Search

Road lighting uniformity is an essential lighting quality parameter for motorists and pedestrians and varies with lighting design parameters. Increased road lighting uniformity may result in benefits, such as increased reassurance and perceived safety for pedestrians or an increased overall visual perception. However, no previous study has investigated how road lighting uniformity varies with lighting design scenarios or how the uniformity of various lighting design scenarios affects other essential parameters, such as energy performance and obtrusive light. This study aimed to investigate: (I) how uniformity varies with different road lighting design scenarios, and (II) how uniformity correlates with energy performance and risk for increasing spill light. The study is limited to pedestrian roads. We performed photometric calculations in ReluxDesktop for more than 1.5 million cases with single-sided pole arrangements and for various geometries of road width, pole distance, pole height, overhang, and luminaire tilt. The results were analyzed with a set of five relevant metrics that were calculated and analyzed together with uniformity. For the evaluation, we used the minimum luminaire power needed to achieve an average illuminance of 10 lx, the power density indicator (DP), edge illuminance ratio (REI), and we introduced two new indicators for spill light on the ground in the border areas: the extended edge illuminance ratio (extended REI) and the spill flux ratio (RSF). The results show that increased uniformity levels may significantly increase energy consumption and spill light, but that both these impacts can be relatively controlled if uniformity is kept under certain limits. The investigated cases also demonstrated that improper lighting planning significantly increases adverse effects, such as spill light. [ABSTRACT FROM AUTHOR]

Lighting uniformity is a key factor in traffic safety, and it could even result in energy savings for light installations. However, highly uniform horizontal road lighting for motorized vehicles may not be optimal for pedestrian roads. Therefore, it is important to evaluate the way in which pedestrians experience road lighting uniformity. Accordingly, we employed a qualitative approach to examine pedestrian road lighting uniformity. Visual analyses were used to exemplify and discuss the perceived uniformity. The case studies were performed on three pedestrian roads with similar light installations. The results show that the experience of road lighting uniformity differs substantially between the three roads. Based on the case studies, there are many aspects that need to be considered beyond the light falling on the horizontal surfaces. This study suggests that the visual experience of road lighting uniformity for pedestrians is difficult to estimate with photometric values because the visual impact of uniformity is highly influenced by the spatial context and landscape. [ABSTRACT FROM AUTHOR]

Phototactic and polarotactic aquatic insects, such as mayflies, can be drawn to electric lighting on bridges at night. Past research investigating the effect of light intensity, polarization, and spectrum on mayflies suggests that a combination of different techniques can reduce the number of mayflies attracted to bridges. Here, various lighting strategies are systematically tested on Veterans Memorial Bridge in Pennsylvania to investigate the effect of lighting on mayflies and address safety concerns caused by their mass crowding. Isolated trials on different parts of the bridge tested the effectiveness of correlated color temperature, chromaticity, ultraviolet radiation, shielding, and polarization. Results indicate that mayflies were more attracted to ultraviolet radiation, blue and green light, and polarized light than other lighting conditions. Shielding was minimally effective in reducing the number of mayflies on the bridge when supported by the change in light source spectrum. While the correlated color temperature did not result in a statistically significant impact, the spectral power distribution of the light sources was a major influencer for mayfly activity. Future research should investigate the effect of radiant intensity and timing on mayfly activity. Smart solid-state lighting systems and controls can also be used to adjust the light levels when needed to reduce adverse effects on aquatic insects and aid traffic safety. [ABSTRACT FROM AUTHOR]

The paper presents the opportunities to apply computer graphics in an object floodlighting design process and in an analysis of object illumination. The course of object floodlighting design has been defined based on a virtual three-dimensional geometric model. The problems related to carrying out the analysis of lighting, calculating the average illuminance, luminance levels and determining the illuminated object surface area are also described. These parameters are directly tied with the calculations of the Floodlighting Utilisation Factor, and therefore, with the energy efficiency of the design as well as the aspects of light pollution of the natural environment. The paper shows how high an impact of the geometric model of the object has on the accuracy of photometric calculations. Very often the model contains the components that should not be taken into account in the photometric calculations. The research on what influence the purity of the geometric mesh of the illuminated object has on the obtained results is presented. It shows that the errors can be significant, but it is possible to optimise the 3D object model appropriately in order to receive the precise results. For the example object presented in this paper, removing the planes that do not constitute its external surface has caused a two-fold increase in the average illuminance and average luminance. This is dangerous because a designer who wants to achieve a specific average luminance level in their design without optimizing the model will obtain the luminance values that will actually be much higher. [ABSTRACT FROM AUTHOR]

The aim of this review was to map synergies and trade-offs between sustainable development and energy efficiency and savings regarding exterior lighting. Exterior lighting, such as public road and street lighting, requires significant amounts of energy and hinders sustainable development through its increasing of light pollution, ecological impact, and global climate change. Interlinkages between indicators in sustainability and energy that have positive interactions will lead to a mutual reinforcement in the decision-making process, and vice versa, interlinkages between trade-offs may lead to unwanted and conflicting effects. Very few studies have presented a clear vision of how exterior lighting should be contributing to, and not counteracting, the sustainable development of our planet. This study was conducted through a theoretical and systematic analysis that examined the interactions between sustainable development and energy performance based on a framework using indicators and variables, and by reviewing the current literature. Additionally, 17 indicators of energy efficiency and energy savings were identified and used in the analysis. Most interactions between variables for sustainable development and energy performance (52%) were found to be synergistic. The synergistic interactions were mostly found (71%) in the ecological and environmental dimension showing that environmental and ecological sustainability goes hand in hand with energy efficiency and savings. Trade-offs were found only in the economic and social dimensions accounting for 18% of the interactions identified. This review shows that the interactions between sustainable development and energy performance can be used to establish more efficient policies for decision-making processes regarding exterior lighting. [ABSTRACT FROM AUTHOR]