Search

Many technological advancements in the modern era have made actual use of electrical power and the constrained operating of power systems within stability limits. Some expeditious load variations and rising power demands initiate complications in voltage stability and can put stress on performance, leading to voltage instability. Voltage Stability Indices can be used to perform voltage stability assessment. This review evaluates various VSIs based on mathematical derivations, assumptions, critical values, and methodology. VSIs determine the maximum loadability, voltage collapse proximity, stability margin, weak areas, and contingency ranking. Stability indices can also specify the optimal placing and sizing of Distributed Generators. Thus, VSIs play a vital role in power system voltage stability. This review is a comprehensive survey of various indices and analyses their accuracy in determining the instability of power systems. Voltage stability is a crucial concern in operating a reliable power system, and the systematic evaluation of voltage stability is essential in a power system. This review considered and analyzed 34 indices from 138 articles from the literature for their significant performance in various power system stability problems. Of 33 indices, were 22 derived from transmission line parameters, referred to as line indices, and 12 from bus and line parameters, referred to as bus indices. [ABSTRACT FROM AUTHOR]

An induction motor is generally used in industrial applications because it is reliable, robust, and low cost. Reliability is one of the essential parameters based on which the motor is selected, and the induction motor primarily comes into force. The well-founded induction motor gives good results under various operating states. To achieve this, the values of the motor are kept in mind. Dynamic simulation plays a significant part in evaluating the model's design process to eliminate design errors in typical construction types and when testing the motor drive system. The induction motor is modeled in a synchronously revolving rotor flux-oriented frame, which is used as a reference. For sensorless vector control and induction motor control methods, accurate knowledge of a few induction motor parameters is necessary. The presentation of the drive will degrade if the original data in the motor do not match the values utilized in the controller. Various mechanisms have been developed to calculate the online and offline parameters of the induction machine for its application in high-performance drives. The foremost grail of this review paper is to present dynamic modeling and other considerable approaches used for estimating the induction motor parameter. This paper also constitutes some simulation examples related to dynamic modeling and parameter estimation techniques, which may be useful for specialists in the field of electric drive control systems. [ABSTRACT FROM AUTHOR]

Recently, the concept of the microgrid (MG) has been developed to assist the penetration of large numbers of distributed energy resources (DERs) into distribution networks. However, the integration of DERs in the form of MGs disturbs the operating codes of traditional distribution networks. Consequently, traditional protection strategies cannot be applied to MG against short-circuit faults. This paper presents a novel intelligent protection strategy (NIPS) for MGs based on empirical wavelet transform (EWT) and long short-term memory (LSTM) networks. In the proposed NIPS, firstly, the three-phase current signals measured by protective relays are decomposed into empirical modes (EMs). Then, various statistical features are extracted from the obtained EMs. Afterwards, the extracted features along with the three-phase current measurement are input to three different LSTM network to obtain exact fault type, phase, and location information. Finally, a trip signal based on the obtained fault information is generated to disconnect the faulty portion from the rest of the MG. The significant feature of the proposed NIPS is that it does not need adaptive relaying and communication networks. Moreover, it is independent of the operating scenario and hence fault current magnitude. To evaluate the efficacy of the proposed NIPS, exhaustive simulations are performed on an international electro-technical commission (IEC) MG. The simulation results confirm the efficiency of the proposed NIPs in terms of accuracy, dependability, and security. Moreover, comparisons with existing intelligent protection schemes validate that the proposed NIPS is highly accurate, secure, and dependable. [ABSTRACT FROM AUTHOR]

The optimal allocation of protective devices is a serious issue in an electrical power system; in order to reduce the possibility of faults, the protection devices should be optimally placed. The paper presents a continuous genetic algorithm (CGA) for the optimal allocation of directional relays for the efficient energy minimization in a radial distribution system (DG). The algorithm is flexible to use for the changes and improvements in the optimal location for a DG unit and can optimize the energy consumption in the radial distribution system. The proposed algorithm has been implemented on IEEE 33 and 69-bus system using MATLAB (R2014b, MathWorks). Low energy consumption is a common design objective in an energy-constrained distribution system. Engineers, power utilities, and network operators can profit from the proposed methodology to enhance the use of DG in distribution networks. [ABSTRACT FROM AUTHOR]

