Search

Flexible alternating current transmission systems (FACTSs) have been widely incorporated in electric power systems in order to control system parameters. This paper proposes the modeling of four FACTS devices, using the Branch Flow Model (BF) as an optimization problem to reduce the complexity of the Newton–Raphson (NR) load flow code with FACTS devices. The devices are represented as variable impedances, as a function of a firing angle, and as voltage source converters (VSCs) located on the buses and transmission lines. This proposed model solves the problem associated with the selection of appropriate initial conditions of the parameters of each device that guarantee convergence. The model is validated by evaluating its percentage deviation with respect to the NR method, using the standard test systems, IEEE 5-bus, IEEE 14-bus, IEEE 30-bus, and IEEE 57-bus systems. [ABSTRACT FROM AUTHOR]

Given the concern for maintaining voltage stability in power systems integrated with renewable power systems due to a mismatch in generation and demand, there remains a need to invoke flexible alternating current transmission system (FACTS) devices in the distribution network. The present paper deals with identifying the locations of placement of a static var compensator in an experimental IEEE 14-bus system; the voltage drop in different buses in an IEEE 14-bus system is calculated by the standard formula. The total voltage drop in the network (TVDN) is also calculated as a reference. The ranking of buses in order of decreasing voltage drop is made, and the weak buses are identified as those showing the maximum or near-maximum voltage drop for the installation of a Static Var Compensator (SVC). The optimum usable size is calculated using a Genetic Algorithm approach to optimize the installation cost. After size optimization, installing a 2 MW solar generator is considered for the weak and most potential bus, which suffers from voltage drops or power loss. Based on the generator at the weakest bus, the total power loss in the network is calculated and compared with a similar method to assess the efficiency of the proposed model. Thus, the voltage stability enhancement problem is solved by applying a Genetic algorithm (GA) to optimize SVC size and using the Total Voltage Drop in Network (TVDN) method to identify weak buses in the systems. It is found that the performance of the proposed system is comparable with another existing system. It is further observed that a gain in power loss to 6.56% is achievable by adopting the proposed strategy, and the gain is better than the other system. [ABSTRACT FROM AUTHOR]

The strategic intent of the African Union is to develop a "Smart Integrated African Electric Power Super Grid" driven by modern tools and advances in high-voltage direct current (HVDC) engineering and flexible alternating current technology systems (FACTS), which is central in supporting Africa's sustained economic growth and development. The southern African region, including South Africa, is beset by the critical challenges of perennial load-shedding, which impedes economic growth and aggravates unemployment. This has led to the insecurity of electricity supplies and degraded the quality of life. The parallel operation of high-voltage direct current (HVDC) and flexible AC technology systems (FACTS) controllers is gaining traction as system conditions become more complex, such as weak power networks which requires increased stability requirements, resulting in load-shedding and power outages. These adversely affect business productivity and adversely affect GDP and economic growth. Thus, the application of innovative technologies such as HVDC links can stabilize weak power systems. It is established that HVDC delivery systems reduce losses in long transmission lines transporting bulk power compared with high-voltage alternating current (HVAC) transmission lines for power wheeling. This paper evaluates the parallel operation of the Cahora Bassa 1414 km bipolar HVDC link and a weak parallel 400/330 kV alternating current (AC) link. It demonstrates the use of FACTS controllers to enhance the technical performance of an existing network, such as voltage control, and technical loss reduction. It combines an HVDC line commutated converter (LCC) and HVAC transmission lines, in hybrid notation to increase the voltage stability of the system by controlling the reactive power with a Static Var Compensator (SVC). These modern tools can increase the transmission power controllability and stability of the power network. In this study, HVDC–LCC was used with a setpoint of 1000 MW in conjunction with the 850 MVAr SVC. The results show that the technical losses were reduced by 0.24% from 84.32 MW to 60.32 MW as Apollo 275 kV SVC was utilized for voltage control. The network analysis was performed using DIgSILENT PowerFactory software that is manufactured by DIgSILENT GmbH at Gomaringen, Germany [ABSTRACT FROM AUTHOR]

