to become a promising large-scale form for the utilization of renewable energy, and this integrated system has great potential as a system configuration, but has some technical challenges. [ABSTRACT FROM AUTHOR]

In order to achieve the goal of carbon peaking and carbon neutralization, we must vigorously develop renewable energy. As one of the important renewable energy sources, the development and utilization of biomass energy has a high cost, and it is difficult to compete with traditional fossil energy in the early stage of development. Therefore, it is necessary for the government to escort the development of the biomass energy industry through legal means. First of all, on the basis of fully analyzing the development prospects of China's biomass energy, the article sorts out the laws and regulations related to biomass energy in China, and finds the shortcomings. Secondly, this paper draws on the institutional experience of the United States, Brazil, Sweden and other countries with relatively developed biomass energy industry, and provides suggestions for improvement from three aspects: law, policy and administrative system, with a view to supporting China's development of biomass energy industry and realizing the "dual carbon target" theoretically. [ABSTRACT FROM AUTHOR]

This paper describes examples of energy crops that are profitable to burn, and whose cultivation is not complicated or expensive. Rapid growth of biomass, especially the green mass of energy crops, is indicated, which means that, in relation to fossil fuels, energy crops are considered renewable raw materials. An assessment of Polish non-food energy agriculture was conducted in the context of the prospects of a renewable energy source, namely, biomass. Recommendations for crop cultivation, the size of possible yields and the most important parameters of the obtained biomass, which have the greatest impact on the suitability of energy use, are presented. Materials of biological origin for combustion are divided into three groups: wood waste, by-products and plant products for the energy industry. It is indicated that 2 tons (Mg) of dry wood or straw is energetically equivalent to 1 Mg of coal, and 1 m3 of biogas is energetically equivalent to 1 kg of Polish coal. A novelty of this article is the interpretation of obtaining primary energy, including energy from renewable sources, in the European Union and Poland, taking into account the production of wood waste, straw, cereals and energy crops. The mechanism of the impact of the production parameters of energy crops was revealed during the prepared analysis of the prospects of Polish energy agriculture. Additionally, we conducted an analysis of the potential of biomass as a source of energy in the context of: obtaining primary energy, including energy from renewable sources, in the European Union and Poland; the number of biogas plants in Poland; and the area of agricultural land that is potentially useful for the cultivation of energy crops. [ABSTRACT FROM AUTHOR]

The implementation of electricity-charged thermochemical energy storage (TCES) using high-temperature solid cycles would benefit the energy system by enabling the absorption of variable renewable energy (VRE) and its conversion into dispatchable heat and power. Using a Swedish case study, this paper presents a process for TCES-integrated district heating (DH) production, assesses its technical suitability, and discusses some practical implications and additional implementation options. The mass and energy flows of a biomass plant retrofitted with an iron-based redox loop are calculated for nine specific scenarios that exemplify its operation under electricity generation mixes that differ with respect to variability and price. In addition, the use of two types of electrolyzers (low-temperature and high-temperature versions) is investigated. The results show that for the Swedish case, the proposed scheme is technically feasible and capable of covering the national DH demand by making use of the existing DH plants, with an estimated process energy efficiency (electricity to heat) of 90%. The results also show that for a retrofit of the entire Swedish DH fleet, the required inventories of iron are approximately 2.8 Mt for the intermediate scenario, which represents 0.3% and 11.0% of the national reserves and annual metallurgical production rates of the national industry, respectively. In addition to the dispatchable heat, the process generates a significant amount of nondispatchable heat, especially for the case that employs low-temperature electrolyzers. This added generation capacity allows the process to cover the heat demand while decreasing the maximum capacity of the charging side computed herein. [ABSTRACT FROM AUTHOR]

