Search

Modern explosion protection equipment, protected by traditional explosion protection technology (as defined by the international electrotechnical commission (IEC) publication IEC60079-ff series standards) and electrical/electronic/programmable electronic (E/E/PE) safety-related systems, is becoming ever more complex in coal mine development and petrochemical industry; thus, the possibility of failures in their operation is also growing. It is well-known that E/E/PE safety-related systems can be used to actively control dangerous sources, with real and expected levels of reliability, if they have been qualified according to the IEC61508-ff series standards. To uniformly evaluate the safety integrity level (SIL) of the explosion protection function of traditional explosion protection technology and E/E/PE safety-related system technology, this study analyzed the ability of these types of protection to remove the ignition risk residual, evaluating the failure rates of safety devices. The key objective of this paper is the presentation of a new equipment protection level (EPL) assessment method for explosion protection equipment based on a functional safety assessment. The method is applied to a variable frequency drive (VFD) system, and the results show that the EPL of the explosion protection equipment evaluated by this method is consistent with the EPL corresponding to the traditional explosion protection type of the IEC60079-ff series standard. Meanwhile, the flexible configuration of explosion protection safety devices and E/E/PE safety-related systems enables explosion protection equipment of different EPL levels to be designed. [ABSTRACT FROM AUTHOR]

Multi-level converters are widely used in various industrial applications. Among various space vector modulation (SVM) schemes, the multi-level SVM scheme based on two-level space vector pulse width modulation (SVPWM) is recognised as a simplified multi-level SVM scheme, which can reduce the computation complexity. However, this scheme is still complicated when the number of the voltage levels is large. This paper proposes a modified SVM scheme that can further simplify the multi-level SVM scheme based on two-level SVPWM. The proposed SVM scheme can directly determine the two-level hexagon where the reference voltage vector is located by calculating a simple formula. The whole modulation process can be completed by only three steps. Meanwhile, the proposed method is generic for any n-level converter without adding much calculation, which greatly simplifies the modulation process. Experimental results have been provided, which verify the effectiveness and generality of the proposed SVM scheme for two types of multi-level converters. [ABSTRACT FROM AUTHOR]

In low and medium voltage power conversion systems, multilevel converters are becoming more and more attractive due to improved power density. However, the complexity of topology and control is a big challenge for the application of multilevel converters. In this paper, a four-level (4L) hybrid flying capacitor (FC) T-type converter has been researched in detail. The topological advantage of the converter is displayed in comparison to existing four-level converters. According to the feature of the topology, the operating status has been analyzed and the reason for the voltage jump is researched in detail during the dead-time period. A strategy to reduce voltage jump by adjusting the switching states has be presented. The FC voltages can be balanced by selecting the appropriate switching states. The relationships between the fluctuations of FC voltages and the modulation index and power factor (PF) have been analyzed by simulation results. The performance of the 4L converter has been investigated in MATLAB/Simulink as well as on a down-scaled laboratory prototype. [ABSTRACT FROM AUTHOR]

The large mining height fully mechanized top-coal caving mining technique has developed rapidly and become the most extensively used mining method for ultra-thick coal seams. The arching of coal/gangue and the drawing out of gangue are peculiar phenomena in the process of fully mechanized top-coal caving mining, which not only affects the recovery of top-coal, but also affects the quality of the coal. This paper studies the arching phenomenon in top-coal caving mining process of ultra-thick coal seam. A series of laboratory granular material simulation experiments were performing and a top-coal arching model in the framework of mechanics was established to explore the formation characteristic of arches and their effects to top-coal loss. Then the countermeasures against the arches and technology path of intelligent mining based on improving top-coal recovery were put forward and performed in practice. The results show that the recovery ratio of top-coal has increased nearly 6%, and increased the production efficiency at the same time. The research on arching mechanism and removing strategies of dynamic random arches effectively improves the efficiency of fully mechanized top-coal caving mining in ultra-thick coal seams, and provides the foundation for the realization of intelligent top-coal caving mining technology. [ABSTRACT FROM AUTHOR]