The remarkable progress of power electronic converters (PEC) technology has led to their increased penetration in distributed energy systems (DES). Particularly, the direct current (dc) nanogrid-based DES embody a variety of sources and loads, connected through a central dc bus. Therefore, PECs are required to be employed as an interface. It would facilitate incorporation of the renewable energy sources and battery storage system into dc nanogrids. However, it is more challenging as the integration of multiple modules may cause instabilities in the overall system dynamics. Future dc nanogrids are envisioned to deploy ready-to-use commercial PEC, for which designers have no insight into their dynamic behavior. Furthermore, the high variability of the operating conditions constitute a new paradigm in dc nanogrids. It exacerbates the dynamic analysis using traditional techniques. Therefore, the current work proposes behavioral modeling to perform system level analysis of a dc nanogrid-based DES. It relies only on the data acquired via measurements performed at the input–output terminals only. To verify the accuracy of the model, large signal disturbances are applied. The matching of results for the switch model and its behavioral model verifies the effectiveness of the proposed model. [ABSTRACT FROM AUTHOR]

The relay coordination problem is of dire importance as it is critical to isolate the faulty portion in a timely way and thus ensure electrical network security and reliability. Meanwhile a relay protection optimization problem is highly constraint and complicated problem to be addressed. To fulfill this purpose, Harris Hawk Optimization (HHO) is adapted to solve the optimization problem for Directional Over-current Relays (DOCRs) and numerical relays. As it is inspired by the intelligent and collegial chasing and preying behavior of hawks for capturing the prey, it shows quite an impressive result for finding the global optimum values. Two decision variables; Time Dial Settings (TDS) and Plug Settings (PS) are chosen as the decision variables for minimization of overall operating time of relays. The proposed algorithm is implemented on three IEEE test systems. In comparison to other state-of-the-art nature inspired and traditional algorithms, the results demonstrate the superiority of HHO. [ABSTRACT FROM AUTHOR]

Renewable energy resources like solar energy, wind energy, hydro energy, photovoltaic etc. are gaining much importance due to the day by day depletion of conventional resources. Owing to the lower efficiencies of renewable energy resources, much attention has been paid to improving them. The concept of utilizing phase change materials (PCMs) has attracted wide attention in recent years. This is due to their ability to extract thermal energy when used in collaboration with photovoltaic (PV), thus improving the photoelectric conversion efficiency. In this paper, the objective is to design and fabricate a novel thermal energy storage system using phase change material. An investigation on the characteristics of Potash Alum as a phase change material due to its low cost, easy availability and its usage as an energy storage for the indoor purposes are taken into account. The use of a latent heat storage system using phase change materials (PCMs) is an effective way of storing thermal energy and has the advantage of high-energy storage density and the isothermal nature of the storage process. In the current study, potash alum was identified as a phase change material combined with renewable energy sources, that can be efficiently and effectively used in storing thermal energy at compartively lower temperatures that can later be used in daily life heating requirements.A parabolic dish which acts of a heat collector is used to track and reflects solar radiation at a single point on a receiver tank. Heat transfer from the solar collector to the storage tank is done by using a circulating heat transfer fluid with the help of a pump. The experimental results show that this system is capable of successfully storing and utilizing thermal energy on indoor scale such as cooking, heating and those applications where temperature is below 92 °C. [ABSTRACT FROM AUTHOR]

In power systems protection, the optimal coordination of directional overcurrent relays (DOCRs) is of paramount importance. The coordination of DOCRs in a multi-loop power system is formulated as an optimization problem. The main objective of this paper is to develop the whale optimization algorithm (WOA) for the optimal coordination of DOCRs and minimize the sum of the operating times of all primary relays. The WOA is inspired by the bubble-net hunting strategy of humpback whales which leads toward global minima. The proposed algorithm has been applied to six IEEE test systems including the IEEE three-bus, eight-bus, nine-bus, 14-bus, 15-bus, and 30-bus test systems. Furthermore, the results obtained using the proposed WOA are compared with those obtained by other up-to-date algorithms. The obtained results show the effectiveness of the proposed WOA to minimize the relay operating time for the optimal coordination of DOCRs. [ABSTRACT FROM AUTHOR]