Search

In this paper, an enhanced version of whale optimization algorithm (EWOA) is presented to be applied in adaptive control techniques as a parameter tuner. One weakness point in this control scheme is the low efficiency of its objective function. Balloon effect (BE) is a modification introduced to increase the efficiency of the objective function of the optimization method and the ability of the controller to deal with system problems increase consequently. Controlling of the temperature of electric furnaces is considered as one of the important issues in several industrial applications. Conventional controllers such as PID controller cannot deal efficiently with the problem of parameters variations and step disturbance. This paper proposes an adaptive controller, in which the gain of the temperature controller is tuned online using EWOA supported by balloon effect. System responses obtained by the proposed adaptive control scheme using EWOA + BE have been compared with an electric furnace temperature control (EFTC) scheme response using both the PID controller-based modified flower pollination algorithm (MoFPA) and PID-accelerated PIDA-based MoFPA. From the results, it can be observed that the proposed controller tuned by the EWOA + BE method improves the time performance compared with the other techniques (PID and PIDA-based MoFPA) in case of EFTC application. [ABSTRACT FROM AUTHOR]

Unit commitment problem (UCP) is classified as a mixed-integer, large combinatorial, high-dimensional and nonlinear optimization problem. This paper suggests solving the UCP under deterministic and stochastic load demand using a hybrid technique that includes the modified particle swarm optimization (MPSO) along with equilibrium optimizer (EO), termed as MPSO-EO. The proposed approach is tested firstly on 15 benchmark test functions, and then it is implemented to solve the UCP under two test systems. The results are basically compared to that of standard EO and previously applied optimization techniques in solving the UCP. In test system 1, the load demand is deterministic. The proposed technique is in the best three solutions for the 10-unit system with cost savings of 309.95 USD over standard EO and for the 20-unit system it shows the best results over all algorithms in comparison with cost savings of 1951.5 USD over standard EO. In test system 2, the load demand is considered stochastic, and only the 10-unit system is studied. The proposed technique outperforms the standard EO with cost savings of 40.93 USD. The simulation results demonstrate that MPSO-EO has fairly good performance for solving the UCP with significant total operating cost savings compared to standard EO compared with other reported techniques. [ABSTRACT FROM AUTHOR]

The main aim of this work was the maximization of the energy saving of balanced and unbalanced distribution power systems via system reconfiguration and the optimum capacitor's bank choice, which were estimated by using a new algorithm: modified Tabu search and Harper sphere search (MTS-HSSA). The results demonstrated that the proposed method is appropriate for energy saving and improving performance compared with other methods reported in the literature for IEEE 33-bus adopted systems, including large scale systems such as IEEE 119 and the IEEE 123 unbalanced distribution system. Moreover, it can be used for unbalanced distribution systems distributed generators (DGs). The results demonstrated that the proposed method (the optimal choice of shunt capacitor (SC) banks and the optimal reconfiguration via the proposed algorithm) is appropriate for energy saving compared with different strategies for energy saving, which included distributed generation (DG) at different cost levels. [ABSTRACT FROM AUTHOR]

Energy demand has been overgrowing in developing countries. Moreover, the fluctuation of fuel prices is a primary concern faced by many countries that highly rely on conventional power generation to meet the load demand. Hence, the need to use alternative resources, such as renewable energy, is crucial in order to mitigate fossil fuel dependency, while ensuring reductions in carbon dioxide emissions. Algeria—being the largest county in Africa—has experienced a rapid growth in energy demand over the past decade due to the significant increase in residential, commercial, and industry sectors. Currently, the hydrocarbon-rich nation is highly dependent on fossil fuels for electricity generation, with renewable energy only having a small contribution to the country's energy mix. However, the country has massive potential for renewable energy generation, such as solar, wind, biomass, geothermal, and hydropower. Therefore, the government aims to diversify away from fossil fuels and promote renewable energy generation through policies and renewable energy-related programs. The country's Renewable Energy and Energy Efficiency Development Plan focuses on large scale solar, wind generation as well as geothermal and biomass technologies. This paper provides an update on the current energy position and renewable energy status in Algeria. Moreover, this paper discusses renewable energy (RE) policies and programs that aim to increase the country's renewable energy generation and its implementation status. [ABSTRACT FROM AUTHOR]

This study proposes a classical control algorithm for solving the transcendental set of equations for the unequal DC sources of five-level multilevel inverters (MLIs). Such sources can be generated from renewable energy sources. Two DC sources with different values are used to produce an output voltage with five levels. Then, a set of two transcendental equations is formulated with two targeted functions to control the fundamental component and cancel the stipulated single harmonic order. The proposed solution uses a simple classical proportional control with two loops to generate two switching angles. The first switching angle is assigned with an initial value, whereas the second one is calculated from the inner loop. The outer loop is used to cancel the specified harmonic by sending the error signal to the proposed proportional control that tunes the switching angles. The proposed algorithm is easy, fast, and accurate, and has a wide-range solution in terms of modulation index ( MI ) and input DC source ratio ( x = V 1 V 2 ≤ 1 ). The proposed algorithm is tested for a wide range of MI and x to verify its feasibility. Moreover, several simulation and laboratory tests are presented to further validate the applicability of the proposed approach. [ABSTRACT FROM AUTHOR]

Microinverters are an essential part of the photovoltaic (PV) industry with significant exponential prevalence in new PV module architectures. However, electrolyte capacitors used to decouple double line frequency make the single-phase microinverters topologies the slightest unit in this promising industry. Three-phase microinverter topologies are the new trend in this industry because they do not have double-line frequency problems and they do not need the use of electrolyte capacitors. Moreover, these topologies can provide additional features such as four-wire operation. This paper presents a detailed discussion of the strong points of three-phase microinverters compared to single-phase counterparts. The developed topologies of three-phase microinverters are presented and evaluated based on a new classification based on the simplest topologies among dozens of existing inverters. Moreover, the paper considers the required standardized features of PV, grid, and the microinverter topology. These features have been classified as mandatory and essential. Examples of the considered features for classifications are Distributed Maximum Power Point Tracking (DMPPT), voltage boosting gain, and four-wire operation. The developed classification is used to identify the merits and demerits of the classified inverter topologies. Finally, a recommendation is given based on the classified features, chosen inverter topologies, and associated features. [ABSTRACT FROM AUTHOR]