Search

Electric vehicles in a short time will make up the majority of the fleet of vehicles used in general. This state of affairs will generate huge sets of data, which can be further investigated. The paper presents a methodology for the analysis of electric vehicle data, with particular emphasis on the energy consumption parameter. The prepared database contains data for 123 electric vehicles for analysis. Data analysis was carried out in a Python environment with the use of the dabl API library. Presentation of the results was made on the basis of data classification for continuous and categorical features vs. target parameters. Additionally, a heatmap Pearson correlation coefficient was performed to correlate the energy consumption parameter with the other parameters studied. Through the data classification for the studied dataset, it can be concluded that there is no correlation against energy consumption for the parameter charging speed; in contrast, for the parameters range and maximum velocity, a positive correlation can be observed. The negative correlation with the parameter energy consumption is for the parameter acceleration to 100 km/h. The methodology presented to assess data from electric vehicles can be scalable for another dataset to prepare data for creating machine learning models, for example. [ABSTRACT FROM AUTHOR]

Road transport contributes to almost a quarter of carbon dioxide emissions in the EU. To analyze the exhaust emissions generated by vehicle flows, it is necessary to use specialized emission models, because it is infeasible to equip all vehicles on the road in the tested road sections with the Portable Emission Measurement System (PEMS). However, the currently used emission models may be inadequate to the investigated vehicle structure or may not be accurate due to the used macroscale. This state of affairs is especially related to full hybrid vehicles, since there are none of the microscale emission models that give estimated emissions values exclusively for this kind of drive system. Several automakers over the past decade have invested in hybrid vehicles with great opportunities to reduce costs through better design, learning, and economies of scale. In this work, the authors propose a methodology for creating a CO2 emission model, which takes relatively little computational time, and the models created give viable results for full hybrid vehicles. The creation of an emission model is based on the review of the accuracy results of methods, such as linear, robust regression, fine, medium, coarse tree, linear, cubic support vector machine (SVM), bagged trees, Gaussian process regression (GPR), and neural network (NNET). Particularly in the work, the best fit for the road input data for the CO2 emission model creation was the GPR method. PEMS data was used, as well as model training data and model validation. The model resulting from this methodology can be used for the analysis of emissions from simulation tests, or they can be used for input parameters for speed, acceleration, and road gradient. [ABSTRACT FROM AUTHOR]

Among the solutions that make it possible to reduce CO2 emissions in the transport sector, particularly in urban traffic conditions, are hybrid vehicles. The share of driving performed in electric mode for hybrid vehicles is highly dependent on motion resistance. There are different methods for determining the motion resistance function during chassis dynamometer testing, leading to different test results. Therefore, the main objective of this study was to determine the effect of the chassis dynamometer load function on the energy demand and CO2 emissions of a full-hybrid passenger car. Emissions tests according to the New European Driving Cycle (NEDC) were carried out on a chassis dynamometer for three different methods of determining the car's resistance to motion. The study showed that adopting the motion resistance function according to different methods, results in differences in CO2 emissions up to about 35% for the entire cycle. Therefore, the authors suggest that in the case of tests carried out with chassis dynamometers, it is necessary to also provide information on the chassis dynamometer loading function adopted for the tests. [ABSTRACT FROM AUTHOR]

As in other countries of the world, the Turkish government is implementing many preventive partial and total lockdown practices against the virus's infectious effect. When the first virus case has been detected, the public authorities have taken some restriction to reduce people and traffic mobility, which has also turned into some positive affect in air quality. To this end, the paper aims to examine how this pandemic affects traffic mobility and air quality in Istanbul. The pandemic does not only have a human health impact. This study also investigates the social and environmental effects. In our analysis, we observe, visualize, compare and discuss the impact of the post- and pre-lockdown on Istanbul's traffic mobility and air quality. To do so, a geographic information system (GIS)-based approach is proposed. Various spatial analyses are performed in GIS with the statistical data used; thus, the environmental effects of the pandemic can be better observed. We test the hypothesis that this has reduced traffic mobility and improved air quality using traffic density cluster set and air monitoring stations (five air pollutant parameters) data for five months. The results shows that there are positive changes in terms of both traffic mobility and air quality, especially in April–May. PM10, SO2, CO, NO2 and NOx parameter values improved by 21.21%, 16.55%, 18.82%, 28.62% and 39.99%, respectively. In addition, there was a 7% increase in the average traffic speed. In order for the changes to be permanent, it is recommended to integrate e-mobility and sharing systems into the current transportation network. [ABSTRACT FROM AUTHOR]

