Search

In renewable energy based systems Grid-Connected Voltage Source Converters (GC-VSC) are used in many applications as grid-feeding converters, which transfer the power coming from the renewable energy sources to the grid. In some cases, the operation of GC-VSC may become unstable or uncontrollable due to, among others: a grid fault or an inappropriate current-power reference, that give rise to fast electrical transients or a saturation of the controller. In this paper, an improved control scheme is proposed to enhance the controllability of GC-VSC in all these situations. This solution consists of two parts, on the one hand a new Proportional-Resonant (PR) controller with anti-windup capability to be used as current controller, and secondly a new current/power reference modifier, which defines the suitable reactive current/power reference to keep the system stable. It is worth to mention that the proposed scheme does not need information about the grid parameters as it only uses the converter current, and the voltage at the capacitors of Inductor-Capacitor (LC) output filter. [ABSTRACT FROM AUTHOR]

Three-level converters have drawn extensive attention due to their ability to deliver high-quality power. High semiconductor count is the main drawback of three-level converters. As a solution to this, a 10-switch converter is presented, that has advantages over both two- and three-level converters, simultaneously, plus it is applicable to a variety of power ranges. However, the switching pattern of 10-switch converter is not as simple as standard three-level converter due to lack of medium vectors. This paper presents a novel space vector modulation (SVM) for a 10-switch converter to reduce total harmonic distortion (THD) and common mode voltage (CMV) of this converter in comparison to prior carrier-based modulation methods. A simplified, low-cost modulation algorithm for the converter is proposed. The designed switching sequence has aimed at a low output THD and enhancement of DC bus voltage utilization. The performance of the proposed SVM is then compared to upgraded sinusoidal PWM. AC power quality and CMV of a 10-switch converter based on two modulation methods are investigated via simulation models. It was validated via simulation and experimental models that the proposed SVM utilized DC bus voltage more efficiently, generated remarkably less THD compared to other methods, and had a lower peak and rms CMV. [ABSTRACT FROM AUTHOR]

Employing partial power processing (PPP) technique for quasi Z-source converter (QZSC) a new structure of the converter is presented. Using PPP technique although eliminates electrical insolation, but permits reducing voltage and current stress at the semiconductors, if compared with full power proposals. In this work, two PPP structures are discussed: A first one, similar to the basic topology, where the output voltage of the power converter is in series with the input voltage; and a second one, where the output is in series with the capacitor of the QZSC. This minor modification, which requires no extra elements, improves the power rating, voltage gain, and requires a lower transformation ratio. An experimental prototype of the proposed converter has been tested and the results are compared with other implementations, permitting to validate the theoretical analysis as well as the advantages that this proposal provides. [ABSTRACT FROM AUTHOR]