Search

In this study, the mixing power and the axial and radial velocity distributions were determined for the standard PBT45-6 impeller with inclined blades and for three NACA impellers with airfoil blades. On the basis of the velocity distributions obtained by means of PIV techniques, the pumping efficiency and the size of the secondary circulation for the tested impellers were determined. The next stage was to calculate the efficiency of the impeller operation, in which the comparative criteria were the values of the mixing energy in the form of a dimensional and dimensionless criterion. The lowest mixing energy was obtained for impellers with symmetrical profiled NACA0021 blades, which was 20% lower than the similar mixing energy obtained for the standard PBT45-6 impeller. [ABSTRACT FROM AUTHOR]

This paper presents an analysis of methods to increase the efficiency of heat transfer in heat exchangers. The scope of the research included analysis of efficiency optimization using the example of two tubular heat exchanger structures most often used in industry. The obtained efficiency of heat recovery from the ground of the examined exchangers was over 90%, enabling the reduction of emissions of the heating systems of buildings. The paper presents the results of tests of two types of heat pipes using R134A, R404A, and R407C working agents. The paper also presents the results of experimental tests using the R410A working medium. The results included in the study will also enable the effective use of land as a heat store. [ABSTRACT FROM AUTHOR]