Search

Energy retrofit solutions that concern a building's roof structure play a significant role in the enhancement of a building's thermal behaviour. This study investigates the integration of phase change materials (PCMs) with cool coatings (CCs) or thermochromic coatings (TCCs), namely, a PCM roof, a PCM-CC roof, and a PCM-TCC roof, as alternative and novel tactics for the simultaneous control of solar heat transfer and solar heat reflection. An energy simulation analysis with the DesignBuilder tool is conducted for a one-story residence and the climatic conditions of Athens. The simulation results indicate that, compared to the existing concrete roof construction, the PCM roof, PCM-CC, and PCM-TCC roof systems demonstrate energy savings that reach up to 13.55%, 16.04%, and 21.70%, respectively. The systematic analysis reveals that the increase in PCM's thickness leads to an increase in the total electricity savings of the buildings, but in the case of PCM-CC and PCM-TCC roof systems, they merely effect the cooling thermal loads. The mean phase transition temperature that favours the cumulative electricity savings is 28 °C in the case of PCM and PCM-TCC roof systems and 35 °C in the case of PCM-CC roof systems. The methodology of this study allows the design of efficient, integrated roof systems with advanced thermal and optical properties as energy retrofit solutions for Mediterranean climatic conditions. [ABSTRACT FROM AUTHOR]

The objective of this work is the integration of a linear cavity receiver in an asymmetric compound parabolic collector. Two different numerical models were developed; one for the conventional geometry and one for the cavity configuration. Both models were examined for inlet temperatures from 20 °C up to 80 °C, considering water as the operating fluid with a typical volume flow rate of 15 lt/h. Emphasis was given to the comparison of the thermal and optical performance between the designs, as well as in the temperature levels of the fluids and the receiver. The geometry of the integrated cavity receiver was optimized according to two independent parameters and two possible optimum designs were finally revealed. The optimization took place regarding the optical performance of the collector with the cavity receiver. The simulation results indicated that the cavity design leads to enhancements of up to 4.40% and 4.00% in the optical and thermal efficiency respectively, while the minimum possible enhancement was above 2.20%. The mean enhancements in optical and thermal performance were found to be 2.90% and 2.92% respectively. Moreover, an analytical solution was developed for verifying the numerical results and the maximum deviations were found to be less than 5% in all the compared parameters. Especially, in thermal efficiency verification, the maximum deviation took a value of less than 0.5%. The design and the simulations in the present study were conducted with the SolidWorks Flow Simulation tool. [ABSTRACT FROM AUTHOR]

The objective of this work was to optimize and to evaluate a solar-driven trigeneration system which operates with nanofluid-based parabolic trough collectors. The trigeneration system includes an organic Rankine cycle (ORC) and an absorption heat pump operating with LiBr-H2O which is powered by the rejected heat of the ORC. Toluene, n-octane, Octamethyltrisiloxane (MDM) and cyclohexane are the examined working fluids in the ORC. The use of CuO and Al2O3 nanoparticles in the Syltherm 800 (base fluid) is investigated in the solar field loop. The analysis is performed with Engineering Equation Solver (EES) under steady state conditions in order to give the emphasis in the exergetic optimization of the system. Except for the different working fluid investigation, the system is optimized by examining three basic operating parameters in all the cases. The pressure in the turbine inlet, the temperature in the ORC condenser and the nanofluid concentration are the optimization variables. According to the final results, the combination of toluene in the ORC with the CuO nanofluid is the optimum choice. The global maximum exergetic efficiency is 24.66% with pressure ratio is equal to 0.7605, heat rejection temperature 113.7 °C and CuO concentration 4.35%. [ABSTRACT FROM AUTHOR]

The objective of the present study is the parametric investigation of a ground source heat pump for space heating purposes with boreholes. The working fluid in the heat pump is CO2, and the geothermal field includes boreholes with vertical heat exchangers (U-tube). This study is conducted with a developed model in Engineering Equation Solver which is validated with data from the literature. Ten different parameters are investigated and more specifically five parameters about the heat pump cycle and five parameters for the geothermal unit. The heat pump's examined parameters are the high pressure, the heat exchanger effectiveness, the temperature level in the heater outlet, the flow rate of the geothermal fluid in the evaporator and the heat exchanger thermal transmittance in the evaporator. The other examined parameters about the geothermal unit are the ground mean temperature, the grout thermal conductivity, the inner diameter of the U-tube, the number of the boreholes and the length of every borehole. In the nominal design, it is found that the system's coefficient of performance is 4.175, the heating production is 10 kW, the electricity consumption is 2.625 kW, and the heat input from the geothermal field is 10.23 kW. The overall resistance of the borehole per length is 0.08211 mK/W, while there are 4 boreholes with borehole length at 50 m. The parametric analysis shows the influence of the ten examined parameters on the system's performance and on the geothermal system characteristics. This work can be used as a reference study for the design and the investigation of future geothermal-driven CO2 heat pumps. [ABSTRACT FROM AUTHOR]