The development of urban strategies for the reduction of environmental impacts and decarbonization requires ongoing monitoring from the local scale and further deployment of actions to improve transport demand (user characteristics and modal choice) and supply (infrastructure and services). The analysis of pollution sources and the evaluation of possible scenarios are preliminary to the mitigation of impacts. In particular, the study of geometrical and functional characteristics of infrastructures through micro-simulation allows understanding of which schemes can support the reduction of emissions and guarantee high levels of service (LOS), reducing the problem of vehicular congestion in urban areas. The present work focuses on the small-scale analysis of vehicular traffic emissions at a multi-lane roundabout road intersection and the comparison of geometric schemes (current and design) and use with a turbo roundabout scheme as traffic volumes changes. These volumes have plummeted due to the current COVID-19 pandemic. The results show that the geometric-functional modification of the roundabout intersection from a multi-lane to a turbo-roundabout intersection allows a reduction of up to 30% of the emissions considering the current composition of the traffic fleet in the city of Rzeszow in Poland. The proposed comparative analysis methodology can contribute to the drafting of sustainable urban mobility plans (SUMPs) proposing a set of investments for new road works and considering a number of scenarios with interventions that can be implemented in the medium and long term that can provide the incentive to reduce road congestion and vehicular emissions. [ABSTRACT FROM AUTHOR]

One of the solutions to reduce environmental emissions is related to the deployment of electric vehicles (EVs) with sustainable energy. In order to be able to increase the number of electric vehicles in circulation, it is important to implement optimal planning and design of the infrastructure, with particular reference to areas equipped with charging stations. The suitable analysis of the location of current electric vehicle charging stations (EVCSs) is the central theme of this document. The research focused on the actual location of the charging stations of five major EVCS companies in the province by selecting Istanbul as the study area. The study was conducted through a three-step approach and specifically (i) the application of the analytical hierarchy process (AHP) method for creating the weights of the 6 main and 18 secondary criteria that influence the location of EVCSs; (ii) a geospatial analysis using GIS considering each criterion and developing the suitability map for the locations of EVCSs, and (iii) application of the technique for order preference by similarity to ideal solution (TOPSIS) to evaluate the location performance of current EVCSs. The results show that the ratio between the most suitable and unsuitable areas for the location of EVCSs in Istanbul and the study area is about 5% and 4%, respectively. The results achieved means of improving sustainable urban planning and laying the basis for an assessment of other areas where EVCSs could be placed. [ABSTRACT FROM AUTHOR]

Urban agglomerations close to road infrastructure are particularly exposed to harmful exhaust emissions from motor vehicles and this problem is exacerbated at road intersections. Roundabouts are one of the most popular intersection designs in recent years, making traffic flow smoother and safer, but especially at peak times they are subject to numerous stop-and-go operations by vehicles, which increase the dispersion of emissions with high particulate matter rates. The study focused on a specific area of the city of Rzeszow in Poland. This country is characterized by the current composition of vehicle fleets connected to combustion engine vehicles. The measurement of the concentration of particulate matter (PM2.5 and PM10) by means of a preliminary survey campaign in the vicinity of the intersection made it possible to assess the impact of vehicle traffic on the dispersion of pollutants in the air. The present report presents some strategies to be implemented in the examined area considering a comparison of current and project scenarios characterized both by a modification of the road geometry (through the introduction of a turbo roundabout) and the composition of the vehicular flow with the forthcoming diffusion of electric vehicles. The study presents an exemplified methodology for comparing scenarios aimed at optimizing strategic choices for the local administration and also shows the benefits of an increased electric fleet. By processing the data with specific tools and comparing the scenarios, it was found that a conversion of 25% of the motor vehicles to electric vehicles in the current fleet has reduced the concentration of PM10 by about 30% along the ring road, has led to a significant reduction in the length of particulate concentration of the motorway, and it has also led to a significant reduction in the length of the particulate concentration for the access roads to the intersection. [ABSTRACT FROM AUTHOR]