Search

After more than 10 years of exploration, development, research, and practical efforts, China has opened up new perspectives for the commercial exploitation of marine shale gas. While high shale gas production is a main driver for energy security and economic development in China, there have been few attempts to systemically scientific analysis the challenges, prospect, development strategies, and goals for shale gas. Here, we present a detailed comparison of the differences in shale gas between the Sichuan Basin and North America from multiple dimensions, explain how and to what extent recent advances have been made, discuss the current challenges, and provide strategies to deal with these challenges. We demonstrate that a total of 13 graptolite zones developed in the Wufeng–Longmaxi Formations, achieved by representative cores from 32 coring wells and 7 outcrop profiles, can establish the chronostratigraphic framework in the Sichuan Basin, which leads to the potential impact of high-quality reservoir distribution and shale gas production. Shale gas is still faced with the challenges of complex underground and surface conditions, low single-well EUR, and immature deep development engineering technology. To circumvent these issues, here, we propose several strategies, including sweet-spot optimization, low-cost drilling techniques, and efficient fracturing technologies. Our results strengthen the importance of adopting fundamental theoretical research and practical and feasible development goals to realize more commercial discoveries of shale gas of diverse types and higher growth of shale gas reserves and production. [ABSTRACT FROM AUTHOR]

Strong overpressure conditions are widely distributed in the deep Longmaxi Formation (Fm) shale reservoirs in the Southern Sichuan Basin, with pressure coefficients ranging from 1.75 to 2.45. Overpressure plays a positive role in the high yield of shale gas, but a detailed study of its generation mechanism, evolution history, and potential impact on pore development is still lacking. This study's evidence from theoretical analysis and the logging response method indicates that hydrocarbon generation expansion is the main generation mechanism for strong overpressure. Through the combined analysis of basin modeling, inclusions analysis, and numerical simulation, pressure evolution at different stages is quantitatively characterized. The results show that, during the shale's long-term subsidence process, the shale reservoir's pressure coefficient increased to 1.40 because of oil generated by kerogen pyrolysis. Then it increased to 1.92 due to gas generated by residual oil cracking. During the late strong uplift process of the shale, temperature decrease, gas escape, and stratum denudation caused the pressure coefficient to first decrease to 1.84 and then increased to 2.04. Comparing pore characteristics under different pressure coefficients indicates that higher pressure coefficients within shale reservoirs contribute to the maintenance of total porosity and the development of organic macropores, but the influence on the morphology of organic pores is negligible. These results will provide the scientific basis for optimizing sweet spots and guiding shale gas exploration in the study area. [ABSTRACT FROM AUTHOR]

At the Changning block and at the Luzhou block, the genetic mechanism of low-resistivity shale and its impact on reservoir quality are currently a hot topic on a world-wide scale. Shale with resistivity lower than 20 Ω·m is widely developed at the Wufeng-Longmaxi Formation in the Southern Sichuan Basin, bringing a considerable challenge for reservoir prediction using the electromagnetic method. This paper discusses the genetic mechanisms and reservoir qualities of three low-resistivity shale reservoir types in the Southern Sichuan Basin (the Changning block and Luzhou block). Three primary elements controlling low-resistivity shale distribution in the Southern Sichuan Basin have been deduced: widely distributed gravity flow deposits, poor structural preservation conditions and shale graphitization caused by Emeishan basalt. Specifically, (1) the shale reservoir with a resistivity <12 Ω·m was uniformly distributed with gravity flow deposits in the Southern Sichuan Basin. High clay mineral contents (especially illite) in gravity flow deposits increased cation exchange capacity and irreducible water saturation at shale reservoir, decreasing electrical resistivity. (2) The resistivity of the shale reservoir close to a complex fault-fracture zone was generally lower than 20 Ω·m, indicating that poor structural preservation conditions played an important role in the wide distribution of low-resistivity shale. The resistivity of the shale reservoir near NE-trending faults at the Changning block was significantly lower than that in other areas. (3) Emeishan basalt caused extensive shale graphitization at the west of the Changning block, which was limited at the Luzhou block. The shale resistivity at the Luzhou block was not affected by graphitization. Among three types of low-resistivity shale, type III was characterized by high quartz content, high TOC, high porosity, high gas content and low graphitization. Although the resistivity of type III is generally lower that 20 Ω·m, it is still a favorable exploration target in the Southern Sichuan Basin. [ABSTRACT FROM AUTHOR]

This paper documents depositional structures and their reservoir characteristics in the Wufeng–Longmaxi shale from outcrops and cores using thin sections, X-ray powder diffraction (XRD) analysis, carbon–sulfur analyzer, helium porosimeter, decay permeameter, and focused ion beam scanning electron microscope (FIB-SEM). In the study area, clayey and silty laminae abound in the shale. Clayey laminae are rich in bedding parallel fractures, microfractures, and organic pore networks. Silty laminae are rich in isolated inorganic pores and limited amounts of bedding non-parallel fractures. Various inter-lamination of clayey and silty laminae form five depositional structure types which are closely related to the ancient hydrodynamics, paleoredox condition, and sedimentation rate and have significant impacts on shale fractures, microfractures, pore types, pore-size distribution, and porosity. For the paper lamination (PL) and grading lamination composed of siltstone and claystone (GL-SC), organic pores account for 71.6% and 61.4% of the total, and dense bedding parallel and non-parallel fractures intersect to form connective networks. In the interlaminated lamination composed of siltstone and claystone (IL), grading lamination composed of claystone (GL-C) and structureless beds (SB), organic pores merely account for 20% to 51.8% of the total and minor isolated bedding parallel fractures occur. Among five depositional structure types, the PL and GL-SC have the highest porosity, permeability, TOC content, siliceous content, organic pore proportions, and ratios of horizontal to vertical permeability, which help them become shale gas exploration and development targets. [ABSTRACT FROM AUTHOR]