The utilization of solar irradiation in the building sector is vital to create sustainable systems. Trigeneration systems are highly efficient systems that usually produce electricity, heating and cooling which are the main energy needs in the buildings. The objective of this work is the energetic and financial investigation of three different solar-driven trigeneration systems that can be applied in buildings with high energy needs (e.g., hospitals or commercial buildings). The parabolic trough solar collector (PTC) is selected to be used because it is the most mature solar concentrating technology. The examined configurations practically are different combinations of organic Rankine cycle (ORC) with heat pumps. System 1 includes a PTC coupled to an ORC which feeds an absorption heat pump machine. System 2 includes a PTC which simultaneously feeds an ORC and absorption machine. System 3 includes a PTC which feeds an ORC and a heat exchanger for heating, while the ORC is fed with and electricity a vapor compression cycle for cooling production. The simple payback period of System 1 is 5.62 years and it is the lowest, with System 2 to have 7.82 years and System 3 to have 8.49 years. The energy efficiency of the three systems is 78.17%, 43.30% and 37.45%, respectively, while the exergy efficiency 15.94%, 13.08% and 12.25%, respectively. System 1 is the best configuration according to energy, exergy and financial analysis. This study is performed with developed thermodynamic models in Engineering Equation Solver and a dynamic model in FORTRAN. [ABSTRACT FROM AUTHOR]

This article presents a simulation study which focuses on the thermodynamic analysis of a solar-driven trigeneration system for heating, cooling, and electricity production. The system uses parabolic trough collectors operating with Therminol VP-1 for feeding an organic Rankine cycle operating with toluene and an absorption heat pump operating with a LiBr–H2O working pair. The collecting area is selected at 100 m2 and the storage tank at 4 m3. The system is studied parametrically in order to examine the impact of various parameters on the system energy efficiency, system exergy efficiency, electricity production, heating production, and cooling production in the simple payback period of the investment. The examined parameters are the following: solar beam irradiation level, solar beam irradiation angle, superheating degree in the turbine inlet, pressure level in the turbine inlet, heat source temperature level, generator temperature level, and the heat input in the generator. For the nominal case of a 15 kW generator input, the electricity production is 6.3 kW, the heating production 11.5 kW, and the cooling production 10.7 kW. The system energy efficiency is 40.7%, while the system exergy efficiency is 12.7%. The financial investigation of the investment proved that it is viable with the simple payback period to be 8.1 years in the nominal case and it can be reduced to 7.8 years with an optimization procedure. Lastly, it has to be said that the examined system is found to be a viable configuration which is an ideal choice for application in the building sector. The analysis was conducted under steady-state conditions with a model developed using Engineering Equation Solver (EES). [ABSTRACT FROM AUTHOR]

In this study, a small dish concentrator with a cylindrical cavity receiver was experimentally investigated as the heat source of a dryer. The system was examined for operation with pure thermal oil and Al2O3/oil nanofluid as the working fluids in the solar system. Moreover, the design, the development, and the evaluation of the dried mint plant are presented in this work. Also, the solar dryer system was simulated by the SolidWorks and ANSYS CFX software. On the other side, the color histogram of the wet and dried mint samples based on the RGB method was considered. The results revealed that the different temperatures of the solar working fluids at the inlet and outlet of the cavity receiver showed similar trend data compared to the variation of the solar radiation during the experimental test. Moreover, it is found that the cavity heat gain and thermal efficiency of the solar system was improved by using the nanofluid as the solar working fluid. Furthermore, the required time for mint drying had decreased by increasing the drying temperature and increasing air speed. The highest drying time was measured equal to 320 min for the condition of the air speed equal to 0.5 m/s and the drying temperature of 30 °C. A good agreement was observed between the calculated numerical results and measured experimental data. Finally, based on the color histogram of the wet and dried mint samples, it was concluded that intensity amount of the red color of the mint increased with the drying process compared to intensity amount of the red color of the wet mint sample. [ABSTRACT FROM AUTHOR]

The thermal enhancement of parabolic trough collectors is a critical issue and numerous ideas have been applied in the literature on this domain. The objective of this paper is to investigate some usual thermal enhancement techniques for improving the performance of evacuated and non-evacuated receivers of parabolic trough solar collectors. More specifically, the use of twisted tape inserts, perforated plate inserts, and internally finned absorbers are compared with the reference case of the smooth absorber. The analysis is conducted with a developed and validated thermal model in Engineering Equation Solver. The collector is investigated for a typical flow rate of 100 L/min and for inlet temperatures between 50 °C and 350 °C with Syltherm 800 as working fluid. According to the final results, the use of internally finned absorber leads to the highest thermal efficiency enhancement, which is up to 2.1% for the non-evacuated collector and up to 1.6% for the evacuated tube collector. The perforated plate inserts and the twisted tape inserts were found to lead to lower enhancements, which are up to 1.8% and 1.5%, respectively, for the non-evacuated collector, while they are up to 1.4% and 1.2%, respectively, for the evacuated collector. Moreover, the pressure drop increase with the use of the thermal enhancement methods is investigated and the use of internally finned absorber is found again to be the superior technique with the performance evaluation criterion to be ranged from 1.5 to 1.8 for this case. [ABSTRACT FROM AUTHOR]