Search

This paper presents a novel modular voltage control algorithm for optimal scheduling of a distribution system's load tap changers to minimize the number of tap changes while maintaining a voltage deviation (VD) around a desired target. To this end, a bi-objective optimal voltage regulation (OVR) problem is addressed in two distinct stages. First, the operational constraint on the load tap changer is removed to form a single-objective OVR problem relating to the voltage. The solution obtained in this stage is ultimately utilized to determine the penalty value assigned to the distance from the optimal (solely in terms of voltage) control value. In the second stage, the optimal scheduling problem is formulated as a minimum-cost-path problem, which can be efficiently solved via dynamic programming. This approach allows the identification of optimal scheduling that considers both the voltage-related objective as well as the number of load tap changer switching operations with no added computational burden beyond that of a simple voltage optimization problem. The method imposes no restriction on the load tap changer's operation and is tested under two different target functions on the standard IEEE-123 test case. The first attains a nominal voltage with a 0.056 p.u. voltage deviation and the second is the well-known conservation voltage reduction (CVR) case with a 0.17 p.u. voltage deviation. The method is compared to an evolutionary-based algorithm and shows significant improvement in the voltage deviation by a factor of 3.5 as well as a computation time acceleration of two orders of magnitude. The paper demonstrates the effectiveness and potential of the proposed method as a key feature in future cutting-edge OVR methods. [ABSTRACT FROM AUTHOR]

A non-intrusive load monitoring (NILM) process is intended to allow for the separation of individual appliances from an aggregated energy reading in order to estimate the operation of individual loads. In the past, electricity meters specified only active power readings, for billing purposes, thus limiting NILM capabilities. Recent progress in smart metering technology has introduced cost-effective, household-consumer-grade metering products, which can produce multiple features with high accuracy. In this paper, a new method is proposed for applying a BIRCH (balanced iterative reducing and clustering using hierarchies) algorithm as part of a multi-dimensional load disaggregation solution based on the extraction of multiple features from a smart meter. The method uses low-frequency meter reading and constructs a multi-dimensional feature space with adaption to smart meter parameters and is useful for type I as well as type II loads with the addition of timers. This new method is described as energy disaggregation in NILM by means of multi-dimensional BIRCH clustering (DNB). It is simple, fast, uses raw meter sampling, and does not require preliminary training or powerful hardware. The algorithm is tested using a private dataset and a public dataset. [ABSTRACT FROM AUTHOR]

Recent research has enabled the integration of traditional Volt-VAr Control (VVC) resources, such as capacitor banks and transformer tap changers, with Distributed Energy Resources (DERs), such as photo-voltaic sources and energy storage, in order to achieve various Volt-VAr Optimization (VVO) targets, such as Conservation Voltage Reduction (CVR), minimizing VAr flow at the transformer, minimizing grid losses, minimizing asset operations and more. When more than one target function can be optimized, the question of multi-objective optimization is raised. In this work, a general formulation of the multi-objective Volt-VAr Optimization problem is proposed. The applicability of various multi-optimization techniques is considered and the operational interpretation of these solutions is discussed. The methods are demonstrated using a simulation on a test feeder. [ABSTRACT FROM AUTHOR]

Electric load identification and classification for smart grid environment can improve the power service for both consumers and producers. The main concept of electric load identification and classification is to disaggregate various loads and categorize them. In this paper, a new practical method for electric load identification and classification is presented. The method is based on using a power monitor to analyze a real measured current waveform of a grid-connected device. A set number of features is extracted using the currents' physical components-based power theory decomposition. Using currents' physical components ensures a constant number of features, which maintains the signal's characteristics regardless of the harmonic content. These features are used to train a supervised classifier based on two techniques: artificial neural network and nearest neighbor search. The theory is outlined, and experimental results are shown. This paper demonstrates high accuracy performance in identifying an electric load from a designated database. Furthermore, the results show a definite classification of an untrained operation state of a device to the closest trained operation state, for example, the excitation angle of a dimmer. In a comparative study, the method is shown to outperform other state-of-the-art techniques, which are based on harmonic components. [ABSTRACT FROM AUTHOR]