Search

Flexible interconnection transformation of a distribution network using all-control power electronics technology will help to overcome the technical bottleneck of distributed generation (DG) penetration and high-quality power supply in the traditional distribution network. However, the flexible interconnection form that uses back-to-back power electronic converters to replace tie switches has disadvantages such as high cost and large footprint, so its mass promotion and application are bound to be limited. Therefore, a new topology of flexible interconnected distribution network with embedded DC system (FDN+EDC) with a better economy is proposed. Firstly, the topology of FDN+EDC is introduced to improve the controllability level of the distribution network under high percentage DG penetration, and is compared with the conventional flexible interconnection method. Secondly, in order to realize the coordinated optimal economic operation of source, network and load in the FDN+EDC, a dynamic reconfiguration model of switches status and continuous adjustment of flexible interconnection device (FID) are proposed. Then, to achieve a fast and globally optimal solution of the model, a hierarchical coordinated optimization strategy is designed based on an improved particle swarm algorithm for the optimization of discrete and continuous variables. Finally, the validity of the algorithm is verified, and an 88-node FDN+EDC is constructed to verify the advantages of the proposed embedded DC flexible interconnection topology and realize the joint optimal dispatch of network-source-load. [ABSTRACT FROM AUTHOR]

The use of the conventional dual closed-loop control strategy by photovoltaic (PV) plants with grid-connected inverters may weaken the damping of a power system, which may aggravate low-frequency oscillations (LFOs). This influence will become more severe as the penetration of PV plants increases. Therefore, it is necessary to incorporate damping controls into PV plants to suppress LFOs. This paper proposed an additional compound damping control (ACDC) system that combines additional damping control (ADC) for the inverter with ADC-based dynamic power compensation control (DPCC), allowing hybrid energy storage systems (HESSs) to suppress LFOs. First, the feasibility of suppressing low-frequency oscillations in PV plants is demonstrated by the torque method and a small signal model. Then, an additional damping controller is added to the active power control link of the PV inverter to enhance the damping abilities of the system. However, given that the damping performance of PV plants with only ADC is limited by the compensated power, PV plants require devices that can rapidly compensate for the damping power. Therefore, we added the HESS to the DC bus and proposed DPCC. Finally, a three-machine nine-node system for a PV plant was modeled and simulated in the PSCAD platform. The simulation results showed that the proposed control strategy could provide effective damping for interarea oscillation. [ABSTRACT FROM AUTHOR]

Health status assessment is the key link of transformer-condition-based maintenance. The health status assessment method of power transformers mostly adopts the method based on the health index, which has the problems of multiple parameters of each component and strong subjectivity in the selection of weight value, which is easily causes misjudgment. However, the existing online monitoring system for dissolved gas in transformer oil (DGA) can judge the normal or abnormal state of the transformer according to the gas concentration in a monitoring cycle. Still, there are problems, such as fuzzy evaluation results and inaccurate judgment. This paper proposes a dynamic state evaluation method for power transformers based on the Mahalanobis–Taguchi system. First, the oil chromatography online monitoring time series is used to screen key features using the Mahalanobis–Taguchi system to reduce the problem of excessive parameters of each component. Then, a Mahalanobis distance (MD) calculation is introduced to avoid subjectivity in weight selection. The health index (HI) model of a single transformer is built using the MD calculated from all DGA data of a single transformer. Box–Cox transformation and 3 σ criteria determine the alert value and threshold value of all transformer His. Finally, taking two transformers as examples, we verify that the proposed method can reflect the dynamic changes of transformer operation status and give early warning on time, avoiding the subjectivity of parameter and weight selection in the health index, which easily causes misjudgment and other problems and can provide a decision-making basis for transformer condition-based maintenance strategies. [ABSTRACT FROM AUTHOR]