Biofuel is an attractive alternative to fossil fuels since it is renewable and biodegradable—it is mainly made from edible and non-edible sources. Globally, the usage of renewable biofuels is expected to rise quickly. The rising production and use of biofuel has prompted an examination of its environmental impact. Biodiesel is a fatty acid methyl ester generated from sustainable lipid feedstock that substitutes petroleum-based diesel fuel. Non-food oils, such as Jatropha, waste cooking oil, and by-products of vegetable oil from refineries provide inexpensive feedstock for biodiesel manufacturing. Due to its increased oil yield, adequate fatty acid content, tolerance to various agro-climatic conditions, and short gestation period, Jatropha may be one of the most promoted oilseed crops worldwide. Furthermore, Jatropha can provide several economic and agronomic advantages because it is a biodegradable, renewable plant. This study examines whether Jatropha can be considered as the most preferable biofuel in the future. The study begins with an overview of current fuels, including their classifications, dynamic changes in consumption, advantages, and cross-examining the limitations to identify the significance of bringing an alternate fuel. Then we elaborate on the outlook of the Jatropha crop, followed by evaluating its availability, opportunity, and advantages over other biofuels. Subsequently, the extraction methods, including the transesterification process and integration methods for improving the efficiency of Jatropha fuel, are also reviewed in the paper. We also assess the current stage of Jatropha cultivation in different countries with its challenges. The review concludes with future perspectives and directions for research. [ABSTRACT FROM AUTHOR]

Agricultural biomass is one of the most important renewable energy sources. As a byproduct of corn, soybean and sunflower production, large amounts of biomass are produced that can be used as an energy source through conversion. In order to assess the quality and the possibility of the use of biomass, its composition and calorific value must be determined. The use of nonlinear models allows for an easier estimation of the energy properties of biomass concerning certain input and output parameters. In this paper, RFR (Random Forest Regression) and SVM (Support Vector Machine) models were developed to determine their capabilities in estimating the HHV (higher heating value) of biomass based on input parameters of ultimate analysis. The developed models showed good performance in terms of HHV estimation, confirmed by the coefficient of determination for the RFR (R2 = 0.79) and SVM (R2 = 0.93) models. The developed models have shown promising results in accurately predicting the HHV of biomass from various sources. The use of these algorithms for biomass energy prediction has the potential for further development. [ABSTRACT FROM AUTHOR]

This paper offers an algorithm to account for potential actions on the efficient production of renewable energy. The algorithm consists of a substantiated choice of a certain type of renewable energy, the evaluation of its potential, and the regulation of the processes of obtaining that renewable energy. Also, potential resources for agricultural biofuel production have been analyzed and it has been determined that there is real biomass potential in Lithuania. It will thus be beneficial to make appropriate managerial decisions on the methods of biofuel processing and consumption, as well as on means of receiving the economic, energy and environmental effects. The total potential of by-product biomass of crop production was determined, and the thermal and electric potential of the crop by-products were calculated. Additionally, the potential for production of gas-like types of fuel (biomethane, biohydrogen, and syngas) from crop by-products was determined. The potential for the production of diesel biofuel from oil crop waste (bran) was also found, and the potential for livestock by-products for receiving gas-like types of fuel (biomethane, biohydrogen) was established. The corresponding thermal and electric equivalents of the potential were found and the potential volumes of the biomethane and biohydrogen production were calculated. The total energy equivalent equals, on average, 30.017 × 106 GJ of the thermal energy and 9.224 × 106 GJ of the electric energy in Lithuania. The total potential of biomethane production (taking into account crop production and animal husbandry wastes) on average equals 285.6 × 106 m3. The total potential of biohydrogen production on average equals 251.9 × 106 m3. The cost equivalents of the energy potential of agrarian biomass have been calculated. The average cost equivalent of the thermal energy could equal EUR 8.9 billion, electric energy—EUR 15.9 billion, biomethane—EUR 3.3 billion and biohydrogen—EUR 14.1 billion. The evaluation of the agricultural biomass potential as a source of renewable energy confirmed that Lithuania has a large biomass potential and satisfies the needs for the production of renewable energy. Thus, it is possible to move to the second step, that of making a decision concerning biomass conversion. [ABSTRACT FROM AUTHOR]

Moving towards RER has become imperative to achieve sustainable development goals (SDG). Renewable energy resources (RER) are characterized by uncertainty whereas, most of them are unpredictable and variable according to climatic conditions. This paper focuses on RER-based electrical power plants as a base to achieve two different goals, SDG7 (obtaining reasonably priced clean energy) and SDG13 (reducing climate change). These goals in turn would support other environmental, social, and economic SDG. This study is constructed based on two pillars which are technological developments and life cycle assessment (LCA) for wind, solar, biomass, and geothermal power plants. To support the study and achieve the main point, many essential topics are presented in brief such as fossil fuels' environmental impact, economic sustainability linkage to RER, the current contribution of RER in energy consumption worldwide and barriers and environmental effects of RER under consideration. As a result, solar and wind energy lead the RER electricity market with major contributions of 27.7% and 26.92%, respectively, biomass and geothermal are still of negligible contributions at 4.68% and 0.5%, respectively, offshore HAWT dominated other WT techniques, silicon-based PV cells dominated other solar PV technologies with 27% efficiency, combustion thermochemical energy conversion process dominated other biomass energy systems techniques, due to many concerns geothermal energy system is not preferable. Many emerging technologies need to receive more public attention, intensive research, financial support, and governmental facilities including effective policies and data availability. [ABSTRACT FROM AUTHOR]

