Search

The interest in water-diesel emulsion fuel (EM) is increased recently because of the significant reduction in emissions from diesel exhaust, especially NOx and PM. In this study, a diesel engine configured for experimental investigations was fueled by ultra-low sulfur diesel (ULSD) and a diesel-water emulsion (EM). Both fuels' combustion characteristics were studied at a speed of 1500 rpm and using a load of 2.5 and 5 bars and variable injection timings. Regular and irregular pollutants were studied at the same conditions as well as at variable engine loads and speeds to better understanding for their formation conditions. As for the first time (in the case of an engine running with a water-diesel emulsion) irregular pollutants for EM emulsion were measured. The measured results indicated that the use of water-diesel emulsion reduced the heat released in the combustion chamber, which causes an increase in the brake specific fuel consumption and ignition delay. For the tested loads, the diffusion combustion duration for EM was decreased when the injection timing was retarded while the opposite was occurred for premixed combustion duration. The regulated NOx and Smoke Number were reduced when EM was used compared to ULSD while CO and HC levels were increased at low engine's speed and loads. Besides, these concentrations are depending on injection timing (they were higher at restarted timing). The unregulated emissions measured (Formaldehyde, Acetaldehyde, Methane, Acetylene, Ethylene, and propylene, Ammonia, and Acetone) were increased with using EM, especially at no and low loads, indicating the high impact of the combustion chamber temperature on these pollutants formation. • The effects of W/D emulsion use were compared to ULSD combustion in a diesel engine. • W/D emulsion reduced the combustion chamber's heat released causing high BSFC. • When W/D emulsion used, NOx and Smoke Number reduced at medium and high speeds. • When W/D emulsion was used, CO and HC levels were increased at low engine's loads. • Using W/D emulsion increased the unregulated emissions at no and low loads. [ABSTRACT FROM AUTHOR]

Solar energy technology has been evolving for the better part of the last decade. Worldwide innovation and support have created an alternative energy source that is helping to battle climate change. Photovoltaic thermal (PV/T) converters use various working fluids. Silicon carbide (SiC) nanofluid is employed in this study in the cooling application of a PV/T system. The aim of this study is to assess and evaluate the performance of PV/T collectors when running a SiC nanoparticle dispersed in water as the base fluid for both indoor and outdoor systems. The performance assessment includes thermal, electrical and combined PV/T efficiencies. Indoor and outdoor experimentation is done to accurately assess the performance enhancement hypothesized by the authors. Furthermore, a comparison is made between the indoor and outdoor results to validate each experiment and draw conclusions. The indoor system results were close to the outdoor experiment, suggesting a performance enhancement with an incremental efficiency rise. [ABSTRACT FROM AUTHOR]