Search

In recent years, integration of solar photovoltaic (PV) systems into distribution networks has been increasing rapidly, as it has become the most promising renewable energy source (RES) in the transition of power generation from centralised to decentralised systems. With the power electronic (PE) interfaces that use high-frequency internal switching, all renewable energy sources are considered to be harmonic emitters, especially near switching frequencies, i.e., above 2 kHz. This paper evaluates the behaviour of high-frequency harmonics in the 2–20 kHz range due to the parallel operation of multiple solar PV inverters connected to a low-voltage (LV) network. The circulation current component that flows within the installation due to the low impedance paths at higher frequencies is analysed. Summation of high-frequency harmonic currents is observed with phase diversity analysis. The circulating current component can become 14 times higher than the grid current component at higher frequencies. [ABSTRACT FROM AUTHOR]

It is widely recognised that improving the visibility and controllability of distributed energy resources (DERs) within electricity distribution networks will have significant benefits, particularly for the management of low-voltage (LV) and medium-voltage (MV) networks. Much work within the electricity distribution industry is currently focused on improving the visibility of DERs on LV networks. From a control-theoretic perspective, this enables closing the loop between the DER and the control room and enables a shift towards utilising data-driven model-based control strategies for DERs. The result is a system-wide performance that is closer to the theoretical optimal. In the Australian context, several jurisdictions are trialling techniques such as dynamic operating envelopes to enhance DER hosting capacity, using IEEE 2030.5-based architectures, with the implementation of distributed energy resource management (DERMS) systems at the enterprise level still quite limited. While there is significant activity focused on DER behaviour and control techniques by way of inverter grid codes and standards, the core issue of interoperability with distribution management systems (DMSs), market operators or participants, electric vehicles (EVs) or other DERs is still a work in progress. Importantly, this is also an impediment to realising distributed architectures for DER control in the grid. The unique characteristics of Australian distribution networks highlights several challenging problems for DER control and management. The objective of this paper is to provide a broad overview of DER control and management strategies in the Australian context, with an application focus on DER control in distribution network management. [ABSTRACT FROM AUTHOR]

Large-scale renewable energy plants, flexible AC (alternating current) and high voltage DC (direct current) transmission systems, and modern consumer devices utilize power electronics that tend to increase harmonic emissions. Furthermore, such emissions are nowadays known to exceed the traditional 2 kHz range typically considered for harmonic analysis. However, the accuracy of such harmonic measurements in medium and high voltage networks is questionable due to the lack of accuracy specifications for the respective instrument transformers that are being used in the measurement chain. Therefore, the motivation of this study is to review the existing techniques for measuring high-frequency voltage harmonics, i.e., those in the range 2–9 kHz, in medium-, high-, and extra high-voltage electricity networks, where most large-scale power electronic converters are being connected. Different transducer types are compared in terms of measurement accuracy. The reviewed literature indicates that some transducers can introduce errors due to their nonlinearities. The study also identifies the limitations of calibrating these transducers at frequencies above 2 kHz due to the unavailability of suitable sources capable of generating the required test waveforms. Furthermore, the study emphasizes the necessity for establishing accuracy limits for harmonic measurements above 2 kHz. [ABSTRACT FROM AUTHOR]

Low voltage devices connected to public electricity supply networks can be subjected to a wide range of voltage quality, including sustained overvoltage. Assessing the impact of sustained overvoltage on devices connected to the distribution network is important in determining the appropriate variance of standard voltage levels without unduly impacting the utility and customers from a technical and economic perspective. Therefore, a clear understanding of the impact that sustained overvoltage has on the lifetime of the connected equipment is a necessary task. This paper investigates the impact of sustained overvoltage through a series of accelerated-life testing experiments on a custom designed test device representative of a common interface between the power supply and distribution network, a switch mode power supply. The switch mode power supply with combined rectifier and filtering capacitor represents one of the most common front ends of LV equipment in modern appliances, and the work here concentrates on the impact of overvoltage on capacitor ageing. The results of the testing indicate that there is an accelerated ageing impact correlated with the applied voltage magnitude. Furthermore, analysis shows that mismatches between appliance voltage rating and sustained network voltage, leading to accelerated ageing, may result in premature device failure without the consumer being aware of the root cause. [ABSTRACT FROM AUTHOR]