The Clean Forest project aims to valorize forest biomass wastes (and then prevent their occurrence as a fuel source in forests), converting it to bioenergy, such as the production of 2nd generation synthetic biofuels, like bio-methanol, bio-DME, and biogas, depending on the process operating conditions. Valorization of potential forest waste biomass thus enhances the reduction of the probability of occurrence of forest fires and, therefore, presents a major value for local rural communities. The proposed process is easy to implement, and energetically, it shows significantly reduced costs than the conventional process of gasification. Additionally, the input of energy necessary to promote electrolysis can be achieved with solar energy, using photovoltaic panels. This paper refers to the actual progress of the project, as well as the further steps which consist of a set of measures aimed at the minimization of the occurrence of forest fires by the valorization of forest wastes into energy sources. [ABSTRACT FROM AUTHOR]

The Chinese government places significant importance on biomass energy due to its renewable and environmentally friendly attributes. However, the high cost of power generation poses a considerable hurdle to its development. This study aims to address the challenges facing the profitability and sustainable development of biomass power generation after the gradual withdrawal of the Chinese government by proposing a day-ahead real-time market-based trading strategy. It is prompted by the incentives offered by the Chinese government for the ongoing power market reform. This strategy is developed for a microgrid system that integrates biomass power generation with other renewable energy sources. The principles followed by the microgrid system include self-generation and consumption, electricity surplus sales, and electricity shortfall procurement. During the day-ahead stage, peak and valley tariffs are decided by the microgrid operator to exert influence on the incentives of capacity providers in accordance with the load trends, while in the intraday stage, the supply-demand imbalance is resolved by the stored electricity. In the trading process, marginal production and marginal pricing are specified to ensure the minimum trading volume and price for capacity traders, ensuring their profitability. It is demonstrated in this study that the trading strategy presented is more effective than conventional fixed-price trading in making biomass power generation profitable and sustainable, even after the Chinese government subsidy is phased out. Moreover, the other participant in the microgrid system can boost their earnings when compared to generating power individually for trading. [ABSTRACT FROM AUTHOR]

Nowadays, there is an urgent necessity for breakthrough technologies able to reduce process complexity and to lower costs to make the biomass-based biodiesel supply chain competitive. This paper presents an innovative methodology for the identification of secondary biomass potentials for biofuel production. The methodology, divided into four steps, defines the criteria that allow identification of promising scenarios of biomass supply chains for commercial application of innovative technologies. The model set up a scoring procedure based on carbon emission avoidance, efficient resource exploitation and sustainability indexes. Applying the four levels of analysis (biomass availability, suitability analysis, regionalization and multi-criteria analysis), the cereal straw supply chains in four European districts (Scandinavian, Hanseatic, Central European and Mediterranean) have been identified and grouped in 18 biomass supply regional clusters (BSRCs). The clusters represent the most promising hotspots where biomass availability, logistics and feedstock requirements for a novel conversion technology meet. Central European and Mediterranean districts are those with the highest cereal straw bioeconomic potentials which allow mono-feedstock supply chains and relatively high capacity of a conversion technology at 200 MWth and beyond. Central Europe has an overall bioeconomic potential of 16.249 kt (232.359 TJ) distributed over 36 regions and organized in 12 BSRCs. The Mediterranean district has an overall bioeconomic potential of 3541 kt (50.630 TJ) distributed over nine regions and organized in four BSRCs. [ABSTRACT FROM AUTHOR]

- The fuel transport mode choice was based on the proximity to infrastructure and not to main transport stations, which could increase fuel transportation costs, which constitute an important part of the overall costs. Solid biomass has been around for centuries and liquid biofuels for transport have been around for decades. From the results presented in this study, it is clear that, besides the crucial production of biomass and intermediates at low costs, it is also necessary to reduce transportation and industrial costs. [Extracted from the article]