Worldwide, due to the abrupt growth of population, the load demand has been rising dramatically in the last few years. This led to an increase in branch overloads, voltage deviations, and power losses. These problems may result in line outages or the occurrence of blackouts. Flexible AC transmission system (FACTS) devices can be installed in the power system to ensure increased power flow capability and flexible voltage control to address these issues. In this paper, one of the most used FACTS is utilised. It is called Static VAR Compensator (SVC). This controller is one of the most commonly used shunt FACTS controllers due to its low cost in comparison to others, ease of operation, and integration into the power grid. Two Optimization algorithms are combined to form a hybrid optimization approach: Cuckoo Search (CS) and Antlion Optimization (ALO). This hybrid approach employs the exploration of ALO to adjust the optimum allocation and size for SVCs in the power system. This study proposes the IEEE 57 bus scheme as a fairly large structure, with the 50 and 41 branch outages considered the worst-case scenarios for line outages in this system. The simulation results show that the proposed methodology balances exploring the research space and exploiting the best existing solutions compared to some of the other introduced approaches in the literature. [ABSTRACT FROM AUTHOR]

A constant worldwide growing load stress over a power system compelled the practice of a reactive power injection to ensure an efficient power network. For this purpose, multiple technologies exist in the knowledge market out of which this paper emphasizes the usage of the flexible alternating current transmission system (FACTS) and presents a comparative study of the static var compensator (SVC) with the static synchronous compensator (STATCOM), inducted in a real electric substation. The aim is to improve the power factor (PF) and power quality and to encounter reliably extreme conditions. A 220 kV electric substation was opted for the analysis, and both the static and dynamic conditions were observed with the help of a power system analysis tool termed PowerFactory-DIgSILENT. Multiple aspects were investigated via software simulations to assess the performance of the aforementioned FACTS devices, such as the voltage profile evaluation via the load flow analysis method (LFA), the harmonic response via the power quality and harmonic analysis tool, and the short-circuit response via the RMS simulation tool. The outcomes were verified and compared with permissible values included in the universal standards, such as IEC and IEEE. The superiority of the STATCOM over the SVC was proven in light of the simulative results. [ABSTRACT FROM AUTHOR]

The static VAR generator (SVG) is an important device in flexible AC transmission systems (FACTS) for the development of smart grids. Based on the basis principle of SVG and instantaneous reactive power theory, the conventional ip-iq and dq methods have a certain error when the three phase voltages are unbalanced. In this paper, the current detection algorithm is improved in cases of three-phase power asymmetry by using the fundamental positive-sequence reactive current instead of the voltage as the input of phase locked loop (PLL). So the problems caused by unbalanced three-phase voltages could be avoided. In addition, a moving average filter is designed to improve the performance of the detection accuracy and dynamic response. Experiments verify the correctness and effectiveness of the proposed scheme. [ABSTRACT FROM AUTHOR]

In the modern power system, Flexible Alternating Current Transmission System (FACTS) devices are widely used. An increased share of the distributed generation (DG) and the development of microgrids change the power flows in the existing distribution networks as well as a conventional power flow direction from the transmission to the distribution network level which may affect the overall stability aspects. The paper shows the FACTS devices' implementation influence on the performance of the distribution network with integrated renewable energy sources (RES) observing the aspects of the oscillatory stability and the low-voltage motor starting. The FACTS devices, in particular the static var compensators (SVC), have been allocated according to a novel algorithm proposed in the paper. The algorithm uses an iterative process to determine an optimal location for implementation and rating power of SVC considering active power losses minimization, improvement of the voltage profile and maximizing return of investment (ROI) of FACTS devices. Novel constraints—transformer station construction constraint, SVC industrial nominal power value constraint and the constraint of distribution system operator (DSO) economic willingness to investment in the distribution network development are considered in the proposed algorithm. The analysis has been performed on 20 kV rural distribution network model in DIgSILENT PowerFactory software. [ABSTRACT FROM AUTHOR]