Search

The objective of this paper is to optimize the passive design of newly-built residential buildings in hot summer and cold winter region of China for improving indoor thermal comfort while reducing building energy demand. In this respect, this paper investigates the performance of a representative apartment building in the city of Shanghai and evaluates the optimum solutions by using a developed optimization approach, which includes three major steps of 1) setting the model for multi-objective optimization, 2) sensitivity analysis for reducing the dimension of input variables, and 3) multi-objective optimization by using the Non-dominated Sorting Genetic Algorithm II (NSGA-II) coupled with the Artificial Neural Network (ANN), among which a novel indicator for evaluating the annual indoor thermal comfort of residential buildings of Shanghai named Comfort Time Ratio (CTR) is defined based on the modification of Szokolay’s theory in terms of bioclimatic analysis, and the impacts of passive design variables on the indoor thermal comfort and building energy demand in terms of different directions are comprehensively investigated. Results of the multi-objective optimization indicate that the residential buildings of Shanghai have a great potential in comfort-improvement and energy-saving. A series of novel optimal passive design tactics for residential buildings in Shanghai are derived accordingly which could be easily understood and conveniently carried out by the architects in practice. [ABSTRACT FROM AUTHOR]

Abstract: A traditional Chinese heating system, the Chinese Kang, is used by 175 million people in detached houses in the rural regions of China, especially in Northeast China. This system utilizes biomass such as corn stalks, straw, corncob and energy plants as the heat sources. The objective of this paper is to establish a set of models to simulate the energy performance of the Kang heating system in one Chinese detached house. An experimental field study was carried out to collect practical parameters in a newly constructed Chinese detached house. The dynamic performance of the Kang heating system was simulated by using IDA-ICE 4.0 embedded with an empirical model built in the field study. The results show that the simulation can obtain good overall agreement with the field measurement results. It was confirmed that the Kang model created by IDA-ICE 4.0 is capable of simulating the performance of the Kang system and of calculating energy consumption in the detached house. Moreover, the result reveals that the thermal environment in the present Chinese detached house is still poor during the severe cold season if only the Kang system is used to heat the whole house. [ABSTRACT FROM AUTHOR]

Abstract: Mandatory energy codes to curb energy use of residential buildings have been formally launched in China for more than two decades but little has been publicized in literature. Similar codes are not available for residential buildings in Hong Kong, but most residential buildings in Hong Kong, especially public housing estates, are HK-BEAM certified to demonstrate their compliance with regulatory and basic design requirements. Given HK-BEAM is internationally recognized and there are doubts about the effectiveness of the China codes, how the energy efficiency of the HK-BEAM certified buildings compare with buildings in compliance with the China codes is of interest to most building designers and policy makers. This paper describes how the energy efficiency of a case study building in compliance with the China codes compare with the one in compliance with HK-BEAM. The energy simulation by HTB2 and BECRES reveal that the case study building in compliance with the China codes is 51.1% better in energy use. In the study, the relative impact of each compliance criterion on energy use and cooling load has been quantified by sensitivity analysis. The sensitivity values indicate that energy use is most sensitive to air-conditioning operation hours, indoor design temperature, coefficient of performance (COP) of the room air-conditioners (RAC) units, and the envelop characteristics. The results of this study indicate that a HK-BEAM certified building cannot satisfy the China codes requirements. This provides good reference to the policy makers, the building owners, and to the China and Hong Kong Governments when considering reciprocal recognition of building energy codes. [Copyright &y& Elsevier]