Search

This article presents the comparison of 3D and 2D finite element models of a power transformer designed for reactive power compensation stations. There is a lack of studies in the literature on internal electromagnetic phenomena in the active part of a transformer operated in these conditions. The results of numerical 2D and 3D calculations of no-load current and losses in the transformer core were obtained by using various methods and models. The impact of considering the hysteresis loop phenomenon on the calculation of core losses was investigated by using the Jiles–Atherton core losses model. The results obtained in the paper show that the model of the core must contain the areas representing the influence of overlappings on the no-load current and also on the flux density field in the core. The capacitive load of the transformer increases the flux density in the core limbs by several percent, so the power losses there must also increase accordingly. As a summary of the research, differences in the values of losses in each core element between the capacitive load and no-load conditions are presented. The results presented in this paper indicate that considering nonlinearity related to the magnetic hysteresis loop has a significant impact on the calculation of the core losses of power transformers. [ABSTRACT FROM AUTHOR]

Given the concern for maintaining voltage stability in power systems integrated with renewable power systems due to a mismatch in generation and demand, there remains a need to invoke flexible alternating current transmission system (FACTS) devices in the distribution network. The present paper deals with identifying the locations of placement of a static var compensator in an experimental IEEE 14-bus system; the voltage drop in different buses in an IEEE 14-bus system is calculated by the standard formula. The total voltage drop in the network (TVDN) is also calculated as a reference. The ranking of buses in order of decreasing voltage drop is made, and the weak buses are identified as those showing the maximum or near-maximum voltage drop for the installation of a Static Var Compensator (SVC). The optimum usable size is calculated using a Genetic Algorithm approach to optimize the installation cost. After size optimization, installing a 2 MW solar generator is considered for the weak and most potential bus, which suffers from voltage drops or power loss. Based on the generator at the weakest bus, the total power loss in the network is calculated and compared with a similar method to assess the efficiency of the proposed model. Thus, the voltage stability enhancement problem is solved by applying a Genetic algorithm (GA) to optimize SVC size and using the Total Voltage Drop in Network (TVDN) method to identify weak buses in the systems. It is found that the performance of the proposed system is comparable with another existing system. It is further observed that a gain in power loss to 6.56% is achievable by adopting the proposed strategy, and the gain is better than the other system. [ABSTRACT FROM AUTHOR]

This paper presents an improved Teaching-Learning-Based Optimization (TLBO) for optimal tuning of power system stabilizers (PSSs) and static VAR compensator (SVC)-based controllers. The original TLBO is characterized by easy implementation and is mainly free of control parameters. Unfortunately, TLBO may suffer from population diversity losses in some cases, leading to local optimum and premature convergence. In this study, three approaches are considered for improving the original TLBO (i) randomness improvement, (ii) three new mutation strategies (iii) hyperchaotic perturbation strategy. In the first approach, all random numbers in the original TLBO are substituted by the hyperchaotic map sequence to boost exploration capability. In the second approach, three mutations are carried out to explore a new promising search space. The obtained solution is further improved in the third strategy by implementing a new perturbation equation. The proposed HTLBO was evaluated with 26 test functions. The obtained results show that HTLBO outperforms the TBLO algorithm and some state-of-the-art algorithms in robustness and accuracy in almost all experiments. Moreover, the efficacy of the proposed HTLBO is justified by involving it in the power system stability problem. The results consist of the Integral of Absolute Error (ITAE) and eigenvalue analysis of electromechanical modes demonstrate the superiority and the potential of the proposed HTLBO based PSSs and SVC controllers over a wide range of operating conditions. Besides, the advantage of the proposed coordination design controllers was confirmed by comparing them to PSSs and SVC tuned individually. [ABSTRACT FROM AUTHOR]

This paper presents a control scheme of a wide-area controlled static VAr compensator (WAC-SVC) and its real-time implementation in a hardware-in-the-loop (HIL) simulation scheme with three control objectives: (1) to increase the critical clearing time, (2) to damp the power oscillations, and (3) to minimize the maximum line current. The proposed control scheme considers a correction strategy to compensate the delays up to 200 ms. In addition to this, a generator tripping scheme based on synchrophasor measurements to determine the proximity to the loss of synchronism is proposed. A delay compensation algorithm based on polynomial approximations is also developed. The proposed WAC-SVC is experimentally validated using a Real-Time Digital Simulator platform (RTDS), industrial communication protocols, a commercial device for PMU-based control implementations, and digital relays with PMU capability. The real-time simulation results confirm its effectiveness and feasibility in real industrial applications. Furthermore, practical guidelines to implement this kind of control schemes are provided. [ABSTRACT FROM AUTHOR]