Search

Three nanoscale metal oxides composed of nano TiO 2 , nano Al 2 O 3 , and nano MgO were added to the phase change microcapsule slurry for optimising the heat transfer behaviour. The thermal and rheological properties of the resulting microencapsulated phase change materials (MPCMs) and microencapsulated phase change material slurries (MPCSs) were characterized to determine the effects of added metal oxides in optimising the performance of MPCSs. The impacts of factors like metal oxides, concentrations, and flow rates on the heat transfer behaviour of MPCSs were investigated by forced convective heat transfer experiment with various working conditions. Compared to 6 wt% MPCSs, the heat transfer coefficients (h x) of 6 wt% slurries containing 1 wt% TiO 2 , 1 wt% Al 2 O 3 , and 1 wt% MgO increased by 4.0 %, 2.5 %, and 7.13 %, respectively. Nano-MgO showed the most significant heat transfer enhancement effect on MPCSs. Moreover, the heat transfer performance gradually enhanced as a function of the concentration for nano MgO. Overall, the addition of metal oxides enhanced heat transfer by increasing the thermal conductivity of the slurry, as well as improved the micro-convection effect. The proposed MPCSs are promising for applications in solar photovoltaic/thermal (PV/T) systems, chip cooling, thermal management, buildings, and automotive cooling. [Display omitted] • Forced convection heat transfer experiment were conducted with bonded triangular tubes. • Heat transfer enhancement achieved by optimising heat transfer medium and tube structure. • Metal oxide type and concentration have significant effect on heat transfer of slurries. • Nano-MgO showed the most significant heat transfer enhancement effect on slurries. [ABSTRACT FROM AUTHOR]

A visual experimental system was built to explore the effect of low-pore-density copper metal foam (CMF) on the heat transfer during paraffin wax (PX) melting, and the effective thermal conductivities of composite phase change materials (PCMs) were obtained. A three-dimensional mathematical heat transfer model was established, the microstructure of the CMF was characterized using a high-definition camera, and a physical model of the CMF ball was determined. The melting heat transfer mechanism of the composite PCMs was investigated through the experimental and simulation results, including the temperature distribution, velocity vector, solid-liquid interface, volume fraction, heat transfer mechanism, and heat storage performance. The results show that as the CMF filling ratio increased from 0% to 2.13%, the temperature gradients of the composite PCMs were 86.1, 74.6, 29.2, and 12.6 K, indicating that the filling of CMF effectively alleviates the thermal stratification phenomenon during PX melting. Incorporation of the CMF increased the thermal conductivity of the composite PCMs, but suppressed their natural convection. When the CMF filling ratio was less than 1.28%, natural convection dominated the heat transfer type during PX melting; meanwhile, when the CMF filling ratio was greater than 1.28%, heat conduction was the major heat transfer mechanism. The composite PCMs exhibited great heat storage performance when the CMF filling ratio was 1.68%, and the heat storage rate was 13.25% higher than that of pure PX with the same heat storage capacity. In addition, a theoretical calculation model for predicting the heat transfer mechanism of the composite PCMs was established, and the results show that as the CMF filling ratio increased from 0.43% to 2.15%, the natural convection proportion of heat transfer performance decreased from 82.74% to 13.99% during the melting process. • The mathematical model can well predict the melting heat transfer process of PCMs. • The filling of CMF leads the paraffin temperature distribution more uniform. • Natural convection is dominated as the CMF filling ratio is less than 1.28%. • The composite PCM has better heat storage performance as CMF filling rate is 1.68%. [ABSTRACT FROM AUTHOR]