Biomass use for energy and materials is, on the one hand, one of the key mitigation options to reach the 1.5 °C GMT target set in the Paris Agreement, as highlighted by the IPCC and many other key analyses. On the other hand, particularly in parts of the EU, a strong negative connotation has emerged in public debate and EC policy, with a particular emphasis on the (presumed) displacement effect in markets and land use. This is a remarkable contrast because the reasons to use sustainable biomass, on the one hand, and the possibilities and synergies for supplying sustainable biomass, on the other, are underpinned with strong evidence, also providing insights on how displacement issues can be avoided. Sustainable biomass supplies can contribute 20–30% of the future global and European energy supply, leading to reduced overall mitigation costs, including realizing the net CO2 removal from the atmosphere using BECCS concepts. This paper highlights which options, pathways and preconditions are key to achieving such a substantial contribution of sustainable biomass in future (2050) energy and material supply (with a focus on the European setting). By pinpointing how "biomass can be done right" and how important synergies can be achieved via better agricultural methods, the restoration of marginal and degraded lands and the adaptation of climate change, a different policy agenda emerges in sharp contrast to how a biobased economy has been framed in recent years. It is recommended that future policy priorities, particularly at the EU level, take a more integral view on the synergy between the role of biomass in the energy transition, climate adaptation and mitigation, better agriculture and the better use of land in general. Strategies to achieve such positive results typically require an alignment between renewable energy, and agricultural, environmental, mitigation and adaptation policies, which is a largely missing nexus in different policy arenas. Resolving this lack of alignment offers a major opportunity, globally, to contribute to the European Green deal and improve energy security. [ABSTRACT FROM AUTHOR]

Methanol is considered to be a viable option for reducing greenhouse gas (GHG) emissions in shipping, the second-highest emitter after road freight. However, the use of fossil methanol is insufficient to meet climate change targets, while renewable methanol is yet unavailable on a commercial scale. This paper presents a novel biorefinery concept based on biomass solvolysis to produce crude lignin oil (CLO) from forest residues, a drop-in biofuel for methanol-propelled ships, and evaluates its environmental and economic profiles. In the base scenario, CLO can achieve emission saving of 84% GHG compared to fossil alternatives, and a minimum selling price (MSP) of $821 per ton of methanol equivalent (ME), i.e., within the range of the current bio-methanol production costs. The emission of GHGs of co-produced ethanol can be reduced by 67% compared to fossil analogues. The increase of renewable electricity share to 75% is capable of shrinking emissions by 1/5 vs. the base case, while fossil methanol losses, e.g., of that in cellulose pulp, can boost emissions by 63%. Low-pressure steam use in the biomass pretreatment, as well as biorefinery capacity increase by a factor of 2.5, have the greatest potential to reduce MSP of CLO to $530 and $614 per ton of ME, respectively. [ABSTRACT FROM AUTHOR]

The importance of biomass for energy production is included in the government program "Energy Policy of Poland until 2040". Biomass is one of the most stable renewable energy sources (RES), and its resources are the largest of all alternative energy sources. The paper presents and discusses the most important conditions that are related to the possible usage of the biomass that is obtained from agriculture for heating purposes. The aim of the study is to assess the energy potential of a selected agro-biomass and to indicate its effective use for the production of district heat. The research uses: in-depth statistical data analysis (data were obtained from the Central Statistical Office and the Agency for Restructuring and Modernization of Agriculture), inference methods, short- and long-term forecasting, the minimum spanning tree (MST) algorithm, and methods of single- and multi-criteria optimization for the selection of the most advantageous variant. The research covers three different scenarios: optimistic, moderate, and pessimistic. The results of the study present: technical and energy potential of biomass, taking into account its type, energy properties, and places of its collection; optimum location of intermediate storage and processing sites; and the optimum storage frequency of its transport to energy companies. [ABSTRACT FROM AUTHOR]

