Search

Post-occupancy evaluations are common tools used to periodically assess Indoor Environmental Quality (IEQ) in tertiary buildings. Although the large amount of data collected from surveys contain valuable information, the influence of building characteristics on IEQ considering the different uses of the rooms and different types of occupants is rarely considered in the evaluation. This study presents an analysis of the association between building characteristics and IEQ in different building rooms (classrooms and offices) and different occupants (students and lecturers) using a post occupancy evaluation survey to 1013 occupants in 26 higher educational buildings in Spain under a Mediterranean climate. This research demonstrated that building characteristics influence IEQ perceptions of the different rooms in tertiary education buildings. The possibility of controlling the lighting, shadows or heating, ventilation air or conditioning (HVAC) systems are the most influential factors when analyzing IEQ. The findings of this research are of interest to facility managers aiming at implementing energy efficiency measures based on user-centric satisfaction or developing maintenance plans focused on IEQ enhancement. [ABSTRACT FROM AUTHOR]

The trend in energy consumption, with a particular focus on heating and cooling demand, is an issue that is relevant to the promotion of new energy policies and more efficient energy systems. Moreover, heating and cooling energy demand is expected to rise in the next several decades, mainly due to climate change as well as increasing incomes in developing countries. In this context, the building sector is currently a relevant energy-intensive economic sector in Morocco; it accounts for 33% of the country's total energy demand (as the sector with the second highest energy demand, after the transport sector), with the residential sector accounting for 25% and the tertiary sector accounting for 8%. Aiming to reduce energy dependence and promote sustainable development, the Moroccan government recently issued a comprehensive plan to increase the share of renewables and improve energy efficiency. This strategy includes novel thermal building regulations promoted by the Moroccan Agency for Energy Efficiency. This paper analyzes the thermal behavior and heating-cooling energy demand of a residential building located in Tangier (Morocco) as a case example, based on the country's new thermal regulations and considering specific climatological conditions. A comparison with common Moroccan residential buildings as well as with those in nearby countries with similar meteorological conditions but significant differences in terms of energy demand regulation and requirements, such as Spain, is also included. Simulations were carried out using the DesingBuilder and EnergyPlus Software packages. According to the results, the last building thermal regulation requirements in Morocco need to be revised and extended in order to achieve the energy efficiency objectives established by the Moroccan government for 2030. [ABSTRACT FROM AUTHOR]

The trend in energy consumption, with a particular focus on heating and cooling demand, is an issue that is relevant to the promotion of new energy policies and more efficient energy systems. Moreover, heating and cooling energy demand is expected to rise in the next several decades, mainly due to climate change as well as increasing incomes in developing countries. In this context, the building sector is currently a relevant energy-intensive economic sector in Morocco; it accounts for 33% of the country's total energy demand (as the sector with the second highest energy demand, after the transport sector), with the residential sector accounting for 25% and the tertiary sector accounting for 8%. Aiming to reduce energy dependence and promote sustainable development, the Moroccan government recently issued a comprehensive plan to increase the share of renewables and improve energy efficiency. This strategy includes novel thermal building regulations promoted by the Moroccan Agency for Energy Efficiency. This paper analyzes the thermal behavior and heating-cooling energy demand of a residential building located in Tangier (Morocco) as a case example, based on the country's new thermal regulations and considering specific climatological conditions. A comparison with common Moroccan residential buildings as well as with those in nearby countries with similar meteorological conditions but significant differences in terms of energy demand regulation and requirements, such as Spain, is also included. Simulations were carried out using the DesingBuilder and EnergyPlus Software packages. According to the results, the last building thermal regulation requirements in Morocco need to be revised and extended in order to achieve the energy efficiency objectives established by the Moroccan government for 2030. [ABSTRACT FROM AUTHOR]

This paper performs technical, economic and environmental feasibility analyses of two different solar cogeneration plants, consisting of a solar system (a parabolic trough collector field coupled with thermal energy storage), an Organic Rankine Cycle (ORC), and mechanical chillers, that should cover the electrical and cooling demands of a commercial center located in Zaragoza (Spain). System A is hybridized with an auxiliary biomass boiler that complements the solar system's thermal production, providing a constant heat supply to the ORC, which operates at full load during the operating hours of the solar system. In contrast, system B is not hybridized with biomass, so the ORC is fully driven by the solar system, operating at partial load according to the solar resource availability. Both systems are connected to the electrical grid, allowing electricity purchases and sales when needed. The design procedure involves the sizing of the equipment as well as the modelling of the hourly behavior of each system throughout the year. The physical analysis is complemented by an economic assessment, which considers investment and variable costs, as well as an estimate of the significant environmental benefits of the proposed plants. The solar plants are compared to a conventional system in which all the electrical consumption is covered with electricity purchased from the grid. The costs of the electricity produced by systems A and B are estimated at 0.2030 EUR/kWh and 0.1458 EUR/kWh, which are about 49% and 7% higher than the electricity purchase price in Spain (0.1363 EUR/kWh). These results indicate that while none of the solar plants are presently competitive with the conventional system, system B (without biomass hybridization) is actually closer to economic feasibility in the short and medium term than system A (with biomass hybridization). [ABSTRACT FROM AUTHOR]

The energy improvement of building stock is essential to achieve a low-carbon economy. The improvement of façades is among the most common measures to reduce energy consumption. However, the effect of thermal bridges is undervalued in most cases. This study assesses the effect of improving building façades and thermal bridges. For this purpose, a case study is assessed for all climate zones in Spain, both in current and future scenarios, considering operational patterns from the COVID-19 pandemic. The study shows that the application of energy conservation measures focusing on reducing the thermal transmittance of façades and the linear thermal transmittance of thermal bridges has a more significant energy and environmental effect than other, more economical energy conservation measures that do not improve the effect of thermal bridges. Likewise, the application of energy conservation measures to improve façades can reduce carbon dioxide emissions but are far from achieving the 90% reduction set by the European Union by 2050. Consequently, these measures should be combined with other measures. [ABSTRACT FROM AUTHOR]