Search

The water inrush from karst collapse column (KCC) is a cascading, vicious cycle disaster caused by geological and mining activities, that can cause serious casualties and property losses. The key to preventing this risk is to study the mechanism of water inrush under confining pressure. Aiming at the investigationg the characteristics of the KCC named X1 in Chensilou mine, a series of methods, including connectivity experiments, water pressure monitoring tests in two side-walls, and numerical simulations based on plastic damage-seepage (PD-S) theory have been developed. The methods are used to test the security of the 2519 mining area, the damage thickness, pore water pressure, and seepage vector in the X1. The results indicate that the X1 has a certain water blocking capacity. In addition, with the decrease of confining pressure and increase of shear stress, deviatoric stress could cause the increase of permeability, the reduction of strength, and the reduction of pore water pressure in KCC. Therefore the increased effective stress in the rock will force the rock to become more fractured. Conversely, the broken rock could cause the change of stress, and further initiate new plastic strains, damage and pore water pressure until a new equilibrium is reached. This cascading water inrush mechanism will contribute to the exploitation of deep coal resources in complex geological and hydrogeological conditions. [ABSTRACT FROM AUTHOR]

In order to better understand groundwater influx and protection in coal mining extraction works, an in-house water flow apparatus coupled with an industrial rock testing system, known as MTS 815.02, were used to study the effects of grain size mixtures on the compaction and flow properties of disintegrated, or non-cemented, coal samples. From the Reynolds number evaluation of the samples with different grain mixtures, and the relationship between the water flow velocity and pore pressure gradient differences, it was found that seepage through the mixtures are of non-Darcy flow type. The porosity of coal specimens was found to be highly affected by compaction, and the variations of the porosity were also influenced by the samples’ grain size distribution. It was found that the sample porosity decreases with increasing compaction and decreasing grain sizes. Grain crushing during compaction was observed to be the main cause of the appearance of fine grains, and the washing away of fine grains was consequently the main contributing factor for the weight loss due to water seepage. It was observed that during the tests and with the progression of compaction, permeability k decreases and non-Darcy factor β increases with decreasing porosity φ. The k-φ and β-φ plots show that as the sizes of disintegrated coal samples are getting smaller, there are more fluctuations between the porosity values with their corresponding values of k and β. The permeability value of the sample with smallest grains was observed to be considerably lower than that of the sample with largest grains. Non-Darcy behavior could reduce the hydraulic conductivity. It was found that the porosity, grain breakage and hydraulic properties of coal samples are related to grain sizes and compaction levels, as well as to the arrangement of the grains. At high compaction levels, the porosity of disintegrated coal samples decreased strongly, resulting in a significant decrease of the permeability at its full compression state; Non-Darcy flow behavior has the slightest effect in uniform samples, therefore, indicating that disintegrated coal in uniform grain size mixtures could be treated as an aquicluding (water-resisting) stratum. [ABSTRACT FROM AUTHOR]