Search

Separate-layer CO2 flooding has increasingly been used to improve the overall development of multi-layer heterogeneous reservoirs. Due to their field technical limitations, layer combinations have to be carried out to reduce the number of layer-groups required for the separate injection of CO2. Currently there are few studies of the method of designing layer combinations. In field practice, the layer combinations are often made based on the permeability ratio of the layers to be developed, but it is not possible to accurately obtain the optimal scheme in many cases. Therefore, in this paper, a new design and optimization method based on the weighted standard deviation of permeability is proposed, which comprehensively considers the effects of multiple geological and fluid properties in different layers. The new method is applied to study the layer combination schemes in separate-layer CO2 flooding in H block, Daqingzijing Oilfield, Jilin, China. The prioritization of all of the schemes is obtained via the method, and a related numerical model is also established to perform verification and quantitative analysis. The results show that designing layer combinations using the new proposed method can achieve better development effect than using the conventional permeability ratio based method. It can achieve a more uniform interlayer CO2 displacement with an obvious improvement in the CO2 swept volume in low permeability layers and a higher overall oil recovery. According to the numerical simulation results, using the optimal layer combination scheme designed via the new proposed method, the ten-year swept volume of CO2 in the low permeability layer can be increased by 16.2%, and the ten-year overall oil recovery efficiency can be increased by 3.3%, with both measures showing a remarkable improvement. The work can provide a significant reference point for the field design of layer combinations in separate-layer CO2 flooding. [ABSTRACT FROM AUTHOR]

Based on the theories of mass conservation and coalbed methane (CBM) adsorption/desorption, this paper first establishes a novel reservoir pressure model for CBM production, following which, the CBM concentration and production models are also proposed. Then, these models are programmed and solved by means of the finite element method. Taking the Hunchun CBM field in Jilin province, China, as an example, the reservoir pressure, gas concentration, and production characteristics under different hydraulic fracture forms are simulated and investigated. In conclusion, the reservoir pressure decreases very rapidly in a small region near the fracture tip, which we called the "reservoir pressure singularity". The existence of a hydraulic fracture greatly reduces the reservoir pressure in the process of CBM exploitation. The permeability sensitivity coefficient of reservoir pressure, Rpk, is defined to quantitatively describe the influence of coal seam permeability on the evolution of reservoir pressure. Rpk decreases logarithmically as the distance from the CBM extraction well increases. The reservoir pressure and CBM recovery rate characteristics in the presence of multiple hydraulic fractures are also investigated. We believe these results could contribute to the design of hydraulic fracturing wells and the evaluation of gas production in a CBM reservoir. [ABSTRACT FROM AUTHOR]

There are complex pore structures in shale reservoirs, and the nonlinear flow characteristics of shale reservoirs are complicated by stress sensitivity and boundary layer effects. In this research, a new flow mathematical model was established based on capillary model, stress sensitivity and boundary layer effect. The model was verified by the experimental results of Jilin shale oil reservoir, and the influencing factors of flow characteristics were analyzed. The results show that the new shale oil flow model has good fitting and high reliability with the experimental results. The boundary layer effect and stress sensitivity are the main factors affecting the seepage characteristics. With the increase in the pressure gradient, the influence of the boundary layer effect on the flow is gradually enhanced, and the influence of the stress sensitivity on the flow is gradually weakened. At the same time, this study developed a method for the evaluation of effective displacement distance of shale oil reservoir with CO2 injection through the limited injection-production well spacing method, and obtained the nonlinear flow curve of displacement distance with reservoir permeability under different injection and production pressure difference. This research deeply studies the flow characteristics of shale oil reservoir and provides a theoretical basis for the enhanced oil recovery of shale oil with CO2 injection. [ABSTRACT FROM AUTHOR]

It is very important to effectively describe the sweep characteristics of CO2 miscible flooding based on physical models for actual reservoir development. In this study, based on the geological characteristics of the Jilin ultra-low permeability reservoir, which has significant vertical heterogeneity, a two-dimensional double-layer heterogeneous visualization model with a permeability contrast of 10 and thickness contrast of 2 was designed to perform experimental research on the sweep law of CO2 miscible flooding with an injection-production mode of "united injection and single production". With the goal of determining the obvious differences in the gas absorption capacity and displacement power of the two layers, the CO2 dynamic miscible flooding characteristics were comprehensively analyzed, and the sweep law of CO2 miscible flooding, including the oil and gas flow trend, migration direction of the oil–gas interface, and distribution characteristics of the miscible zone, was further studied in combination with the oil displacement effect. In this experiment, the gas absorption capacity was the key factor affecting the sweep efficiency of the CO2 miscible flooding. Under the combined influence of the internal and external control factors of the reservoir thickness, permeability, and injection-production mode, the gas absorption capacity of the high-permeability layer was much greater than that of the low-permeability layer, resulting in the retention of a large amount of remaining oil in the low-permeability layer, which effectively displaced and swept the oil in the high-permeability layer. The gas absorption capacity of the reservoir, gravitational differentiation, and miscible mass transfer were key factors affecting the migration of the oil–gas interface and distribution of the miscible zone. The entire displacement process could be divided into three stages: ① The gas-free rapid oil production stage, which was dominated by the displacement; ② the low gas–oil ratio stable oil production stage, which was jointly affected by the displacement and miscible mass transfer; and ③ the high gas–oil ratio slow oil production stage, which was dominated by the effect of CO2 carrying. [ABSTRACT FROM AUTHOR]

In the process of waterflooding technology in the Jilin oilfield, local radial compressive stress caused by rock deformation results in local casing collapse. According to statistics regarding casing-deformation characteristics, a certain number of these characteristics are approximately parabola-shaped at the radial-deformation bottom, and the boundary of the whole deformation area is approximately symmetrical and double-parabola-shaped. The main work of this article focused on occurrences of such casing deformation. Assuming that, in the process of casing deformation, external work is totally converted into energy consumption due to the deformation, the variation regularity of bearing capacity under local radial load was obtained. In the Qing-1 stratum of the Jilin oilfield, by selecting casing with radial collapse deformation parameters of 41/2″J55, 51/2″J55, 41/2″N80, and 51/2″N80, radial bearing capacity was calculated. Study results showed that the casing bearing-capacity value was reduced by 39.69% compared with the current API 5C3 standard when under the action of a local radial load. The casing collapsed due to the impact of local radial loads produced by mudstone creep. A series of relationships between radial bearing strength and casing parameters were also obtained. The research results are of significant academic value for the compilation of casing design codes or standards under local radial loading. [ABSTRACT FROM AUTHOR]