Search

Tight sandstone reservoirs are ideal locations for CO2 storage. To evaluate the oil displacement efficiency and storage potential of CO2 in the tight sandstone reservoir in the Huang 3 area of the Changqing Oilfield, four kinds of displacement experiments were conducted on core samples from the Chang 8 Formation in the Huang 3 area. These experiments were performed using micro-displacement equipment, digital core technology, and an online CT scanning system; the different oil displacement processes were recorded as three-dimensional images. The results show that the CO2 flooding alternated with water scheme can improve crude oil recovery the most. Comparing the cores before and after the displacement shows that the amount of crude oil in pores with larger sizes decreases more. The remaining oil is mainly in thin films or is dispersed and star-shaped, indicating that the crude oil in the medium and large pores is swept and recovered. The CO2 displacement efficiency is 41.67~55.08%, and the CO2 storage rate is 38.16~46.89%. The proportion of remaining oil in the throat of the small and medium-sized pores is still high, which is the key to oil recovery in the later stages. [ABSTRACT FROM AUTHOR]

Aiming to solve the problems of poor CO2 displacement efficiency and serious gas-channeling and low well-opening rates in ultra-low permeability reservoirs, we carry out CO2 displacement experiments under different permeability reservoirs by using different development methods, water drive to gas drive procedures, and different fracture positions to clarify the effects of physical formation properties, injection methods, and fracture parameters on CO2 displacement efficiency in C8 ultra-low permeability reservoirs. The experimental results show that the recovery degree of CO2 miscible drive increases with an increase in permeability. When the gas–oil ratio is greater than 2000 m3/m3, serious gas channeling can be observed in both the miscible drive and immiscible drive. In addition, when the water drive is altered to be a gas drive, the water cut of 0.45 mD and 0.98 mD cores decreased, and the recovery degree increased by 13.4% and 16.57%, respectively. A long fracture length will deteriorate gas channeling and lower the CO2 oil-displacement efficiency. However, the fracture location is found to have little impact on the recovery of CO2 displacement. [ABSTRACT FROM AUTHOR]

Previous micro-scale studies of the effect of pore structure on spontaneous imbibition are mainly limited to invariable-diameter capillaries. However, in real oil and gas reservoir formations, the capillary diameters are changing and interconnected. Applying the lattice Boltzmann color gradient two-phase flow model and the parallel computation of CPUs, we simulated the spontaneous imbibition in variable-diameter capillaries. We explored the reasons for the nonwetting phase snap-off and systematically studied the critical conditions for the snap-off in spontaneous imbibition. The effects of pore-throat aspect ratio, throat diameter, and the pore-throat tortuosity of the capillary on spontaneous imbibition were studied. Through analyzing the simulated results, we found that the variation in the capillary diameter produces an additional resistance, which increases with the increase in the pore-throat ratio and the pore-throat tortuosity of a capillary. Under the action of this additional resistance, the snap-off phenomenon sometimes occurs in the spontaneous imbibition, which makes the recovery efficiency of the non-wetting phase extremely low. In addition, the main factors affecting this phenomenon are the pore-throat ratio and the pore-throat tortuosity, which is different from the conventional concept of tortuosity. When the snap-off does not occur, the spontaneous imbibition velocity increases when the throat diameter increases and the pore-throat aspect ratio is fixed, and when the period increases, i.e., the diameter changing rate decreases, the spontaneous imbibition velocity also increases. In addition, when the capillary throat diameter is fixed, a bigger pore diameter and a smaller period of sine function both inhibit the speed of spontaneous imbibition. [ABSTRACT FROM AUTHOR]

Spontaneous water imbibition plays an imperative role in the development of shale or tight oil reservoirs. Spontaneous water imbibition is helpful in the extraction of crude oil from the matrix, although it decreases the relative permeability of the hydrocarbon phase dramatically. The dynamic pore-scale network modeling of water imbibition in shale and tight reservoirs is presented in this work; pore network generation, local capillary pressure function, conductance calculation and boundary conditions for imbibition are all presented in detail in this paper. The pore network is generated based on the characteristics of Barnett shale formations, and the corresponding laboratory imbibition experiments are matched using this established dynamic pore network model. The effects of the wettability, throat aspect ratio, viscosity, shape factor, micro-fractures, etc. are all investigated in this work. Attempts are made to investigate the water imbibition mechanisms from a micro-scale perspective. According to the simulated results, wettability dominates the imbibition characteristics. Besides this, the viscous effects including viscosity, initial capillary pressure and micro-fractures increase the imbibition rate, while the final recovery factor is more controlled by the capillarity effect including the cross-area shape factor, contact angle and the average pore-throat aspect ratio. [ABSTRACT FROM AUTHOR]