Enzymatic Biofuel Cell (EBC) represents a promising green source since it is capable of harvesting electricity from renewable and abundantly available biofuels using enzymes as catalysts. Nevertheless, nowadays long-term stability and low power output are currently the main concerns. To this end, several research studies focus on using complex tridimensional and highly expensive nanostructures as electrode support for enzymes. This increases cell performance whilst drastically reducing the economic feasibility needed for industrial viability. Thus, this paper analyzes a novel flow-based EBC consisting of covalent immobilized GOx (bioanode) and Laccase (biocathode) on a commercial flat conductive polymer. A suitable immobilization technique based on covalent ligands is carried out to enhance EBC durability. The experimental characterization demonstrates that the cell generates power over three weeks, reaching 590 mV and 2.41 µW cm−2 as maximum open circuit voltage and power density, respectively. The most significant contributions of this configuration are definitely ease of implementation, low cost, high scalability, and reproducibility. Therefore, such a design can be considered a step forward in the viable EBC industrialization process for a wide range of applications. [ABSTRACT FROM AUTHOR]

This paper studies the effect on the rate of growth of carbon dioxide emission in seaports' atmosphere of replacing a part of the fossil fuel electrical power generation by clean renewable electrical energies, through two different scheduling strategies. The increased rate of harmful greenhouse gas emissions due to conventional electrical power generation severely affects the whole global atmosphere. Carbon dioxide and other greenhouse gases emissions are responsible for a significant share of global warming. Developing countries participate in this environmental distortion to a great percentage. Two different suggested strategies for renewable electrical energy scheduling are discussed in this paper, to attain a sustainable green port by the utilization of two mutual sequential clean renewable energies, which are biomass and photovoltaic (PV) energy. The first strategy, which is called the eco-availability mode, is a simple method. It is based on operating the renewable electrical energy sources during the available time of operation, taking into consideration the simple and basic technical issues only, without considering the sophisticated technical and economical models. The available operation time is determined by the environmental condition. This strategy is addressed to result on the maximum available Biomass and PV energy generation based on the least environmental and technical conditions (panel efficiency, minimum average daily sunshine hours per month, minimum average solar insolation per month). The second strategy, which is called the Intelligent Scheduling (IS) mode, relies on an intelligent Reconfigured Whale Optimization Technique (RWOT) based-model. In this strategy, some additional technical and economical issues are considered. The studied renewable electrical energy generation system is considered in two scenarios, which are with and without storage units. The objective (cost) function of the scheduling optimization problem, for both scenarios, are developed. Also, the boundary conditions and problem constraints are concluded. The RWOT algorithm is an updated Whale Optimization Algorithm (WOA). It is developed to accelerate the rate of reaching the optimal solution for the IS problem. The two strategies simulation and implementation are illustrated and applied to the seaport of Damietta, which is an Egyptian port, located 10 km to the west of the Nile River (Damietta Branch). The scheduling of PV and biomass energy generation during the different year months is examined for both strategies. The impact of renewable electrical energies generation scheduling on carbon dioxide emission and consequently global warming is discussed. The saving in carbon dioxide emission is calculated and the efficient results of the suggested models are clarified. The carbon dioxide emission is reduced to around its fifth value, during renewable energy operation. This work focuses on decreasing the rate of growth of carbon dioxide emission coming from fossil fuel electrical power generation in Egypt, targeting, sustainable green seaports, through three main contributions in clean renewable electrical energies scheduling. The contributions are: 1-presenting the eco-availability mode for minimum gifted biomass and PV energy generation, 2-developing and progressing the IRWOT scheduling strategy for both scenarios (with and without storage unit), 3-defining the scheduling optimization problem boundary conditions and constraints. [ABSTRACT FROM AUTHOR]

Variability on the physical characteristics of feedstock has a relevant effect on the reactor's reliability and operating cost. Most of the models developed to optimize biomass supply chains have failed to quantify the effect of biomass quality and preprocessing operations required to meet biomass specifications on overall cost and performance. The Integrated Biomass Supply Analysis and Logistics (IBSAL) model estimates the harvesting, collection, transportation, and storage cost while considering the stochastic behavior of the field-to-biorefinery supply chain. This paper proposes an IBSAL-SimMOpt (Simulation-based Multi-Objective Optimization) method for optimizing the biomass quality and costs associated with the efforts needed to meet conversion technology specifications. The method is developed in two phases. For the first phase, a SimMOpt tool that interacts with the extended IBSAL is developed. For the second phase, the baseline IBSAL model is extended so that the cost for meeting and/or penalization for failing in meeting specifications are considered. The IBSAL-SimMOpt method is designed to optimize quality characteristics of biomass, cost related to activities intended to improve the quality of feedstock, and the penalization cost. A case study based on 1916 farms in Ontario, Canada is considered for testing the proposed method. Analysis of the results demonstrates that this method is able to find a high-quality set of non-dominated solutions. [ABSTRACT FROM AUTHOR]

