Search

Due to their significant performance, Phase-Shifted Full-Bridge Converters (PSFBCs) have gained widespread adoption in medium- and high-power applications. The performance of a PSFBC is greatly influenced by its magnetic components, namely the transformer and resonance inductor. To address these challenges, this paper proposes a parameter optimization of magnetic components for PSFBCs, specifically the transformer turns ratio and resonance inductor value, to enhance conversion efficiency and minimize operational loss. A digital twin of PSFBCs enabling a more accurate loss estimation is proposed to achieve this objective. The proposed loss estimation method precisely calculates the effective and circulation intervals and the corresponding current points of the primary-side transformer current, resulting in improved accuracy. By leveraging the digital twin, the effects of transformer turns ratio and resonant inductor value on the conversion efficiency of a PSFBC can be efficiently simulated. This facilitates the parameter optimization of magnetic components, thereby minimizing operational losses across different application scenarios. This paper also designs and implements a PSFBC prototype with a rated input voltage of 380 V, output voltage of 24 V, and output current of 20 A. The experimental results show the influences of transformer turns ratio and resonant inductor value on the PSFBC and validate the proposed digital twin. The proposed parameter optimization of magnetic components is further evaluated across two application scenarios with varying utilization rates. The simulation results indicate a reduction of approximately 14% in operational loss per hour after applying the parameter optimization of magnetic components for the PSFBC used as a battery charger. The results demonstrate the effectiveness and practicality of the proposed digital twin in designing PSFBCs. [ABSTRACT FROM AUTHOR]

There will be an increasing number of retired batteries in the foreseeable future. Retired batteries can reduce pollution and be used to construct a battery cycle ecosystem. To use retired batteries more efficiently, it is critical to be able to determine their State of Health (SOH) precisely and speedily. SOH can be estimated accurately through a comprehensive and inefficient charge-and-discharge procedure. However, the comprehensive charge and discharge is a time-consuming process and will make the SOH assessment for many retired batteries unrealistic. This paper proposes an accurate and efficient SOH Estimation (SOH-E) method using the actual data of retired batteries. A battery data acquisition system is designed to acquire retired batteries' comprehensive discharge and charge data. The acquired discharge data are separated into various time interval-segregated sub-data. Then, the specially designed features for SOH-E are extracted from the sub-data. Neural Networks (NNs) are trained using these sub-data. The retired batteries' SOH levels are then estimated after the NNs' training. The experiments described herein use retired lead–acid batteries. The batteries' rated voltage and capacity are 12 V and 90 Ah, respectively. Different feature value extractions and time intervals that might affect the SOH-E accuracy and are tested. The Backpropagation NN (BPNN) and Long-Short-Term-Memory NN (LSTMNN) are designed to estimate SOH in this paper. The experimental results indicate that SOH can be calculated in 30 min. The Root-Mean-Square Errors (RMSEs) are less than 3%. The proposed SOH-E can help decrease pollution, extend the life cycle of a retired battery, and establish a battery cycle ecosystem. [ABSTRACT FROM AUTHOR]

Load survey has become a routine project for shipbuilding and shipping companies to investigate electrical load characteristics to enhance the power system planning and operation of marine vessels. In this brief perspective, we will outline a few steps to feeder losses analysis based on the result conducted by the load survey. The power flow and feeder loss analysis are extracted and used to determine the critical parameters that can significantly affect the system feeder losses used in the electrical load analysis in new ships. Exploring this new research direction will provide a more thorough understanding of feeder losses in marine vessel power systems. In this paper, a case study of container ship power loss analysis using the Newton–Raphson method is presented. The analysis results can provide shipbuilding corporations and ship owners with useful information for planning, designing, operating, and controlling shipboard power systems. As an energy-saving measure for ship microgrids, the frequency converters are widely used by shipyards for seawater and freshwater cooling systems and heating, ventilation, and air conditioning (HVAC) systems, so that these systems can adjust the speed of the motor according to the actual demand of the load, so as to avoid full-load operation during the motor operation. With the proposed method, other measures, such as battery energy storage systems and energy-saving lighting equipment based on LEDs, are also utilized for shipboard power demand management. [ABSTRACT FROM AUTHOR]

Demand Response (DR) provides an opportunity for customers to reduce their loads during times of high prices and therefore to shave the peak loads. The power outputs of large-scale generator units can be predicted and controlled easily; therefore, the pricing and reliability of conventional power utilities can be assessed straightforwardly. However, the customer loads are very variable and difficult to predict and control; therefore, the integration of DR might cause uncertainty issues on pricing and reliability and is essential to be further investigated. A novel uncertainty model for load reduction is proposed in this paper. The probability intensities of load reduction are first estimated from the measured load reduction variations. A multi-state probability model is then proposed for load reduction and the Markov process is used to calculate the state probabilities. A stochastic analysis scheme using Monte Carlo simulation for pricing and reliability taking the DR uncertainty into account is then investigated. Several cases are designed to compare the effects of DR uncertainty. Simulation results show that the proposed uncertainty model can be integrated into conventional economic dispatch to precisely evaluate the DR uncertainty on system operation and reliability. [ABSTRACT FROM AUTHOR]

This paper studies the system unbalance caused by rooftop Photovoltaic Generation Systems (PVGSs) in distribution networks and proposes an improved method. The voltage and current unbalance studies for three extreme cases considering all rooftop PVGSs being connected to one single phase and then the stochastic analyses for the integration cases of rooftop PVGSs are considered. These three extreme cases lead to severe system unbalance problems. An improving method that combines the On Load Tap Changer (OLTC) and the optimal phase arrangement of distribution transformers is proposed in this paper to mitigate the system unbalance. The OLTC-based improving method is applied first. If the system unbalance is still out of range, the optimal phase arrangement of distribution transformers is further used to mitigate the system unbalance problem. The objective function of optimal phase arrangement is to minimize the system unbalance with the constraints of voltage limits, line flow limit, etc. Test results show that the proposed method can improve the system unbalance significantly even under very extreme cases. [ABSTRACT FROM AUTHOR]

Fault Current Indicators (FCIs) with communication interfaces have been widely used in distribution systems to reduce fault-finding time. The effectiveness of a Fault Management System (FMS) composed of FCIs greatly depends on the performance of the communication network deployed by the FCIs and the failure rates of distribution systems. The conventional techniques only focus on the issues of optimal number and location of FCIs or communication network deployment individually; therefore, the effectiveness of an FMS cannot be assessed realistically. A systematic effectiveness assessment methodology for FMS considering the performance of the communication network deployed by the FCIs and the failure rates of distribution systems is vital and is investigated in this paper. A communication evaluation platform is designed in this paper and used to acquire the field measurements of communication parameters. The communication parameters, especially the Packet Success Rate (PSR), between two adjacent FCIs are measured, and the Probability Density Function (PDF) of the PSR can be built accordingly. The effectiveness of the FMS is then assessed by stochastic analysis considering the failure rates of the distribution system and PSR PDFs between two adjacent FCIs. Due to the characteristics of easy installation, maintenance, longer battery life, lower cost, and so on of ZigBee, the ZigBee-based FCI is mainly discussed in this paper. In order to efficiently find the communication route when a fault occurs, a fast communication route tracking method is also proposed in this paper and its feasibility is demonstrated in an actual distribution system. Experimental and simulation results demonstrate the validity of the proposed systematic effectiveness assessment methodology for an FMS composed of FCIs. The proposed assessment methodology can more realistically react to the actual conditions of the FMS and therefore save on installation time and costs. [ABSTRACT FROM AUTHOR]