Taking a European Union focus, this paper explicitly models competing uses of biomass to quantify its contribution toward a sustainable low carbon model of economic growth. To this end, a state-of-the-art multisector multiregion modelling tool is combined with a specially developed bio-based variant of a well-known global database. Employing a decomposition method of the market drivers and classifying alternative future pathways, the aim is to understand how public policies can influence the apparent trade-off between the goals of lower carbon economic growth, environmental preservation and sustainable biomass usage. Results reveal that in targeting specific societal goals public policy can be effective, although this can lead to broader economic issues of resource inefficiency and even direct policy conflicts. [ABSTRACT FROM AUTHOR]

This paper presents a tool for the analysis of conversion of organic waste into energy. The tool is a program that uses waste characterization parameters and mass flow rates at each stage of the waste treatment process to predict the given products. The specific waste treatment process analysed in this paper is anaerobic digestion. The different waste treatment stages of the anaerobic digestion process are: conditioning of input waste, secondary treatment, drying of sludge, conditioning of digestate, treatment of digestate, storage of liquid and solid effluent, disposal of liquid and solid effluents, purification, utilization and storage of combustible gas. The program uses mass balance equations to compute the amount of CH4, NH3, CO2 and H2S produced from anaerobic digestion of organic waste, and hence the energy available. Case studies are also presented. [ABSTRACT FROM AUTHOR]

South Africa has been experiencing an energy crisis since 2007 and continues to the present. This has resulted in load-shedding (action to interrupt electricity supply to avoid excessive load on the generating plant). One way to address this problem is to further explore the potential and contribution of bioenergy through research conducted and implementing energy reports. Therefore, the study aims to provide the state of bioenergy and its contribution to the country's economic sector and to enhance the replacement of fossil fuels with bioenergy resources and technology. A total blackout of 15,913 h has been experienced since 2014, according to the weekly system status report released by ESKOM. The power utility (Eskom) responsible for power generation and utility has attributed this problem to insufficient generation and capacity. Based on this, the country is embarking on solving this problem. Although the country is dominated by coal (fossil fuel), constituting 73.8% of the total energy supply, this poses a serious environmental risk and health hazard. Renewable energy is considered an alternative energy source, and its introduction and implementation look promising in reducing and solving the current energy crisis. With abundant renewable energy potential, representing 8.7% of the total energy supply, around 85% is bioenergy. This review's findings revealed that bioenergy contributed mainly towards heat, and fuels admit other energy sources, which is recommended. Therefore, its deployment on a large scale is promising and possible. This study will guide and further encourage the deployment of bioenergy projects in South Africa. [ABSTRACT FROM AUTHOR]

Biomass-fueled organic Rankine cycles (ORCs) are widely utilized technologies for power production because of their simplicity, low cost, and relatively high efficiencies. Furthermore, raw material availability and topographical independency make these systems preferable to other renewable-fueled power generation systems. A deep and comprehensive understanding of biomass-fueled organic Rankine cycles will provide researchers with a solid foundation to prioritize their investigations and assist future developments in this field. In this regard, feedstocks and their properties, biomass conversion mechanisms, and biomass-fueled power generation systems are discussed in this study. Power generation technologies based on coal and waste as feedstock have been widely investigated in the literature due to higher energy content and technological maturity. Additionally, depending on the type of biomass available, the scale of the power plant, and economic and environmental considerations, the most common technologies utilized for biomass conversion are combustion, gasification, and anaerobic digestion. Finally, the authors investigate various aspects of biomass-fueled organic Rankine cycles, including working fluids, analysis methods, and environmental issues. Since maximizing product yield is key in biomass-based power generation systems, technical assessment of these systems has been a primary focus of many studies. Further research is required on integrated environmental and socio-economic approaches, along with Machine Learning algorithms. Future advancements focusing on integration of feedstock with other renewable energy sources, efficient working fluids like nanofluids, and high-tech heat exchangers will drive the development of biomass-fueled ORC systems. [ABSTRACT FROM AUTHOR]

The growing demand for social and regulatory forest ecosystem services can significantly modify the availability and cost of biomass for energy purposes. This article presents a model for optimizing biomass supply chains using a linear programming framework integrated with a geographic information system (GIS). Based on a given type of biomass resource, its calorific value, price, distance from the power plant, and transportation costs, the model identifies the optimal source of biomass, allowing it to cover the demand for the required total energy value with the lowest possible costs. The case study includes the Połaniec power plant in southeastern Poland and potential sources of forest biomass and agricultural straw within 100 km of the plant. The impact of constraints on the availability and cost of biomass was analyzed in the following scenarios: (1) all forest and agriculture biomass is available, (2) forest area in Natura 2000 network is excluded, and (3) firewood and forests with dominated ecological and social function are excluded. Unit costs of biomass varied depending on biomass availability and energy demands. The lowest unit costs of biomass (3.19 EUR/MJ) were for energy demand at the level of 1 TJ yearly for all kinds of biomass and the highest (4.91 EUR/MJ) for ecological and social constraints and energy demand 4 TJ. As energy demand increased, unit costs increased, and the ability to meet this demand with just one type of biomass decreased. The energy biomass sector can utilize the model to benefit both biomass producers and their final buyers. [ABSTRACT FROM AUTHOR]

The production of orange (Citrus sinensis) generates many residues, and the few that are used are usually by-products of the fruit juice processing industry. Among the residues, wood is potentially advantageous for use in bioenergy, but with few records in the literature. In this sense, this study sought to evaluate the feasibility of using orange wood for energy purposes by performing chemical characterization, immediate analysis, FTIR, calorific value, thermogravimetry and bulk and energetic densities for three compositions: 100% trunk (100T), 90% trunk + 10% bark (90T10B) and 100% bark (100B). 100T showed a higher fixed carbon content (16.76%) and equality with 90T10B in lignin, holocellulose, useful calorific value and volatile materials. 100B presented higher extractives and ash contents of 19.67% and 10.35%, respectively. The FTIR spectra and thermogravimetric curves were similar in 100T and 90T10B. 100B showed more stages of degradation and a higher incidence of peaks in the range 780–612 cm−1. The bulk density was equal in 100T and 90T10B, but the energy density was higher in 100T (6.16 Gj.m−3). 100T and 90T10B are good options for bioenergy and the chemical composition and thermal degradation of 100B point to new investigations in this composition. [ABSTRACT FROM AUTHOR]

The need to contain climate change and improve energy security has increased the interest in agricultural biomass as a renewable energy source (RES). Given the complexity of the issue of energy production and its environmental impact, the main objective of this study was to assess the significance and potential of the agriculture of the European Union Member States in terms of the capability of producing renewable energy. Using the multi-criteria TOPSIS (Technique for Order of Preference by Similarity to Ideal Solution) method, we designed a synthetic measure based on several diagnostic characteristics for 2010–2021, obtaining a ranking for EU countries reflecting their agriculture's RES potential. The research showed that the agricultural sectors with the highest potential for renewable energy production were in the Netherlands, Lithuania, Latvia, and Hungary during the study period. Bulgaria, Denmark, and Spain joined this group in 2021. A comprehensive assessment was conducted using the TOPSIS method to identify the leaders and areas in need of support in leveraging the potential of agriculture for energy in the EU. [ABSTRACT FROM AUTHOR]

This comprehensive review examines the role of sustainable aviation fuels (SAFs) in promoting a more environmentally responsible aviation industry. This study explores various types of biofuels, including hydroprocessed esters and fatty acids (HEFAs), Fischer–Tropsch (FT) fuels, alcohol-to-jet (ATJ) fuels, and oil derived from algae. Technological advancements in production and processing have enabled SAF to offer significant reductions in greenhouse gas emissions and other pollutants, contributing to a cleaner environment and better air quality. The review addresses the environmental, economic, and technical benefits of SAF, as well as the challenges associated with their adoption. Lifecycle analyses are used to assess the net environmental benefits of SAF, with a focus on feedstock sustainability, energy efficiency, and potential impacts on biodiversity and land use. Challenges such as economic viability, scalability, and regulatory compliance are discussed, with emphasis on the need for supportive policies and international collaboration to ensure the long-term sustainability of SAF. This study also explores current applications of SAF in commercial airlines and military settings, highlighting successful case studies and regional differences driven by policy frameworks and government incentives. By promoting technological innovation and addressing regulatory and economic barriers, SAF has the potential to play a crucial role in the aviation industry's transition toward sustainability. [ABSTRACT FROM AUTHOR]